Apple Cinema Display on Windows 7

Where can I find the Windows 7 x64 driver for Apple Cinema Display? I have a yellow warning for an USB Input Device because of it. The device IDs are:
USB\VID05AC&PID_9223&REV0114
USB\VID05AC&PID9223
I tried installing WinAcd, but I can't install it, I receive the error "the installer was interrupted".

obviously I troed to install WinACD but it wouldn't work (WinXP driver)...
thanks for your help

Similar Messages

Apple Cinema Displays and Windows

I know it will work with windows. But what kinda of
controls will I get? Since there is no controls on
the monitor it seems besides brightness. Or it all
depended on the graphic cards to be in control?
What is default color temp then?
Windows XP Pro

WinACP <http://sourceforge.net/projects/winacd/> will give you a monitor control panel in XP.

Do Window Vista Dirvers exist for Apple Cinema Displays ?

I am using a 23 inch Apple Cinema Display with a windows Vista box and noticed it is using a generic HD driver. Should I have a diver specific to the ACD? Do any exist?
Thanks
Power Book Mac OS X (10.4.9) 23 inch ACD

I have one more idea that might help people. This is a theory on my part, so bear with me.
You can extract all of the files from WinACD and use just the INF files get your monitor to display at the proper resolutions. To do so, do an Administrative Install using the following command:
msiexec /a <path to msi file>WinACD-0.4.6.msi
This will extract the files to C:\Program Files\WinACD, but not install the application onto the system. You can then go to:
Settings - Control Panel - Display
Click on Settings and then Advanced
Click on Monitor and then Properties
Click on Update Driver... and find the acdmonitor.inf file in C:\Program Files\WinACD\noarch.
Theoretically that should work. I cannot test the very last step for I have it working correctly already.
I will tinker with this on Vista 64 this weekend and see how to make it work. You should not have to do this with Vista 32. I had to turn of the User Account Control in order to be able to install it. With it on, WinACD says that it could not install because it was interrupted.
Other OS
Other OS

Mac Pro - Windows 7 - Apple Cinema Display

Hi -- after years of not installing Windows on a separate drive, I finally did it. The install went failrly well, wireless devices work in Windows 7. My remaining issue is that Windows 7 doesn't seem to recognize the Apple Cinema Display (ACD) with the Mini Display Port. If I switch to a different DVI monitor, the display seems fine. However, if I go back to the ACD, the display shakes upon boot up, and the resolution, screen size in off and a generic display is seen in the Control Panel. Sometimes, it does recognize the ACD, which is weird, but never on boot up.
Is the only solution running a DVI adaptor and not using the ACD with the Mini Display Port? When I first installed the BootCamp drivers, it seemed to work, but there were a few updates afterwards, and it seems that I lost whatever had stabilized the issue.
Thanks!

There was someone complaining about using two VGA monitors on 2010 w/ ATI 5770.
There is an improved dual display support now in Windows 8. Windows 7 was always "where is my screen" on startup. The video port close to the motherboard seems to be A or primary that it looks for on startup.
I have 23" ACD (2006 unit) Mac Pro but always used GTX, no ATI card (well recently I was using Windows only and an ATI 6790 or something).
And of course you must have installed ATI (Windows own drivers are iffy or "okay" but not the best.
Apple drivers for Windows (aka "Boot Camp" 3.x or Lion's 4.01) include driver support for the ACD.
You say MDP and 4870 in profile, but I didn't think Apple's 4870 had one, and flashed PC cards always have trouble (unflashed 4870 would of course work as normal as can under Windows).
Rollback update of driver is one step. Run Driver Sweeper 3.2 and CCleaner (and clean the registry) to get the graphic driver installed and 'clean.'
Patch Tuesday can always affect a few systems and a problem but more likely a conflict with something else.
One at a time see if you can get new graphic driver to help.
Wtih the 5770 Apple tech note does mention not using adapters.
And don't allow Windows to provide gpu driver if it asks

Apple Cinema Display with DVI to VGA graphic adapter... HELP

A friend of mine has a PC (Windows XP based) and is using the Apple Cinema Display. Since his graphic card has both vga and dvi slot, he can plug the monitor to DVI and got it working, but when he tried to plug it into the VGA slot using DVI to VGA converter, it did not work. Is there a need of special converter or adapter?

