Apple Configurator error code 2003 MCCAndMNCs is invalid

Hi,
I have updated my MBP to OS X 10.10 (Yosemite) and installed the latest Apple Configurator (AC) 1.7.1.
I have an existing Profile that includes one (1) payload: Wi-Fi. This profile is used for Passpoint (HS2.0).
In the previous version of AC (1.6 I think), the profile I created worked (iPhone 5S with iOS 7 installed, AC on OS X Mavericks).
Here are the most important fields from the Payload:
Security Type is: WPA2 Enterprise
EAP type field is: EAP-AKA
MCC/MNCs field is: MCC=505, MNC=1 (I can't input 01 into this field, and the MNC is meant to be 2 digits, but the AC just replaces it with 1)
When I try to re-install this Wi-Fi Profile on an iOS8, the AC complains with the following error:
Has anyone seen this error before?
Where can I get a list of error codes that the Apple Configurator (1.7) uses?
Are there any workarounds available?
Thanks,
Al

This is the console output:
"19/11/2014 10:48:04.069 pm Apple Configurator[6524]: ERROR - 1297519ms <ACUProfileInstallOperation: 0x600000189240 { UDID = 2991a2d4d7844f7c8f2b2cd3e3c69ad1a5c7dd22 }> finished in 0.14 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile ‟Telstra ENIW HS”" UserInfo=0x608001274ac0 {NSLocalizedDescription=Unable to install profile ‟Telstra ENIW HS”, NSUnderlyingError=0x600001a54640 "The profile “Telstra ENIW HS” is invalid."} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-550/Engine/Op erations/ACUOperation.m:151)"
//Al

Similar Messages

I am unable to restore my iPhone 3 to factory orginal. I keep getting error code 2003

I had jail broken my iPhone 3 a number of years ago for travel use.
I now wish to return it to factory original so that I can have it correctly unlocked to take to Europe for use when traveling.
But when I try to do a restore to factory it keeps displaying the error code 2003 and I cannot locate what that means.
I tech's at my local Apple store have tried as well with the same result.
They were also not able to provide me with any explanation as to what the error code meant.
Does anyone out there know what it means or how I may be able to resolve this issue?
Thanks

That message covers several things. Most often it is a cable problem, switching to another cable (Apple certified) often fixes it.
Second it can be security software on your computer interfering, temporarily disable all of them and try again.
There is a third jailbreak related issue, you could be attempting to contact a site other than Apple. Try it on a different computer where a jailbroken device has never been used. The final jailbreak issue normally affects certain models of the 3Gs but possible can affect a 3G. Altering the baseband chip for your unofficial unlock my have damaged it.

TS3694 what is the error code 2003 when trying to restore an ipod touch

Im trying to restore a first generation ipod touch and it keeps coming up error code 2003. Ineed help to figure out to get the corrected.

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
http://support.apple.com/kb/TS3694#error2001

Can someone advise how to resolve the error message: E_ADEPT_UNKNOWN (error code 2003)?

Can anyone assist with an error message when I try to authenticate my Adobe ID in Overdrive: E_ADEPT_UNKNOWN (error code 2003). Thanks

try clearing your adobe.com cookies or using a different browser.

I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

See this support document for information about update and restore errors. Resolve iOS update and restore errors

Apple Configurator - Redeem Code Upload

I am trying to upload redeem codes for iMovie that I received from the VPP. I had to use StuffIT explanader to open the .zip file that I was sent. The files were then expanded to a .xlsx format. Apple Configurator (1.4.3) did not recognize this file type so I saved it as a .xls file. However, Apple Configurator could no longer read the file properly as I got the following error message.
Unable to import redemption codes for “iMovie”.
The spreadsheet provided has redemption codes for “iMovie”. Please provide a spreadsheet with codes for “iMovie”.
Any suggestions on waht might be going wrong here?

