Apple applications including Safari cannot connect to the internet

Safari will not load any pages including apple.com, amazon etc. (firefox works fine). iTunes does not run either. I tried the software update, restarting machine, but no luck. Has anyone here encountered this before?

I still wonder why Safari and iTunes needed this new connection while other web based applications (Fireworks worked fine under the original configuration.
Safari seems to like a specific location for the Network connection. I don't try to figure out "why"...it's enough for me that it works. Glad it works for you too. Glad to help.
. Please consider marking this post "solved" to the far right of my name, next to the post "solving" your question.
Helpful for others looking for a solved solution to a similar question, also helpful for me.
Aloha from Big Island.

Similar Messages

  • My wifi shows a strong signal but then i cannot connect to the internet (safari or apps). what is wrong? internet is working fine on my laptop.

    My wifi shows a strong signal but then i cannot connect to the internet (safari or apps). what is wrong? internet is working fine on my laptop.

    Is this a new issue with your iPad meaning that you have been able to connect to the Internet in the past?
    If it worked before try rebooting your router - unplug it for about 30 seconds and then plug it in again.
    Sometimes restarting the iPad is all it takes as well. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You can also reset Network Settings - go to Settings>General>Reset>Reset Network Settings.Or go to Settings>WiFi>tap the blue arrow next to your network>Forget this Network. In either of those cases, you will have to rejoin your WiFi network and enter your password again.

  • I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet.  I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet.  I al reset my router and still not change

    I have 2 Apple TV's in my home.  One is 2nd Generation and the other is 3rd Generation.  One one that is 2nd Gen cannot connect to the internet.  First I restarted, the I rest it and I even changed the password. still no connection.  So I purchased the 3rd Gen TV and I have to same problem, but they are in different rooms.  Before I had no problem with my 2nd Gen TV, but then one day it did not connect.  I even had my internet provider come and check my internet and it worked ok, but no connection with the Apple TV.  I have tried everything but no results.  Somebody please help me.
    Regards,
    Richard

    Hi richardwilliams51,
    If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    If that does not completely fix your Apple TV, you may need to restore it, using this article -
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Your Apple TV is connected to your wi fi network but cannot connect to the internet.  Airplay logo not available on ipad3, iPod touch3g and showing intermittently in iTunes on windows laptop.  Switched ISP a few days ago.  Entered pass key info on all.

    I switched ISP a few days ago and had problems with airplay since.  After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything,  Apple TV shows:  Your Apple TV is connected to your wi fi network but cannot connect to the Internet.  Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again.  Same with itunes on windows laptop.
    Can anyone help?
    Bob

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • My wifi diagnostic says I am connected, but I cannot connect to the internet (safari), iCloud Mail, or any other sites.  Help?

    My wifi diagnostic says I am connected, but I cannot connect to the internet (safari), iCloud Mail, or any other sites.  Help?

    Power cycle (turn off and on) the router. In System Preferences -> Network, under WiFi does it say Self-Assigned IP Address? Click where it says location in the network's pane of WiFi, click edit location, click the plus icon and type 'test' and press done, then press apply on the next window. Click advanced then in the preferred networks tab, make sure your wifi network is at the top of the list, if it's not then drag it to the top, on the TCP/IP tab, click renew DHCP lease, on the DNS tab, click the plus icon at the bottom left, add two new dns servers: 8.8.8.8 and 8.8.4.4, press OK, then press APPLY on the next window. restart the mac and see if it's fixed.

  • Apple TV connects to the network but cannot connect to the internet.

    Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective???  Thank you!

    This might help:
    Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
    Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
    Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
    Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
    Enable Wireless MAC filter
    Enable "Permit PCs listed below to access the wireless network"
    Enter the Apple TV's MAC address
    Click "Save Setting"
    When I did this the network connection immediately started working.
    Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

  • HT1595 Apple tv will connect to the network but cannot connect to the Internet

    My apple tv is connecting to my network but it says it cannot connect to the Internet. I've already tried restarting everything and I've also connected it to my portable mifi network with same results. Anybody have any ideas?

    This is what the MAC address clone looks like:
    Should I enable it?  If so, should I put something in the MAC Address?  What?  I was able to connect it thru my MiFi, but not my home network.  Until today, it's been connected to my home network for about 8 months with no problem.  Haven't used it for a while...not since I got a new router.

  • Apple TV cannot connect to the Internet

    Hi,
    Hope someone can help. I haven't used apple TV for a week or so, and when I have just turned it on again, I found although it finds my wireless network, it cannot connect to the internet as it was doing since I got it over a year ago. No settings have changed, and my MacBook, iMac, iPhone, Wii and PS3 all still connect fine. I tried a system restore, but now apple TV won't start up as it still can't connect to the internet. I have also tried rebooting my router. Does anyone know what might be the problem?
    Thanks for your help,
    Pete

    I have the exact same problem and my home network have a max capacity of 250 devices, which Im not any way near off.
    I have one pc connected via ethernet, so I always have an option of connecting if WIFI fails.
    I have one iMAC connecyed via WIFI
    I have one Apple notebook conenected via WIFI
    I have one Nintendo Wii connected via WIFI
    And, I have one Apple TV which will not connect while other devices are connected. If I disconnect the notebook and iMAC the Apple TV works fine.

  • Cannot Connect to the Internet ?

    So I am a new iPad user
    very new 3 weeks
    It started this morning when I downloaded updates to some of my apps - I then sync'd it with my itunes on my windows vista pc...then i noticed that the iPad screen looked really heavily pixelated in some of the apps, that weren't normally pixelly
    I tried restoring my settings on the iPad only, this did not delete my apps or data
    then it asked me for my wifi password again, which I put in
    I then tried to access the internet on safari, and through various other apps, I get the error message, "cannot connect to the internet"
    I tried syncing it again this evening, and still nothing
    I am not sure what to do....

    Have your:
    - Reset your iPad:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network settings:
    Settings>General>Reset Network Settings
    - Powering off and then back on your iPad.
    - The troubleshooting here:
    http://support.apple.com/kb/TS3237

  • I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.  Can anyone help me?

    I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password.  Can anyone help me?  (This is an ipad question).

    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Issue with OBIEE 10.1.3.4.2 in MUDE mode

    Can any one help me in getting bug list of OBIEE 10.1.3.4.2? Actually we are experiencing issues in using MUDE. When creating any new logical or use any physical objects by creating alias to it we get issue with the newly created objects. Hence we ar

  • How to use the static lib of berkeleydb in VC6?

    I know there is a libdb45s.lib. But when I try to link my project to it, VC6 reports many errors. Even the getting start examples cannot link correctly. The documents coming with berkeley db do not tell me how to link project to the lib, no matter st

  • For loop in validation not working

    Hi, I am trying to put validation on a tabularform, such that column1 is not greaterthan column2 value. begin apex_application.debug('start check'); for i in 1..3 loop apex_application.debug('i='||i); if apex_application.g_f05(i) < apex_application.g

  • Using ALV function with tables

    Hello Everyone, Can anyone pls explain with an example how to use ALV in unicode to write out a table.  Since following statements is porducing error: write:/T510N, 'T510N was changed'. it gives uncompatible error.  In non unicode system it works fin

  • Subcontrac vendor delivers finished goods to customer. (Third party?)

    The business process is as follow: We provide components to the subcontract vendor and they will delivery the finished goods directly to the customer. How to acheive this scenario in SAP? Can there be a statistical GR like third party processing? (an