APPLE CHARGER NOT WORKING WITH IOS5

Hello,
      Upgraded ipad 1 to ios5.  Apple charger, A1357, no longer works. 
     I get this message:    "not charging"  in upper right corner.
     When I use my tripp lite  power strip with usb port, I get :  Charging is not supported with this acessory.
     It will be hard to use this ipad if I cannot hook it up to power.
     18% power remaining.

I  should add that the tripp lite charger was working before as well.

Similar Messages

  • Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

    genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

    Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
    Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

  • Why apple charger wont work with some ipods?

    why apple charger wont work with some ipods?

    I can charge my 5th generation Nano either with the Apple USB cable connected to my Mac or when it is plugged to the wall outlet.  Not suprisingly, it recahrges much faster when plugged into the electric outlet.
    Which Nano do you have?

  • Apple tv not working with panosonic TH-50PX75U old.

    Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • Apple tv not working with emerson tv. Why?

    i just got a new apple tv. I have a emerson tv and it does not work with my tv. i have tried all options and trouble shooting. It just doesnt work. Does apple tv just not work with emerson tv?

    appletv works on all tv's which support hdmi 1.3 with hdcp

  • Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

    Since updated softwear on iPad to 7.0 Apple TV not working?

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • S-video output does not work with iOS5.1.1 via ipod dock

    After upgradig my Touch to iOS5.1.1 I cannot see video etc. on my TV via my Ipod Dock.
    It was working fine before the upgrade.
    The ipod is telling me, that it's connected to the TV, but nothings appears on my TV.
    It was working fine before the upgrade.
    I have tried to contact Apple Support but I have not succeded finding out how to contact them about the bug.
    Anyone else experience same problem?
    Regards
    obertel

    I have the same issue with my iHome iW1 AirPlay. After updating both my iPhone 3gs and ipad 3, it cannot use my iW1 with airplay. Also when I plug one of my iOs device to the iW1 I get the infamous "Charging is not supported with this accesory"....
    Anyone got a workaround?

  • Apple TV not working with new 23" cinema display

    OK so I finally found a functional use for my new Apple TV, which has been sitting unused in my living room. My MacBook Pro already connects to the HD projector in there, so Mac TV is just less functionality and redundant.
    I decided the only use I have for a keyboardless Mac interface for just music, podcasts, photos, and videos is the bathtub.
    Being the Mac fanboy that I am, I wanted the solution to be all Apple.
    So I headed down to my local Apple Store with the intention of buying a new 23" Cinema Display for my Apple TV and an iPod HiFi for the sound. I was dismayed to see them showing off the Apple TV on Sony LCD TVs. Why wouldn't Apple want to sell people a triple-play package and have it set up as a demo? After all, they weren't selling the Sony TVs anyway.
    But my first sign of trouble was the very nice store employee who didn't know if the Apple TV would work on a cinema display. But he definitely wanted to find out when I got home. Searching here, I found posts that seem to confirm that it would work, but the actual source is related to an older ADC cinema display, not the new ones.
    I set everything up and used a Toslink-minijack adapter to run the optical digital audio from the Apple TV to the iPod Hifi. I used an HDMI-DVI-D adapter to connect the cinema display to the Apple TV. I powered it all up.
    I got the white Apple logo on the screen, then everything went black. I used the Menu and + keys on the remote for 6 seconds to cycle through the resolutions. Still all black. I used the Menu and - keys on the remote to reset to factory settings. Again booted into blackness.
    Interestingly, while using the + and - keys on the Apple TV remote, the iPod HiFi volume was lowered and raised simultaneously with the moving of the menu selections in Apple TV (I could hear the clicks). What this means is, 2 remotes, each paired to each device, will be needed for proper operation. This is why having too simple a remote is lame.
    At this point I am dead in the bathtub water. I drop more money on Apple than it costs to get a new iMac (which is plan B) just so I can give the Apple TV a shot in my bathroom. But it all doesn't fit seemlessly together on first try.
    Any suggestions? Could the HDMI-DVI-D adapter be blocking the HDCP signal needed to display an image? Is DVI-D the wrong adapter to use? Any help is appreciated.

    I've not been convinced a monitor will work with the tv, but I have to accept the word of those that have had success. I'm not so certain that a monitor is a suitable first choice, maybe if you have one lying around OK, but to buy one instead of a tv is not only a very expensive alternative but even if it works you will have no way of controlling the brightness etc.
    Any suggestions? Could the HDMI-DVI-D adapter be blocking the HDCP signal needed to display an image? Is DVI-D the wrong adapter to use?
    Possibly, Did you ever manage to repeat getting the apple logo or indeed anything even if only for a few seconds. DVI-D or DVI-I would be the right connector, don't use a DVI-A

  • Apple tv not working with my tv

    I have 3 TVs at home,and apple tv is only working with one tv,I have tried everything with the other 2 TVs but it's not working

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports 720p
    Make sure your TV supports HDCP

  • Apple Mail not working with IMAP account

    I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
    I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

    I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
    I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
    I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
    I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
    Can anyone help with these IMAP access problems?

