Apple Configurator: Profile Enrollment Trouble

I am having trouble installing the Standard Enrollment Profile on a set of iPad's. I get this error when I try to install Standard Enrollment Profile on them through Apple Configurator. I was wondering if any of you knew a fix or workaround to this problem? Thanks!

Based on limited experience with multiple profiles, it appears that the most restrictive profile takes precedence.  For example, if one restricts the deleting and installing of apps and the other one allows for the deleting of apps and allows for installing apps a device with both profiles will not allow apps to be installed or deleted.

Similar Messages

  • Transferring an Apple Configurator Profile

    Hello, I am wondering if it is possible to transfer a Apple Configurator Profile from one iPad to another. For example, I have a wifi configuration file on one ipad, and need to get it to the other. Is there any way to transfer it without connecting it to the original apple configurator computer where the profile was made/put on the original device? Is it possible to use iTunes, iFunBox or my computers file explorer?
    I am sorry if this is the wrong category. Moderator please put it in the right one if it is not. This is the most relevant category I could find.
    Thank You
    ~Zach

    Bump, I really need an answer.

  • How can I copy Apple Configurator profiles?

    I'm trying to maintain two different profiles with 60+ wireless access point "payloads" and I can't seem to load both of them at the same time because:
    "This Configuration Profile already exists. Do you want to replace it? Another version of this Configuration Profile ('<profilename>') already exists in the Library. Replacing it will overwrite its current contents."
    I've tried editing a copy with a different name and identifier, but that doesn't seem to work and I'm not going to re-enter 64 wi-fi ap passwords.

    Here are some replies I made to other users in the past that might help you. I hope these links lead to the correct posts.
    https://discussions.apple.com/message/11615443#11615443
    https://discussions.apple.com/message/9869476#9869476
    https://discussions.apple.com/message/5580927#5580927
    https://discussions.apple.com/message/10805500#10805500
    I could probably help you, too, but not in the near future. We're in the process of preparing to move & my older Apple products are packed away.

  • How to remove Apple Configurator Profile - iPad

    On my iPad a supervision profile has been installed using Apple Configurator. Is there a way to remove this profile without restoring.
    When I tried syncing my iPad to my computer a message came up, notifying my that my 'iPad is supervised with another computer and cannot be used with this computer.'
    I belive this has occurred because of this supervison profile and I can't seem to remove this profile.
    I don't have access to both the Apple Configurator application that was used to create it and the computer that it is supervised with.
    I have tried recovery mode and a few other basic ways that could remove this.
    I need a way to remove this profile without removing all my data or accessing the Apple Configurator itself.
    Max.

    Unfortunately, if you don't have access to the computer that the iPad was supervised with you won't be able to unsupervise it without resetting the device (and thus losing all of the apps and data).
    The idea behind Supervising is that control lies with the person managing the devices (teacher, I.T. staff, etc), not the end user. In Supervision mode, the person managing the devices is "king" and has control of installing apps, configuration profiles, etc. When an iPad is initially Supervised, it is wiped clean of previous data, apps, and settings. This prevents a personal device from being supervised by another person without their knowledge. Once Supervised, it is no longer a "personal" device…it is managed. The same sort of thing happens when you unsupervise a supervised device…it deletes everything so that the manager is no longer "king" and the user regains all control by starting with a clean iPad without data, apps, or controlled settings.
    You may want to try and manually back up as much as you can to services like Dropbox before resetting the device.
    I know this is not the answer you want to hear, but I hope it helps understand why it is what it is. Good luck.
    ~Joe

  • HT201460 We currently have Ipads set up with an Apple Configurator profile and the removal password has been lost.  What options do we have to remove or alter the profile?

    We have tried to alter the profile to push out a different password and to push out no password, but the the new settings do not copy over to the Ipad when connected via usb cable.
    Any ideas?

    You can try to reset and configure the iPad as a new device.
    Have a look at recovery mode and DFU mode.

  • HT201334 Apple configurator profile question

    How can you set the priority of profiles to install? Also, if one profile has a setting that overides another, which takes precidence?

    Based on limited experience with multiple profiles, it appears that the most restrictive profile takes precedence.  For example, if one restricts the deleting and installing of apps and the other one allows for the deleting of apps and allows for installing apps a device with both profiles will not allow apps to be installed or deleted.

  • ICloud overwrites Apple configurator profiles

    Hi !
    I have setup a bunch of iPhone with Supervision when the option "Allow to connect other computer" did not exist.
    The users took photos and created contacts with the supervised iPhones. Now, I want to be able to recover the pictures every now and then so I did a backup of all the iPhones, un-supervised them and redid the preparation steps and checked the option to allow connection to another computer.
    My problem is that if I recover the iCloud backup of the iPhone, to get back the pictures, apps, contacts and everything, the Profile seems to be recovered at the same time and the option to connect to another computer is overwriten.
    Is there a way to give the option to connect to another computer AND keep the contacts at the same time ? I can't seem to find a solution to this problem.
    Thank you

    Sync the contacts to a cloud service. iCloud, Yahoo, Google, or your own Exchange server. You can extract the photos from the phone just like you would from any other digital camera. The Camera Roll on the phone is not intended to be permanent storage, just as you wouldn't leave every photo you've ever taken on the flash card in your camera.

  • Apple configurator vs MDM profile

    Hi All
    I am new this community . I have a doubt about Apple Configurator profile vs MDM profile .
    Through the Apple Configurator forbidden  the camera and using the MDM would like to re-enable it. Is it possible? Will it work this way? Is the MDM able to override the PASSWORD PROTECTED configuration profile from the Apple Configurator?

    both are not my expertise and I am unable to tell whether you want to deal directly with your mobile device or the remote management thereof
    give more details so tha we may get you to right forum, as this is posted in Using ASC (how do I use this forum?)
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    From ChitlinsCC: "Keep It Short and Simple" - Take your time...
    regards
    CCC

  • IPad/Apple Configurator/changing profiles on existing backups

    Is there a way to back up an iPad that has an exisiting Apple Configurator profile applied, and then apply a different profile and restore the data without applying the original profile?  Everything I have tried seems to apply the original profile when restoring the backup.  If this is not possible, how can I apply a new profile to an iPad without the user losing all of his data??

    Thanks Chris.  I have an Apple Configurator profile applied to a users iPad that blocks the App Store.  I need to place a new profile on the iPad that allows access to the App Store.  However, when I check in the device it creates a backup and the original profile is saved in the backup.  When I try to apply the new profile it is deployed to the device successfully but when I restore the backup for the user the original profile overrights the new profile.  Both profiles are present after the backup is restored.  I need to be able to place a new profile on a device AND restore data from a backup without that backup applying the original profile.

  • Apple Configurator .ipa files

    Does backing up an iPad to iTunes, store copies of all apps(with the extension .ipa) to the local machine (Mac mini Server late 2012)?
    If this does not occur, how do I get my iPad apps with the extension .ipa to my Mac mini Server for distribution with Apple configurator/Profile Manager?

    You"ll have to use iTunes on the server
    Download the apps you need
    Profile manager will pick up the apps from iTunes
    Same with Apple Configurator, download the apps with iTunes on the machine that's running AC
    AC will pickup the apps from iTunes

  • HT6029 Having trouble restricting the restore function on an iPad through Apple Configurator

    Having trouble restricting the restore function on an iPad through Apple Configurator
    I cannot find the setting the allow/disable this feature.

    Configuration profiles do not allow you to apply a static IP address to a device.
    Instead, it would be highly recommended to configure static IP addressing within the DHCP server itself. This would accomplish what you want without worrying about which proifle goes on what device, etc. Configurator can also export the MAC addresses to make life easier in setting this up.
    Right click the 'All Devices' in the Supervise tab, click Export Info > Device Information > WiFi MAC Address.

  • HT201334 Apple configurator vs Profile Manager

    I downloaded apple configurator and have it working. Then I realized profile manager in OSX Server does the same thing. What is the difference, can I leave it as is? Any benefit of just using profile manager?

    Apple configurator has its uses.
    Apple configurator can be used as a "manual" standalone solution to manage you iDevices and AppleTVs.
    Apple configurator can be used in blended approach with Profile Manager.
    With Profile Manager you can manage iDevices , Macs , and I believe AppleTv over the AIR.
    - Apple Configure Stand Alone.
    When using Apple Configurator by itself you can , lock down an iPad in a way you see fit.
    1. You can make an iDevice in "Supervise Mode" increasing restricting of your iDevice , Profile Manager cannot do this at the moment , this feature will be available in Mavericks.
    2. Any future configuration changes to your iDevices , must be physically plugged in everytime for those changes.
    3. You can distribute free and paid apps.
    4. You can update your IOS updates all at once. When IOS 7 comes out this fall you probably dont want to touch every iDevice and update 1 at a time. You can use Apple Configurator to download the latest IOS , and any IDevice that you plugin will receive the update, this means downloading th IOS update one time on the mac, and pushing it out to whoever needs it. Profile Manager can't do this.
    5. You can name several iDevices sequently. If you have a cart of 30 it will be easy to rename your iDevices. Profile Manager can't do this.
    6. