Apple configurator and ios 6.1 cannot install config profile

I'm using the Apple Configurator v1.2.1 to install my enterprise app into iPad 2's. First of all, I am unable to upgrade from iOS 6.0.1 to 6.1.2. It either fails or gets stuck and I have to "stop". My work around is to upgrade via the device (which is actually pretty fast). My big problem is that I am also installing provisioning and configuration profiles, which include files for the app. Every things seems to go ok, the app and all the data installs properly, so does the profisioning profile, until the end where the configurator tells me to "tap device to install profile" but the profile prompt never appears on the iPad. The iPad goes into setup as if it's a new iPad and the config profile nevers gets installed. I do get a warning saying it can't install the profile. I'm forced to update the configuration manually. I'm updating about a dozen each time, so it's starting to get tedious as well as error-prone. Any ideas would be greatly appreciated.

Use whatever method you wish to update iOS
Go though,the setup as needed
Then try apple Configurator to install your profiles
From memory updating iOS with apple Configurator
Causes the setup to run like a new device the same if you used iTunes to update
As the complete OS is installed
However it will only download iOS once, providing all your devices are the same
Updating iOS on the device still has a setup but it's only for iCloud
And you'd have to download the (smaller) update each time
I would think it is the iOS update and setup that's causing your profiles etc
to fail there maybe to much going on at the same time

Similar Messages

Xcode 5.1 and iOS 7.1 - cannot install app on a specific 5S

This is the most bizarre issue I've ever seen. I have Xcode 5.1 and iOS 7.1 on a iPhone 5S, iOS 7.1 on a iPad Retina and iOS 6.something on an iPhone 4S.
My app builds and installs on the 4S no problem. It builds and installs on the iPad no problem. On my iPhone 5S it crashes and burns on build with tons of warnings and erros. What can possibly cause this? This makes no sense. Previous versions of this app installed to this phone no problem. Those previous versions also no longer install. Test "Hellow World" apps also fail.
Same exact app runs without issue on the other two devices.
Here is the result of a simple "Hello World" test app that runs fine on the other two devices (and the simulator) but crashes and burns on this 5S only.

Xcode now enforces previousl hidden warnings.
You didn't show enough of the Linker errors but I'm pretty sure I know what is wrong as this same thing happened to me.
It looks intimidating but those warnings are easily corrected.
You have a third party library that is not 64-bit.
Rebuild your project but change the build setting as show here:
You need to change one thing: ARCHS_STANDARD to ARCHS_STANDARD-32_BIT.
This creates a 32 bit app which will run fine on iOS 7.

Apple configurator and ios 6

I have updated my ipods to iOS6 using Apple Configurator. Now it won't put any apps back on the device. They are supervised, but it wiped everything clean with the update. How can I get it to take the profile and apps after the update? All the ipods now act like a brand new device and don't have any profiles on them. Even when I hit refresh in apple configurator it just says Device running newest software.

You might want to try posting in the following two forums:
- iPad in the Enterprise
- iPhone in the Enterprise
Since Enterprises use the iPhone Configuration Utility.

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.tried both primary and backup emails. says both already in use

randers4, thank you for the suggestions.
1) I have contacted Verizon and they are not blocking "premium" or 3rd party text messages.
2) The Apple ID login issue occurs regardless of wi-fi network location, or even if I am not on wi-fi at all. Router settings are irrelevant to this problem.
3) I have already played around extensively with date and time settings. This did not fix any issues.
Any other suggestions? I had another call with Apple support and they are of the opinion that I may need to have the phone totally replaced, which is unacceptable unless it is free of charge.

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

Apple Mail and IOS mail client's auto configuration

Good morning,
Does any kind of documentation exist, anywhere, of how Apple Mail and IOS does autodiscover (how they handle it) and which XML format does it require for non Exchange accounts to be autoconfigured (an IMAP account with SSL and SMTP SSL too?.
Best regards,

Good morning Eric,
Thank you so much for your answer. Básically the answer I'm trying to get is how to manage for autoconfigure Apple Mail and iOS Mail automatically with a not "so known" email provider such us Hotmail, Yahoo, Gmail, like can be Sarenet (www.sarenet.es). I mean which kind of info should an XML or DNS SRV record contain in order to achieve this goal?. My answer requirement is far more specific that yours. Anyway thanks a lot as said before .
Regards,