  • Apple ID not working with facetime and messages what to do

    I'm not sure when this issue occurred but I cannt use my facetime and messages at all. My apple ID works with everything else but facetime, messages and oh yeah icloud . I have changed my ID like three times and I also looked at my DSM but nothing. I'm frustrated because I live in Trinidad where there is no apple store to correct this issue. Please help someone!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Image capture not work with ios5

    Image capture/iphoto couldn't recognize my iphone4 after update it to ios5.

    I WAS having the same problem. With the introduction of photo stream, Apple currently is not allowing you to use the photo stream option concurrently with the manual import option with Image Capture. You have to choose one. My situation was that I had old picture on my iphone which were not being streamed and I hate using iPhoto.
    This is what you have to do to use Image Capture on Mac... again...
    1. Disable photo stream on your iphone
    2. Connect iphone to mac
    3. Open image capture
    4. Your iPhone will show up under devices and proceed normally
    5. Voila!
    Rationale: Like I said, since Apple does not give you the option to use both features (manual import via Image Capture or photo stream) you have to choose one, and by disabling photo stream on iphone, it lets you import images via Image Capture as you would normally.
    You can use Keaggy's method, but I hate iPhoto. iPhoto does not let you choose your own directory which is annoying.
    So those who want to go back to your regular ways, use the method above.
    Message was edited by: schandi

  • Non Apple Apps not working with Not.Centre

    I've restored my iphone 4 twice now, each time I've started a new phone and gone through the set up on the phone. I've tested my mail app, messages app and reminders app and they work faultless with Not.Centre but when I downloaded Twitter Inc. from the app store and got an @ reply, I didn't get a notification. I've gone through all the settings, in both the Settings App and even within Twitter itself and have TURNED ON all notifications but still nothing.
    I'm not going to restore again, it's just a waste of time. Does anybody have a fix for this?
    Cheers.

    Hi Groovy32,
    So after the iOS update all Apple apps work fine but no non-Apple apps work?  I just updated my iPhone 6 Plus last night and haven't seen an issue so let's go further with troubleshooting as in
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    For example, check for App updates, try installing another app or deleting and reinstalling one that's not working.
    Regards,
    Nubz

  • Camera is not working with iOS5

    All of a sudden, my Camera function is not working anymore after upgraded to iOS5.

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
    Yes, a fix is coming soon.

  • Apple tv not working with itunes match

    I bought Apple Tv last week and also bought the Itunes match , but whenever i open music on my apple tv , it says
    "Itunes Match "
    " Setting up your apple tv to stream music from itunes match . This may take a few minutes,depending on the size of your library and internet connection speed "
    i have already turned on itunes match on my Apple Tv and computer . Still its not working .

    I had a similar issue.  As of September 29, 2014.  After setting up iTunes Match on my Mac through iTunes, iTunes Match was not working on Apple TV.  The weird thing was that it worked on my iPhone 5 and Late 2013 iMac.  Strangely Apple TV was the newest device.  I and the newest OSs available for all my devices (iMac, iPhone and Apple TV - either OS X 10.9.5 and/or iOS 8.0.2).
    I called Apple Support and spoke with someone who had me log out of and back into my Apple account through Apple TV.  I was then prompted to activate iTunes Match on Apple TV (3rd Generation).
    That fixed the problem for me.
    Be advised that you need to remember your Apple TV password in order to sign back in.  Apple TV does not cache Apple ID passwords.
    I suggested to the Rep that they need to make the process much simpler via a way to Refresh iTunes or, at least, add Keychain to Apple TV so that I did not have to go through this again.  I suggest other users make the same requests through Apple Feedback for Apple TV.

Maybe you are looking for

  • I am Getting an error as file not found when i am trying to open vm virtual

    I am getting an error when i am trying to open my oracle vm virtual box The error is as follows Runtime error opening 'C:\Users\S Pavan Kumar Reddy\VirtualBox VMs\Windows\Windows.vbox' for reading: -102 (File not found.). E:\tinderbox\win-rel\src\VBo

  • Camera RAW update for Nikon D3300

    I recently purchased the Nikon D3300 - I use PS CS5.1 and do not plan on upgrading right now -  problem is that it won't open RAW files for the D3300 and I can't seem to find the correct update for Camera RAW to be able to process them  - anyone have

  • The possible scratches on the mount

    Please, may anybody help me? I was going to buy a canon rebel t3i in a shop but found these scratches on the mount. Is it the serious problem? Does it mean that the camera was used by somebody or it is normal? 

  • Oracle 8i full export fails (ORA-00904)

    Hello Guru's. I encounter this problem when i try a full export. Database version is 8.1.7.4 and the export utility is also 8.1.7.4 When i try exporting it generates a ORA-00904 error. I traced on this error and see the following: *** SESSION ID:(8.5

  • LSMW issue

    Hi, I have developed LSMW for the Tcode VK11.It contains two screens 0100 and 1945. Here in the screen 100 i am entering the condition type ZXI2...and in the screen 1945 values i am entering are 5 field values. After saving the record control comes t