Apple Application Support was not found on new itunes update.

I have unstalled and installed the newest itunes update about 10 times now.  I still get (in itunes and itunes helper) "Apple Application Support was not found. Apple Application Suport is required to run itunes".  Please uninstall itunes, then install itunes again.  Error 2 (Windows error 2)".
Can someone please help ! ! !
Desperate Dave

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Similar Messages

  • I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2

    I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
    We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS1363 Trying to load my new Ipod Nano onto my pc.  Have tried numerous times to load however after having gotten the ITunes download and attempting 2then load onto Nano get an "Error 2" message along w/"Apple Application Support was not found". Using Win

    Trying to load my new I Pod Nano onto my pc.  Have tried numerous times and keep getting same message..."Error 2...Apple Application Support was not found.  When I look at my control panel the only program that shows is "I Tunes".  No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86). 
    Any assistance would be greatly appreciated. 

    When I look at my control panel the only program that shows is "I Tunes".  No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
    That's an extreme case of this.
    We'll try doing standalone installations of all the supporting programs.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
    Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
    Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
    Do those four installs go through okay? If so, does your iTunes launch without any errors now?

  • TS5376 Have new dell xps system and cannot install I tunes: "Apple Application Support was not found"...Error 2 (Windows error 2)....any ideas??

    I am having tremendous difficulty installing I Tunes onto my new Dell XPS (Windows 8). First it downloaded but my library wasn't there and it would not recognize my ipod.
    Then I uninstalled it and now it won't reinstall saying:
    Apple Application Support was not found.
    Apple applicationSupport is required to run iTunes. Please uninstall iTunes, then install iTunes again.
    Error 2 (Windows error 2)
    I've tried uninstalling and reinstalling a few times.......not working.
    Any ideas??

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Windows 7 - Apple Application Support was not found.  Error Message

    Hello Folks,
    i keep getting the following message, despite the fact that i have uninstalled Itunes and then installed it again a few times.
    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Can anyone suggest any help?
    I have a Windows 7, new Dell Latitude machine.
    THank you,

    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Is Apple Application Support currently showing as installed in your Uninstall a program control panel?
    If not, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • After i upload it, it says "Apple Application Support was not found"

    So the iTunes with all my songs, is on my old computer and to share it throughout the house to my new computer i need to download iTunes 9, which I did, and it said it was successful. But then when i tried to open iTunes, it says "Apple Application Support was not found. Apple Application Support is required to run iTunes, please uninstall iTunes then install iTunes again" Well this is the third time I've tried, I downloaded the older version and it said my library had been created on a newer version. I have no idea what to do. Oh and I can't get my disk drive to work so I can't do a disk back-up.

    Hi, decent.devil.
    I would recommend uninstalling iTunes, all of it's components and reinstall.  Below, I have included an article that covers this process.  Make sure to uninstall all programs in the order specified. 
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Cheers,
    Jason H. 

  • Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.

    I need help! I got my new iPod and I need to install iTunes on my laptop because I didn't have it before. I install it and I go to open it and it says "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again." I've done that three times and it does the same thing... WHAT DO I DO???

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Keep being met with the same error sign: 'Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstal iTunes, and install again. Error 2'

    iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error  'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??

    Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
    Uninstalled /reinstalled
    Disconnected all firewalls and antivirus and even uninstalled them with Revo..
    with that effort..I then used winrar to extract to a file and manually install each piece..
    all load EXCEPT Apple Application Support..but only if I do it manually..
    Quicktime had to be manually installed.
    Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
    Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
    Windows Installer likes to quit alot..not sure how to fix that..urgh
    Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
    Any help is much appreciated!

  • Error message when installing iTunes on Windows 7, "Apple Application Support was not found, Error 2"

    I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes and then install iTunes again. Error 2.   After this I

    So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
    Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Unable to Reinstall iTunes - error message: "Apple Application Support was not found"

    When attempting to update my iPhone today, my iTunes would not open.  I followed the instructions to completely uninstall iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Applications Support.  I then attempted to reinstall iTunes, and everything went perfectly until I attempted to open iTunes.  When attempting this, I am receiving the message "Apple Application Support was not found.  Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.  Error 2 (Windows error 2).  Any advice on how to "get this back"?

    Read through the user ip http://discussions.apple.com/docs/DOC-6562 for the best solution.

  • I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

    Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer 

    Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
    tt2

  • When I download Itunes I get an error that my apple application support was not found how do I fix this error

    I have downloaded, uninstalled and redowloaded Itunes about 50 times and I continue to get the error that my apple application support was not found and that I should uninstall and reinstall Itunes.  I can not get to my music and this is starting to really make me mad.  Can anyone (other than some bogus virus filled program) give me a hint as to how I can fix this so I can play my music?

    Hi jahhaas,
    Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
    http://support.apple.com/kb/HT1923
    Cheers,
    GB

  • It says this when I try to open iTunes:  Apple Application Support was not found.   Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.   Error 2   I've tried uninstalling it and installing it several t

    It says this when I try to open iTunes:
    Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
    Error 2
    I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FD

    You have missing information in your Windows programming. 
    You need to repair your computer so it can run iTunes.  If you plug those error codes into your browser you may get an answer.

  • I'm getting the error msg "apple application support was not found.  Apple application support is required to run itunes. error 2.  How can i fix this?

    Hi,  I was running itunes software just fine. I got some malware and unintalled everything that was from apple.  Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
    What can I do to fix this?
    Thank you.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for

  • Check Box Bug in Application Express 4.0.2.00.06

    Hi All I was wondering if someone can help me with checkboxes, I'm trying to implement in the report. I was following Oracle instruction, but it does not work in my application, for some reason. First Issue: If I add in a query report the following l

  • Premier Pro has encounter an error...

    Does anybody knows what this error means?  volume/buildisk/builds/ringo64/shared/adobe/mediacore/backend/make/../src/clip/masterclip. cpp-2892 The media + file was given to me, I worked on the file and sent it back, now they're getting this error and

  • Indesign CS6 crashing all the time when Placing an image

    Repost from Installation forum. Indesign from Design Standard CS6 installed about 2 months ago on a Dell Precision Laptop with 4 Gb Ram Windows XP SP03.  No other programs are running.  I open Indesign and create a document 4.8" high x 4.7" wide.  I

  • Flash CS5 locks settings for new AS3 document

    New install of Flash CS5.5, and I just opened it up after three weeks and the latest update.  I create a new AS3 document, 940 X 226 with a black background, and work on several animations. I close the document, and click File>New, and choose a new A

  • How to get an international English date format if I'm in a country where the date format is something else?

    I'm physically in Malaysia and my iPad sets Malay as my default time format setting. How to get rid of the whole thing of using Malay as my date format and use English as default for everything including date and time ? Under setting> general > inter