Apple Configurator and Mass Device Set-up

I’m having some issues with iPads using the Apple Configurator and a Bretford Cart. I submitted this to my lovely Apple account team, however they have not acknowledged or replied to me. I could really use some help with this one!! PLEASE
I have a deployment of about 1000 iPads. The initial deployment is over but we collect them and redeploy them.
Here is what I do with the cart.
Load iPads in to it.
Update to the latest iOS (if approved internally).
Restore a backup of an iPad configured with customized wallpaper.
Install a profile that contains a webclip to our MDM install.
The devices ARE not supervised, nor do I want to supervise them in any way. We have an MDM and do not need or want device supervision.
This used to work for me with minor issues.
Now I’m having some problems.
In particular:
On some devices, I no longer get the choice to select “Next” at choose a Network connection. Sometimes I get it and it allows me to go to choose “Continue without Wifi” and I’m good to go. Sometimes I don’t have this choice and that is an issue. Why is this happening? (Incidentally, when I erase all content and settings of a device that HAS allowed me to choose Next and Continue without Wifi, when it is restored, the option is no longer there.)
After the update and backup is restored, I have to go through the Hello and Welcome screens before I can install a profile. Why?
When I install profiles, it allows me to only install 1 profile at a time. This does not work for me. Why did this change in Apple Configurator?
What used to be a fairly simple process is now becoming kind of a pain. I’ve searched Apple forums and it seems others are having the same issues. Are you able to help or give advice on a better way to do this?
I have about 1000 iPads deployed and need to find the smoothest way to go about doing this.
Thank you for any help or advice.

Yes, an MDM is your best bet. If you aren't currently using an MDM and want to try one out, there is a free MDM solution by Meraki called Systems Manager. http://www.meraki.com/products/systems-manager/ . They have a location feature that might help you. The MDM can also allow you to lock the screen or do a remote wipe to keep the thief from accessing the data on the iPad.
You can also have your users sign up with the Find My iPad app http://www.apple.com/ipad/find-my-ipad.html to help locate a stolen iPad.
As ryanm512 said, if you Supervise your iPads in Apple Configurator the iPads can only be unsupervised using the computer that Supervised them.
However, everything is out the window if the thief resets the iPad when its not connected to a network. Once wiped clean, the MDM and Find My iPad won't work.
Here are some links I found on another post that may be helpful:
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Hope this helps!
~Joe

Apple Configurator custom iOS version option

As of last week, Apple Configurator custom iOS version option seems to be failing out.Previously we were able to install or upgrade to iOS 8.1.3 instead of iOS 8.2 until we have tested applications to confirm they are working on the latest iOS version. When using the custom iOS version, it fails out during the iOS install issue.
It also appears the iTunes will no longer let a device be restored to the 8.1.3 ipsw either.
Has anyone else experienced this issue?

Dear HyperNova,
Firstly I thank you for your prompt reply to my question. However I do object to your response that you "seriously doubt anyone from Apple would tell me that" - are you seriously questioning my integrity that I would post that if not true! It is no wonder that people shy away from posting on forums when they get that sort of response.
I was advised by the support person I spoke to that it was intended for developer previews but that I could try it for earlier versions of iOS. It may not be a "supported' feature - but I WAS advised by Apple support that I could do this and it worked.

Apple Configurator and MDM

Have 25 ipads to setup in a college environment with apps to be installed of course.
Am I right to assume that if using apple configurator on a mac to do the initial setup, create backup and restore to other ipads that if supervised is used, only that mac can be used to make changes ?
Also, we are implementing the web-based Mobile Deployment Solution called Meraki whereby apps can be pushed out by this.
If using apple configurator to do the initial setup, will this affect Meraki MDM in anyway ? i.e. removing or adding apps or anything else ?
I have to update the IOS on ipads to latest version. I've been told that I need to use Apple Configurator for the intial setup and then college can push apps via Meraki. I have never done this before, but been reading up and have read about push certificates and VPP. However, another question I would like to ask is, if I don't setup the VPP on the mac, can it still be done via MDM and do apps need to be downloaded onto the mac. All very vague. If using apple configurator and then selecting to install apps, can these just be downloaded from the app store instead of itunes. I'm trying to think of the best way to go about this, or whether to just update IOS on each ipad and then push apps via MDM, or install apps via apple configurator and restore to all ipads via a backup. Confusing !

"This document offers guidance on some important considerations for getting the most out of your iOS deployment." Covers: Prepare your infrastructure. Set up devices. Configure and manage devices. Deploy apps and content. Plan for support.
http://images.apple.com/iphone/business/docs/iOS_Enteprise_Deployment_Overview_E N_Feb14.pdf
Quick overview of zero-touch MDM enrollment
http://www.apple.com/education/it/dep/
Use VPP. Select an MDM. Read the Google doc below and nsdjoey write up.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
    http://www.apple.com/education/ipad/resources/
    scroll down after all the pretty picture. Click on the words "For It".
    business site is:
    http://www.apple.com/lae/ipad/business/#browse-it-resources
    If necessary, scroll down until you see the Browse IT Resources button. Click on button.
Joe Rowe's Excellent guides
IT managers who are new to configurator and managing a cart of ios devices:
      https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
         [ original announcement -- https://discussions.apple.com/thread/4256735?tstart=0 ]
Quick help presentation for students:
     https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0
See nsdjoey writeup. See third post.
https://discussions.apple.com/message/22286109#22286109
Institutions in the USA and other countries can use the App Store Volume Purchase Program (VPP) to buy Apps.
https://support.assistiveware.com/index.php?pg=kb.page&id=54
"Deploying a great quantity of iOS devices means creating a great quantity of Apple IDs. This script allows automated Apple ID creation from a spreadsheet."
http://www.enterpriseios.com/wiki/Apple_ID_Automation_Builder

I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I now find the supervised ipads do not allow the pupils to download photos or movies etc. Any suggestions would be great please.