Hi royz86,
To run a DVI display off a VGA output, you need a rather expensive converter box. These converters vary in performance, reliablility and application possibilities and certainly don't compare with using a native DVI output.
Your friend was probably trying to use a DVI to VGA adaptor (which won't work "the other way around"). It works by grabbing the analogue signal that is included in a DVI-I output and setting up a VGA output that way. These don't work with DVI-D outputs, by the way.
Cheers!
Karl

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Using the Macbook with new LED Apple Cinema Display? Not a beginner's Q...

Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed.
I just got a 24" Apple LED Cinema Display and am using it with my 13" Aluminum Unibody Macbook. What I do is dock the Macbook (with closed screen) when at home with the big display and just use that. I enlarge program windows and arrange the layout (in different spaces) to take advantage of the large screen and resolution. So far so good.
But I'm a student and take my macbook with me to class. When I open it up, all the program windows are set as they were on the larger screen, which means some are out of view or simply not well-adjusted for the smaller and lower resolution of the Macbook. I manually adjust these and work on the Macbook that way.
But when I return home in the evening, I have to adjust them again once I 'dock' the Macbook. Kind of a pain if I'm doing this twice a day.
What I'd like to know is: is there a setting or group of settings that would do this automatically for me? A program? An AppleScript? Surely someone out there has had the same issues and has found a fix, if such a thing exists. Or is it just a fact of nature one deals with when working on two screens?
To preclude one response: yes, I know I can mirror the displays when I open the Macbook along with the LED Cinema Display. But this simply mirrors them using the lower resolution and dimensions of the Macbook screen. And that kind of negates having the larger, Cinema Display.
So - any thoughts? Solutions? How do you guys manage with this?
Thanks,
Jeff

I don't really have a solution for you but wanted to link you to a discussion on this very topic that took place last month on MacInTouch.
http://www.macintouch.com/readerreports/helpplease/topic3939.html#d24sep2009
The conclusion seemed to be that it is not an OS issue, it's an application issue. There really was no good answer but some good insight into why the problem exists and why it may not be something Apple can fix.

On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

FCP7 2 apple cinema displays & 1 sony HDTV issues

Hello, I am having issues with connecting my 3rd montior which is a SONY HDTV. I am able to connect all 3 montiors and they all work fine as far as the workspace goes, but one thing I was used to when editing using a SONY DSR-11 was having the 3rd montior, in this case the Sony monitor, as the video ouput monitor, you know, to be able to see what I was editing rather than what I do now wich is drag the canvas window to the SONY monitor and enlarging it. It's kind of annoying to be honest. Anyway, anyone out there experience the same issue? I have an ATI Readeon 5770 card which has the two mini dislay ports for the 2 apple cinema displays and the DVI to HDMI port on the card. Also, I am able to view the cut on one of the apple cinema displays (i don't want this as i want it on the SONY display) when i hit view>external video>all frames and then for video playback the only options I getr is the apple displays AND its the wrong aspect ratio when i play it but when i pause, it goes back to the aspect ratio i shot it in. ANY help would be greatly appreciated!

Turn OFF [√] Mirror Displays
Then you get something like this:
The screens are connected along an edge of your choosing to make one large "Extended desktop". For your sanity, you arrange then in the same way (by dragging the blue boxes that represnt each display) to the same order they are in on your bench.
The mouse moves freely across the divide between screens, and it can carry a window with it. The little white bar is the menuBar, and it can be moved as well.
If you move a window onto another screen, it can be re-sized to fill almost the entire screen. If you split a window across displays, it scrolls and updates "the right way".