This is the console output:
"19/11/2014 10:48:04.069 pm Apple Configurator[6524]: ERROR - 1297519ms <ACUProfileInstallOperation: 0x600000189240 { UDID = 2991a2d4d7844f7c8f2b2cd3e3c69ad1a5c7dd22 }> finished in 0.14 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile ‟Telstra ENIW HS”" UserInfo=0x608001274ac0 {NSLocalizedDescription=Unable to install profile ‟Telstra ENIW HS”, NSUnderlyingError=0x600001a54640 "The profile “Telstra ENIW HS” is invalid."} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-550/Engine/Op erations/ACUOperation.m:151)"
//Al

Apple Configurator error app's identifier is missing when creating a deployment profile.

Hello,
I have a Bretford Powersync cart and I have a Macbook Pro with Apple Configurator on it.
I don't have any iPads yet connected they will come in next week, there will 30 of them.
I'm creating a profile and payload in Configurator on the Macbook right now and when I add Apps to be part of the package that gets sent to the iPads, it's giving me the error "App's Identifier is Missing". I'm just highlighting a cell structure app that is free that I downloaded and trying to add it.
I heard you have to add the .ipa file, but I can't find an .ipa file anywhere. When I search for .ipa it just shows me the same Cell Structure App icon and I end up getting the same error.
Just trying to get around this error message.
Thanks,
Matt

It won't let me edit my post, so I'm typing this reply to add...
I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated.

SOLVED !? Recovery. Your (new) PC needs to be repaired. Boot configuration error code 0x0000034

I booted my new-ish laptop and immediately got an EXTREMELY serious pre-boot error.
"Recovery. Your PC needs to be repaired. The boot configuration data is missing some required information. file:\BCD error code 0x0000034. ... press ESCAPE to go to (pre-)boot menu." (and laptop turns off after 20 secs)
After pressing ESC and getting the (pre-)boot menu, NOTHING I tried worked !! Tried several times.
I had to use a 6 inch e-reader to access the web. After a long long search and finding little of use, I found an obscure forum post that said to press 0 during the Toshiba pre-boot.
After a long wait. That gave me the Win 8.1 maintenance window. I followed the advanced options to auto-repair my laptop. After a long wait it told me:
"Could not repair PC" !!!???
I decided to click the reboot menu from this win 8.1 windows. It was basically my only option left.
After a long reboot, it seems to have worked !?? Some of my Win 8.1 settings have been lost AGAIN; e.g. task manager default viewing settings.
CONLUSIONS (brief):
- Not having a recovery USB
- Not having a recovery DVD (useless since Win 8.1 deactivated this)
- Not having the Win 8.1 install disk
- Not knowing the pre-boot press 0 key trick
- MAKE SURE you have a recovery USB for your system (cannot use a DVD on win 8.1)
- Don't believe Win 8.1 statements saying can't repair PC !!??
I never expected this from Toshiba and a non-cheap laptop.
Satellite P70-A PSPLPC-01Y007 Win 8.1 Purchased 3 months ago.
Solved!
Go to Solution.

Satellite E45t-A4300 part number PSUB2U-00K00P
Press f12 then advanced options, then Automatic repair or other options listed below:
From page 115 of your user manual-
Advanced options
Choosing this option presents you with another set of
options:
System Restore
❖ System Restore allows you to use a Restore point to
return the computer to a state at which it was performing
properly. Restore points are created:
❖ When new hardware or software is installed
❖ Manually by the user
System Image Recovery
Windows® will “Recover” the Operating system using a
specific image provided by the user.
116 If Something Goes Wrong
The Windows® operating system is not working
Automatic Repair
This feature automates the repair process. The Operating
System will automatically look for problems and repair them
if possible.
Command Prompt
The command prompt is a very powerful tool for advanced
users.
Startup Settings
In previous Operating Systems the majority of the options
found on this menu were available by pressing the F8 key
during the Windows® boot process:
❖ Enable low resolution video mode
Restarts Windows® using your current video driver at low
resolution. This allows you to reset your display settings
in the event they have been improperly set.
❖ Enable debugging mode
Starts Windows® in an advanced troubleshooting mode
❖ Enable boot logging
Creates a file that lists all the drivers that are installed
during startup
❖ Enable Safe Mode
Starts Windows® with a minimal set of drivers and
services. If the computer starts and runs in Safe Mode,
you will know the Operating System is most likely
working properly and that you should look to third-party
applications or drivers for the source of your problem.
❖ Disable driver signature enforcement
Allows drivers containing improper signatures to be
installed
❖ Disable early-launch anti-malware protection
Allows drivers to initialize without being measured by the
Anti-malware driver
❖ Disable automatic restart on system failure
Prevents Windows® from automatically restarting if an
error causes it to fail. Choose this option only if
Windows® is stuck in a loop where it fails, attempts to
restart, and fails again repeatedly.
Your support page is here - Support page
Your user guide is here - User guide
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Apple tv error code -3905

