Apple Cinema Display

HI. I have a question. I am replacing (finally) a MAC G5 PPC with a MAC Intel (tower). I have 2 Apple Cinema Displays - a 20 inch and a 23 inch. When I migrated everything from the PPC to the INTEL, I hooked up one monito to each cmputer. Good. All fine and dandy. Now, I shut everything down and I want to connet both Apple Cinema Displays to the new Intel. However... the new Intel has DVI pots and only one PIN port. Ok..so I went and bought a MINIDisplay to DVI adapter. Now.. here's the problem:
When I pug in both displays, the bigger 23 inch stays dark (although the power is on)...but it takes OVER as a primary display! Which annoys me because now I cannot see my desktop...only that is in he secondsary monitor... So I went to System Preferences and tried the DETECT DISPLAYS.... it only shows one. However when I go to GATHER WINDOWS.. I see TWO blue icons that symblize displays. My bigger display..still dark. I tried resetting the PRAM...nothing.
I'm wondering if all of a sudden my biggers display gave out? I mean..it was just eralier today that it was working. Oh...and one more thing: if I do not use the 20 inch and plug in ONLY the 24 inch... still dark.
Help. (my mac is Intel Tower running on Mac OS 10.7
Many thanks in advance.
PS I now see two window displyas when I say DETECT WINDOWS One is 1920x1200 (which I assume is the 23 inch) and the other is 1680x1080 (which I assume is the 20 inch). So I would think that the system preferences can detect these two monitors, but why is my 4 inch black??? Did it fry>

Solved it. I am an idiot. It was the power unit. They look the same so I hooked up the 20 inch to the 24 and viceversa. I'm an idiot :-)

Similar Messages

How do I attach my iSight camera to my Apple Cinema Display?

I've just bought two iSight cameras, and found nothing in the accessory kit with them that would allow me to attach the camera to my Apple Cinema Display. This is because the back of the Cinema Display is beveled rather than flat, so the flat base of the accessories won't set firmly.
Does anybody have a solution for this?

Robert,
Isn't it it nice to have your issues solved.!!
I was wondering if you would help us out, & mark you posts so that this message on top of your threads are gone:
"This question is "Helpful" answers available: 2. "Solved" answers available: 1"
Thought this might be appropriate reading, regarding those Helping You to Solve Your issues.
Answers, Helpful and Solved
Marking simply as Answered does not award points.
You are the Original poster and only you can do this.
Thanks, for your Time and effort !!
Eme

Can I use an Apple Cinema Display as a second monitor for my iMac?

I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?

Just had a good look inside my box and nothing. Maybe it's a Apple UK thing
The back of my iMac does have a Mini DVI port so I'm gonna pop down the Apple store tomorrow morning to pick one up.
Thanks for the advice, I'll let you know if I'm successful.
Message was edited by: genpro

How to connect a apple cinema display to an imac

I have a brand new 27 inch iMac. I also own a 30 inch Apple Cinema Display. What peripheral adaptor do I need to connect the display to my new iMac?

Hello,
Thunderbolt/Mini DisplayPort-> Dual Link DVi cable...
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
- Anonymous
http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115

Can I use a 30" Apple Cinema display with a new 27" iMac?

I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA. I will soon be upgrading it to Mavericks, if that makes a difference. My understanding is that the resolution on it is 2560 x 1440.
I'm looking at buying a used 30" Apple Cinema display. I'd like to use it with my new iMac. The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great. I just want a larger screen.
I called Apple support, and the tech rep wasn't sure it would work. He seemed to think that the 30" Cinema displays were made with different connections. Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
Can anyone tell me if this would work? Would my new iMac and its video card support the 30" Cinema display? Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)? Any advice is appreciated.
I don't yet know many of the specifics of the 30" Cinema display I'm considering. I know it is about 3 years old. And here is a picture of the back of it:

Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
Regards.

What do I need to connect my apple cinema display to new macbook pro

what do I need to connect my apple cinema display to new macbook pro?

2011 macbook pro with TB -> apple 27" Cinima Display with mini-displayport
Does this work natively? Is there an adapter or workaround?
No, not until or if an adaptor becomes available. See this thread.
Apple display and Thunderbolt compatibility

How to connect 22" Apple Cinema Display with ADC to Mini DisplayPort?

What are my chances to connect a 22" Apple Cinema Display with ADC connection to my new MacBook Pro with its Mini DisplayPort? Is there a combo possible of some adapter with some cable for instance?

You need a Mini DisplayPort to DVI adapter
<http://store.apple.com/be-fr/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTEwMjYzNzQ>
followed by a DVI to ADC adapter
<http://store.apple.com/be-fr/product/M8661Z/B?fnode=MTY1NDA5OQ&mco=MTE0ODUyODQ& s=topSellers>

How to connect old Apple Cinema Display to new Mac Mini?

Hello,
I'm considering replacing an old Mac Mini with the new model, but I intend to keep on using my old Apple Cinema Display 20" with it. But i'm having some trouble finding the right conversor (it seems there isn't any from Apple...)
Any suggestions?
Thank you.

If by "old" apple cinema the OP is referring to the aluminum displays of the later mac models, then yes, that's a no-brainer, the problem is that if the OP is referring to the "real" old apple cinema displays, which have a DVI-type connection with power included on the same cable, like the displays the former Mac G4 or G5 had, then he needs a ADP to DVI port, which in most cases it cost more than the actual monitor itself.. I guess the OP needs to specify what does it mean by old apple displays or throw in a link to an image..

How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

Dear Mac users
thanks in advance for your help.
I currently own:
• Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
• Mac Pro
• Apple Cinema Display 23’
What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
+ others on the net and have (hopefully) understood that:
a) from Vga to Dvi I need a converter such as Geffen’s or similar
b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
Now, my questions are:
a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
e) And how about the DVI switch? Any will work? Any particular suggestion?
Thank you very much for your help.
If you have any other suggestion, please let me know.
Regards,
Emil

Noone to help me?
No ideas?
Thanks,
Emil

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Connecting a keyboard to Apple Cinema Display with MBA

Hi,
I have a mid 2013 MacBook Air, (OSX 10.9.2). My Apple Cinema Display is the older 23" (got it in 2008) and I have connected my MacBook Air to the display through my mini display port DVI adapter and it works great.
My question is --- I want to now connect a keyboard --- does a wireless keyboard or mouse work? My Cinema display only has a USB 2.0 and FW ports.
Thanks alot.

Yes. Wireless mice or keyboards connect to the computer via Bluetooth. The display type doesn't matter.

Apple Cinema Display with DVI to VGA graphic adapter... HELP

A friend of mine has a PC (Windows XP based) and is using the Apple Cinema Display. Since his graphic card has both vga and dvi slot, he can plug the monitor to DVI and got it working, but when he tried to plug it into the VGA slot using DVI to VGA converter, it did not work. Is there a need of special converter or adapter?

Hi royz86,
To run a DVI display off a VGA output, you need a rather expensive converter box. These converters vary in performance, reliablility and application possibilities and certainly don't compare with using a native DVI output.
Your friend was probably trying to use a DVI to VGA adaptor (which won't work "the other way around"). It works by grabbing the analogue signal that is included in a DVI-I output and setting up a VGA output that way. These don't work with DVI-D outputs, by the way.
Cheers!
Karl

Apple Cinema Display (20-inch DVI 2005) not working after 10.10.3 update

I have an Apple Cinema Display (20-inch DVI 2005) that isn't working after installing the 10.10.3 update. The screen is just blank, and the power light just blinks a few times every 30 seconds or so. I use this as a second monitor with my iMac (27-inch, Late 2012). Any way to fix this? Thanks!

Thank you for the update!
Next I would recommend the Reset the System section of the following article for additional troubleshooting:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
I would reset the SMC and the PRAM together, in that order one more time, then do the Safe Boot if needed.

New Mac Mini and Apple Cinema Display

I have just upgraded my Mac (G5 PowerMac) to a new Mac Mini. I am still using my Apple Cinema display - but I cannot not play all the purchased movies that I have on iTunes now...????

Greg,
Are these movies HD? If they are, you might be having a problem with HDCP which is copy protection that won't let you view movies if all of your equipment is not HDCP compliant, which probably is your Cinema display. I also have a late 2012 Mac mini with an older Apple 20" Cinema display and cannot watch HD itunes movies. You will have to watch in standard definition. Of course you might have a different problem, but your question seemed similar with my situation. What is strange is that you were able to watch from your G5 Powermac. Maybe the power PC chip allowed viewing as opposed to intel chips, which I think intel created HDCP. Somebody on these boards probably has better answers then me ;-)
Rob

Macbook Air + 30" Apple Cinema Display + Powered USB hub

I just received my dual link DVI to mini display port adapter in the mail today, and so far it's working just fine connecting my newer generation Macbook Air to the older 30" Apple Cinema display (the Air is closed, with an Apple wireless mouse/keyboard connected via Bluetooth).
I'm wondering if anyone has any success connecting a powered USB hub to either the adapter itself or the 30" display in order to gain some USB functionality out of the Air? I have a powered 4 port D-Link hub which worked fine directly into the Air, but I can't seem to power any devices when it's hooked up to the 30" display or directly into the adapter. I can't even get devices (external powered hard drives, Mbox) to work when plugged into the screen directly (no hub).
I called AppleCare about the problem and they said they don't support USB hubs via the 30" Apple Cinema Display when connected to the Macbook Air, but if anyone has any experience with this situation or if someone could offer me advice to get USB functionality out of my MBA + 30" ACD, it would be greatly appreciated!

Welcome to the Apple community.
Unfortunately not.

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Apple Cinema Display

Similar Messages

Maybe you are looking for