Apple Cinema Display 23" brightness issue while using with Microsoft Vista

Hello there,
I have the following issue and was wondering if someone has an idea what the reason is or what can I do to fix this:
I have a 23" Apple Cinema Display running with a MacPro 2,8 GHz. When I switch to PC using BootCamp 2.1 with Windows Vista Service Pack 1 32bit the screen becomes extremely dark.
At first, on the PC side, the display has the correct brightness but after two seconds it switches to a very low brightness setting.
When I go back to the Mac side the brightness setting on my Cinema Display has changed to the lowest point.
I also have a MacBookPro, with Microsoft XP installed also using BootCamp (I cannot find the version of this Boot Camp, but it is an earlier version) to change to PC. In XP, there is a driver installed that allows me to use a slider on the PC to control the monitor brightness. But with Vista this slider is nonexistent.
I already tried changing the graphic's card NVIDIA 8800 driver to see if I can manipulate the brightness on the monitor. I realized there is brigthness slider on the Nvidia driver, but when you make brighter, the colors just get messed up, and the brightness stays as dark as before.
We have lately upgraded to Snow Leopard and had installed Spyder on the Mac side to create a monitor profile for the Cinema Display. I already deleted the profile to see if there is a change. Nothing. I already went back in time on my PC (Restore Point), also nothing.
Could I download a driver for Vista, so that I have a brightness slider on the PC side, so that I can adequately change the brightness to its correct setting.
It is amazing how the lack of correct brightness in a monitor, can ruin your entire working day! Very frustrating!
It would be greatly appreciated if someone has a solution for this issue! Thanks a lot!
Emil

Okay, I came across a thread that implies there is a problem with using the Apple ADC-to-DVI adapter to attach the older "acrylic" 23" Cinema Display to a Mac Pro DVI graphics card. Basically, the workaround is to NOT use the USB part of the adapter (disconnect it).
1) In OS X, set the desired display brightness.
2) Disconnect the USB cable coming from the converter to the Mac.
3) Restart into Windows.
The brightness setting should now remain as it was under OS X.
Confirmed to work on my Mac Pro v1,1 (dual 2.66 Core 2 Duo) with nVidia GeForce 7300 GT video card running Windows 7 x64.
Link here: <http://forums.macrumors.com/showthread.php?t=790910> for credit to resolution.
Of course, you lose the functionality of the 2-port built-in USB hub in the Cinema Display, but an external USB hub can make up for that.

What adapter and or software do I need to allow my lenovo laptop to be able to use my 20"apple cinema display

what adapter and or software do I need to allow my lenovo laptop to be able to use my 20"apple cinema display?

To start off with, you will need to download iTunes. Make sure that you download the correct version, Windows, and if you have 32-bit or 64-bit. Pictures taken with the iPhone are imported to the computer via Scanner and Camera Wizard in Windows, or can also be copied via Windows Explorer in Computer. Photos are then synced to the computer via iTunes by selecting a folder on the computer that contains photos and they are copied to the computer.
Calendar has to be handled by a supported application. That can be Outlook 2003 or 2007. Other choices include using Google calendar, MobileMe,etc. The latter allow for OTA syncing of calendar. Contacts require a supported application as well, those include Outlook 2003 or 2007, or Windows Address book in Vista, or Windows Mail in Windows 7. You also have the option as above for Google or MobileMe.
Information about what you might want to use is found on the Apple website and descibes the supported applications.

I cannot calibrate my Apple Cinema Display without getting an error message. I've done it many times before.

I have a 23" Apple Cinema Display and a MacPro running Snow Leopard. Using the built in calibration system I have calibrated the display several times in the past, but now I get an error message: The new calibrated display profile could not be created or set to be the current profile for this display." I have no applications open when I do the calibrating.

Launch the Terminal application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
ls -Odel Library/ColorSync/Profiles
Post any lines of output that appear below what you entered – the text, please, not a screenshot.