I'm trying to set up apple tv for first time and cannot get it to maintain network connection for more than a couple of seconds. Get error code -3905. Any clues??

Hi,
First post on this forum. I've been pulling my hair out, searching google like a madman trying to find out how to get past the dreaded (-3905) connection error code. Finally i ran accross this post from a lady who turned off her mac address filtering on her router. She said it worked.
So i have a netgear router, i searched around and turned off the mac address filtering box and my apple tv connected to my network instantly. I went to advanced setup/ wireless settings/ wireless card access list and it shows all my home devices connected to the network. I then UNCHECKED the "turn access control" box. And tried my apple tv and boom!
I hope this helps you or anyone! I was ready to return this thing.

I completed a full system recovery. Still getting a configuration error. (code purple).

I have a completed a full system recovery using vista. completely redid the hard drive with recovery disk. When startup occurs, I get a message saying a configuration error. contact HP. (code purple). Is this a hard drive issue? Help where to go next.

***Windows 7 code purple or Windows Vista code purple***
With the code purple error on the screen, press shift+f10 (the shift key and the F10 key (at the top of the keyboard) at the same time) to open a little screen called a command prompt. (So, you get a little black screen with white text that says something about your Windows verison first and a little ways down you'll see "C:\>". It's all ready for you to start typing.)
Type the following line, just as you see it here...
notepad C:\hp\bin\checkdmi\checkdmi.cmd
so it will look like this
C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
Press Enter.
You will see the text for the file listed in a window using a simple text editor.
Go to the beginning of the text. Press enter to make a space. Type this...
goto cleanup
So, whatever comes after, the first line looks like this...
goto cleanup
Save the file and exit notepad and restart your PC. You are good to go.

Apple Configurator error on launch "Please reinstall iTunes (Error -42110)"

I'm running OS X 10.8.5 and iTunes 11.1.1
I had Apple Configurator 1.4 working for a while, but one day opened it up and it's coming up with this same error:
"Please reinstall iTunes (Error: -42110)"
I've deleted iTunes.app from the the Applications folder, moved AirTrafficHost.framework and MobileDevice.framework from the /System/Library/PrivateFrameworks/ as described here https://discussions.apple.com/thread/3888313?tstart=0
then reinstalled iTunes and I get the same error message!
I have also tried deleting Apple Configurator.app and the above, and after reinstalling both it still doesn't work
Is it possible to get an iTunes uninstaller app that removes all the other files iTunes installs so I can reinstall?
Any help appreciated

Solved it! Kind of...
This was directly related to me authorising a machine in iTunes. I followed this guide and deleted the SC Info folder here /Users/Shared/SC Info/
relaunched Apple Configurator and it worked!
The problem I'm still having is that I'm trying to pre-install free apps on some iOS devices using Apple configurator. Every time I try this is fails on the app installation stage of installation with the error message 'Unable to authorize apps'.
Googling this error message tells me to Authorize the machine in iTunes to the Apple ID that I originally got the apps from, but as soon as I do this, Apple Configurator stops working with the above message!
Vicious circle!

HT5194 Apple Configurator, VPP code and Hardware failure

We use VPP for many iPads, but the likely hood of one of those being damaged/stolen/lost is high (devices imaged and deployed to multiple, and changing users) and we don't want to loose a VPP code each time one of our devices needs to be replaced due to damage, lost or stolen. Can Apple Configurator handle this situation w/o buying a new VPP code each time a new iPad is brought into the environment? I have read that backing up the configurator database should handle the issue if the MAC managing the devices and running the configurator goes down and needs to be replaced, but what about the actual devices themselves?
Thanks.