I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I did this initially as our school internet connection was stopping us from being able to update the IOS and our County was offering a managed system, Lightspeed, which took control of every device in school which proved very expensive. I now find the supervised ipads do not allow the pupils to download photos or movies etc. As we frequently use the ipads as cameras this is causing us a problem. We have a school imac that I use to keep the devices updated with Apple Configurator (not connected to our network), and this doesn't seem to offer any solution to download them either. I was told there was a setting in Apple Configurator to allow other computers to download from supervised devices, but I can't see it anywhere. I am very new to this so any advice or help would be greatly appreciated please.

I assume you are wanting to take the photos and movies off the iPads?
Connect the iPad to a Apple computer. Open "Image Capture". Any photos or video can me imported to the desktop or other location on your computer.
I had this same problem last year and as we have no wifi I asked lots of people at Apple what I could do - no one provided this answer (a little unbelievable!). If you have wifi using something like dropbox would be an easier solution.
Hope this helps

After upgrading iphone 5 to iOS 7, I cannot install new apps

After upgrading iphone 5 to iOS 7, I cannot install new apps. I get the message that I must first read and agree to iTunes terms and conditions. I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1. I can update existing apps ok, though.
Anyone have this problem and find solution?

Delete & ReInstall the App Store...

170 iPads, Apple Configurator and Apple ID - HELP!

Hey Guys,
so i work for a school and i have 170 iPads that need to be deployed. we are using apple configurator and supervising the devices.
Everything has gone great for 23 that i have already done and handed out to teachers etc, except for the minor problem of updating the applications.
When they go to the update the apps it asks for an apple ID and passowrd, at this point in time its asking for my Boss' Apple ID password. Is there anyway of stopping this or will i have to get the teachers to input there own apple IDs on startup of the device?
Thanks for all your help.

This happens more often then not lately and I am not sure why. But this is what you can do to fix it after it happens.
Do you have tens - or even thousands- of apps trying to download? You
need the account’s “queue” deleted by Apple.
1.       Navigate to: http://www.apple.com/support/itunes/contact/
2.      Click on "Contact iTunes Store support"
3.      Choose "Connecting and Downloading"
4.     Select "The topic is not listed" and enter the subject "Download
Queue" and continue.
5.      On the next page choose to email support.
6.     Create a message that says something such as:
"I redeemed codes using Apple ID [email protected] & iTunes is
trying to download hundreds of copies of the same app. Please clear out
my download queue."
7.      Wait for a response from Apple.
8.     ****After the queue is deleted, be sure to delete the computer’s
trash. All the extra app copies will fill the MacBook Air’s storage.****

I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

HT5188 Apple Configurator and Apple ID

I recently downloaded Apple Configurator and upon setup, I entered an apple ID. Now I was told that was the incorrect Apple ID for the VPP. How do I change the apple ID In Configurator?

Unfortunately, the menu option that was available in earlier versions of Apple Configurator is no longer available But here's how I've been doing it using the latest Apple Configurator 1.1.2.
First, go into iTunes and authorize with an Apple ID (iTunes -> Store -> Authroize this computer). It doesn't have to be a VPP Apple ID…just an ordinary Apple ID used to associate with the app. Then download the app(s). They will go to ~/Music/iTunes/Mobile Applications. These apps will be linked to the Apple ID you authorized in iTunes. Next go into Apple Configurator and add the apps on the Prepare -> Apps screen. When you try to add the app in AC (clicking on the "+" at the bottom of the screen), you should be prompted to enter an Apple ID and password (see screenshot below).
It will say that "This Apple ID will be used to redeem VPP codes…" It is NOT the Apple ID used to purchase the VPP codes… The VPP codes can be redeemed by any Apple ID.
You must enter the same Apple ID and password that you used to download the app in iTunes, and you should be good to go.
Hope this helps!!
~Joe

Apple configurator and App not authorized

Today was my first day putting paid apps in. I have 4 different paid apps, and 3 codes through VPP for each of the apps.
> The first one I did went fine. All three iPads have all have that app. Now, the last 3 apps only went onto 2 of the 3 iPads. It is telling me with a little yellow triangle "App not authorized." When I click on the number and open the screen where you import the spread sheet with codes I see this "This code has already been used. Each code may only be used once." However it is not linked to a device like the other three.
> Have you run into this? Any suggestions on what I should do?

+1 for what bcpoole said. Redownload the spreadsheet and reimport into Configurator.
Also you need to be sure to authorize iTunes on the sync computer with the same Apple ID that you are using in Configurator. Here's how I've been doing it using Apple Configurator 1.1.2.
First, go into iTunes and authorize with an Apple ID (Store -> Authroize this computer). Download the app(s). They will go to ~/Music/iTunes/Mobile Applications. Then go into Apple Configurator and add the apps on the Prepare -> Apps screen. When you try to add the app in AC (clicking on the "+" at the bottom of the screen), you should be prompted to enter an Apple ID and password. Use the same Apple ID and password that you used to download the app in iTunes.
Hope this helps!!
~Joe

Apple configurator and ios 6.1 cannot install config profile

Similar Messages

Maybe you are looking for