Apple Cinema Display

HI. I have a question. I am replacing (finally) a MAC G5 PPC with a MAC Intel (tower). I have 2 Apple Cinema Displays - a 20 inch and a 23 inch. When I migrated everything from the PPC to the INTEL, I hooked up one monito to each cmputer. Good. All fine and dandy. Now, I shut everything down and I want to connet both Apple Cinema Displays to the new Intel. However... the new Intel has DVI pots and only one PIN port. Ok..so I went and bought a MINIDisplay to DVI adapter. Now.. here's the problem:
When I pug in both displays, the bigger 23 inch stays dark (although the power is on)...but it takes OVER as a primary display! Which annoys me because now I cannot see my desktop...only that is in he secondsary monitor... So I went to System Preferences and tried the DETECT DISPLAYS.... it only shows one. However when I go to GATHER WINDOWS.. I see TWO blue icons that symblize displays. My bigger display..still dark. I tried resetting the PRAM...nothing.
I'm wondering if all of a sudden my biggers display gave out? I mean..it was just eralier today that it was working. Oh...and one more thing: if I do not use the 20 inch and plug in ONLY the 24 inch... still dark.
Help. (my mac is Intel Tower running on Mac OS 10.7
Many thanks in advance.
PS I now see two window displyas when I say DETECT WINDOWS One is 1920x1200 (which I assume is the 23 inch) and the other is 1680x1080 (which I assume is the 20 inch). So I would think that the system preferences can detect these two monitors, but why is my 4 inch black??? Did it fry>

Solved it. I am an idiot. It was the power unit. They look the same so I hooked up the 20 inch to the 24 and viceversa. I'm an idiot :-)

23" Apple Cinema Display will not turn back on

For some reason this morning I thought I'd help the world and turned off my ACD. I'm back at the officce now and cannot turn it back on. It's been on since I bought it (yes, it goes into sleep mode when not in use) in December. In either case, is there a special trick to turning this thing back on? I tried the plug-unplug thing, I turned off and on my PC (I also use it for my g4 powerbook) to which it was connected at the time as well - nothing. Any thoughts out there?
Thanks in advance for any help,
PC Box Windows XP 23" Apple Cinema Display, also a 12" G4 Powerbook

I am having the same issue right now. Except it has happened with my 2 monitors on my dual monitor G5 Quad set-up. Both monitors are down. I tried a different monitor in the same computer and it works fine. So I think it must be a monitor related issue.
Although, I wonder if it possible that the computer has somehow put both monitors into a "deep sleep" mode? Is there such a thing. I tried a PRAM reset that didn't help, so I'm not sure if this is the case.
Next up is to figure out some way to test the power on the 2 power adapters/transformers without electocuting myself. I have a suspicion at this point that a power surge may have killed them?
Let me know if anyone has similar scenario, and if a solution was found.

Cinema Display on Windows XP 64bits

Hello,
Im trying definitely to use the controls to turn of and on the cinema display under Windows XP x64, the excelent drivers WinACD for windows 32bits doesnt work on windows xp 64bits edition.
http://sourceforge.net/projects/winacd
I read some people did the work to make it happend, but they never make it public for the rest of us to use this modified dirvers.
I heard about one way to do it, we need te .INF file of the WinACD drivers unzipping the .MSI instalator of the drivers, them some one says, that we have to modify the way he says
If you unzip the WinACD msi file, one of the files is actually the display INF file. Edit that and change:
[Manufacturer]
%APPLE%=APPLE_MON
[APPLE_MON]
to:
[Manufacturer]
%APPLE%=APPLE_MON,NTamd64
[APPLE_MON.NTamd64]
Save it, and tell WinXP 64 to use that file for the driver of your “pluag-and-play” monitor.
But i dont get the .INF file, can some one, help me, can some one give me a solution, any thing, if you can extract the .INF file and upload it to me for me to modify it, i be glad, or some one can share a complete solution for this, because we are a lot of people that needs Windows Xp 64 Bits to render and make CAD that is no compatible with windows Vista and have Cinema Display.
Im gettin mad, please help me if you can, them i will share the solution uploading it to SourceForge.net
Thanks

I actually just reinstalled the drivers, but this time from a new export onto usb. The display works fine now. I think it just didn't put all of the drivers on the first time I installed the apple stuff.
Try taking all of your drivers off and then reinstalling.
Not sure if this really helps.

Apple Cinema Display on Windows 7

Similar Messages

Maybe you are looking for