Hi cdgoodlett,
Your questions address a feature that many of us want Apple to support...the ability to recover and/or redistribute VPP codes, which is so important especially in schools. However, the process you are asking for is currently unsupported by Apple and most MDM providers. Currently the only way to recover VPP codes is to remove the app from Supervised iPad(s) using Apple Configurator. If you don't have the iPad, you can't recover the VPP code(s). So yes (unfortunately) if the iOS devices is lost/stolen/broken then the VPP redemption codes are lost.
If you were in a situation where a large number of devices were stolen all at once (like a whole cart or multiple carts), you may be able to call Apple Store support for Education at 1-800-800-2775 and explain the situation. I have heard of circumstances where VPP codes have been returned/recovered but that is a rare circumstance.
I know its not the answer you wanted to hear, but I hope this answers your question.
~Joe

"Configuration error" Code d'erreur: 1

Depuis plusireurs mois maintenant, je ne peux plus ouvrir Acrobat. J'en ai besoin pour travailler et le service d'aide Chat ne m'aide pas du tout.
Dès que j'essaie d'ouvrir un pdf une fenetre apparait avec ce message d'erreur :
« Configuration error
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 1
http://www.adobe.com/support/ »
J'ai déjà désinstaller et réinstaller. La première fois que j'ai réinstaller, je n'ai pas réinstaller le bon. Je ne savais pas que je devais dowloader toute la suite CS6 pour avoir seulement Acrobat. J'ai eu une version d'essais pendant 10 jours qui m'a dépanner.
Ensuite une gars du service d'aide par chat d'adobe m'a dit de télécharger tout la suite Adobe. Ce que j'ai fait. Mais le message d'erreur apparait toujours.
Un autre gars du même service d'aide m'a fait modifier les paramètre d'accessibilité de certains dossiers. Ce qui n'a rien changer non plus.
Finalement, 3 gars de se même service d'aide m'ont reviré de bord parce que je parle français et que mon ordi est en français. Il m'ont dit de téléphoner au soutient technique, mais au canada il est juste en Anglais.
Je suis vraiment à bout et je songe sérieusement à trouver un programme alternatif.
Ce forum est pas mal ma dernière chance, est-ce que quelqu'un peut m'aider!!!

J'ai le meme problème... quelqu'un a t'il la solution????

Apple Configurator Redemtion Codes Spreadsheet format

I need to supply a spreadsheet for Apple Configurator with redemtion codes to a customer. The customer lives in a non-VPP country and is not able to use VPP to buy the licenses.
Where can I find a description of the spreadsheet format used by Apple Configurator in order to generate the spreadsheet my self?
A sample file would also be great.

I've got support from Apple Germany. It seems to be a problem of version 1.1.2 of Apple Configurator and Mountain Lion 10.8.2
As mentioned above I had the same problem using 10.7.4 and 10.7.5 and Configurator 1.1.2. Apple Germany sent me a different spreadsheet, where I've put my codes in and it worked. Strange but true.
Other story, I bought 50 redeem codes, after installing 22 iPads it stopped, telling me that there are no more redeem codes left ?
Good luck contacting Apple directly

Apple Configurator, VPP Codes, Import

We tried to import a VPP code spreadsheet but when it came in it had some text that weren't codes.
It was suppose to have 20 codes and now it is showing 21.
One of the codes says https://buy.itunes.apple.com/.........
When I looked in the spreadsheet there was text in there that someone must have typed in.
Is there a way to clear the codes that were imported to Apple Configurator and redo the import after clearing out the text in the spreadsheet.
Any help would be appreciated. Thanks!

We tried to import a VPP code spreadsheet but when it came in it had some text that weren't codes.
It was suppose to have 20 codes and now it is showing 21.
One of the codes says https://buy.itunes.apple.com/.........
When I looked in the spreadsheet there was text in there that someone must have typed in.
Is there a way to clear the codes that were imported to Apple Configurator and redo the import after clearing out the text in the spreadsheet.
Any help would be appreciated. Thanks!

Apple Configurator error code 2003 MCCAndMNCs is invalid

Similar Messages

Maybe you are looking for