Apple Cinema 23" on a PC? can't get it to work just has a blank screen?

Sorry this may have been asked a million times but i have a 23" cinema HD display and i'm try to connect it to a laptop PC with the convertor to vga and no matter what i try it has a blank screen with the white power light. I have tried to change the res to the lowest it doesn't work what am i doing wrong please help!!

You can't use a simple VGA to DVI adapter, since VGA doesn't have the digital video signals needed by Apple displays. You need a VGA to DVI converter, such as
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=4341>

Similar Messages

  • Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?

    adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?
    I want the capability of adobe reader to just run on one screen.

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

    PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

    I have a new apple dvd drive, I was told it will work with my imac,  but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

    If it is this drive, note that it is for MBA's and Mini's only:
    http://store.apple.com/us/product/MC684ZM/A
    Ciao.

  • Apple Mini-DVI to Video Adapter - Can't get it to work!

    Bought the Apple Mini-DVI to Video Adapter to hook up my Macbook to my TV. I tried it when it first arrived and it worked within minutes of setting up. Great! I go to set it up and use it again a week later, and it wouldn't work at all. I went through every possible setting I could to try and get it to work, nothing. Do these things have a tendency to go out or short out or something? I'm getting nothing but scrambled screens, grey screens, etc. Nothing seems to work.
    http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY
    Any other solutions for playing my laptop on my TV?

    Hey Rob,
    Is your profile information accurate? The MacBook 2,1 was introduced in November of 2006 and discontinued in May of 2007, so the mini-DVI to video adapter ought to work.
    What, exactly, do you see on your screen? Are all of the connections nice and snug? Do you have another RCA cable you can try? You can use a white or red one if you want; they all will work as long as you're connecting the video adapter to the yellow port on the TV.
    ~Lyssa

  • Can't get photoshop to work, just installed it.

    I just loaded photoshop 7.0 and some of the features are not working! I can't change text, etc. What can I do?

    Photoshop 7 (2002),  My system is Windows 7. The computer is very new, practially nothing on it.  I can open files, but I can't get the brushes to give me choices, or text, or move the window around. I have used this program at my old work for years and I am pretty familliar with it. I am wondering if I have to change some settings in preferences to more or less memory to allow it to work or cache? I really don't know that area. Or is there a update or patch that I need to get this running? I am fustrated, because I can't afford the newer versions! and I need this for my business. Help!

  • Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

    hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

    Did you try everything here?
    iOS: Troubleshooting Messages
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

  • My iPhone 5c freezes after deleting messages and then I can no longer receive them. Just shows a blank screen of a new message

    Every time I try to delete my messages, I will delete and then restart the app or it won't work. When I restart the app, it takes me to an empty message screen and then will completely freeze. My phone will vibrate like I am receiving messages, but nothing shows up on my phone. Recovering the phone is not working, as the computer no longer recognizes the phone as a device.

    Hey there hockeychic3,
    If your Messages app is still behaving unexpectedly, then based on the symptoms you are describing I would troubleshoot the software by first quitting the running apps on the device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Let me know how that goes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My touchsmart 300 wont start just has a black screen can you please help

    My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help

    My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help

  • I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?

    I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.

    Hello,
    You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
    http://support.apple.com/kb/HT1619
    If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
    Best of luck

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • HT204053 i have put in my apple id and password but still can not get imessage and facetime to work

    I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks

    Please try to sign in at https://appleid.apple.com
    Check if your new username/email address is verfied
    If this works, delete your account on your iPhone (Settings > iCloud)
    Sign back in

  • I purchased a MyBook Studio 4gb external hard drive.  I can't get it to work properly.  WD have assessed it and say its fine and that the problem is with Apple?

    I purchased a MyBook Studio 4gb external hard drive.  I can't get it to work properly.  WD have assessed it and say its fine and that the problem is with Apple?  Any ideas?

    Hello EucaBlue!
    So in Disk Utility, with the external harddrive selected, go to the Partition tab, and then under "Partition Layout:" select 1 Partition.
    After than, verify that it is formatting the drive as "Mac OS Extended (Journaled) under "Partition Information"
    Also verify that it's using using the GUID Partition Map under the Options button at the lower left of this window.
    Then click apply and confirm that you want to format the drive. It will ask you if you're sure, and probably for an Administrator password.
    Once your harddrive is formatted properly, you should be able to use Time Machine, or any other Mac backup software.
    Happy tinkering!
    Paul

  • The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    Yes, if you purchased it in an Apple store, they should be able to assist you.  Bring your MBP with you as well as the Drive.
    Ciao.

  • I bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

    i bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

    Apple doesn't send access keys for apps. Which app was this?

Maybe you are looking for

  • List of issues with new look bt vision

    Hi, There are a lot of things that are no longer present in the new look bt vision. As such they out weigh the "benefits" Will these issues be addressed at all - and is BT aware of them? Issues: 1. crashing - it crashes randomly once a week - the old

  • Sequence Settings for Computer-targeted Projects

    Hello, It seems to me -based on a scan of the forum's topics- that there are many people who would like to use FCP for creating computer-targeted output, that use still images as the source material. That is, projects not destined for tape or broadca

  • Using APEX_COLLECTION in a DB-Function??

    Hello, in Apex I would call a PL/SQL page process (anonymous block), which invoke a database function (called A). This db function, A, invokes a further db package via database link on a remote database. The package on the remote database writes its

  • How do you reference the current version of DIAdem through an automation reference?

    I need a way to find out which version of DIAdem is active. REading the registry doesn't help, because DIadem simply registers subkeys and doesn't keep track of multiple versions. Can I do this via the DIAdem API? Thanks.

  • File Backup on IPad

    There is an ipad app for backing up ipads with Asigra. Is there any way to backup files and email attatchments using this product. Are work arounds for a deployment.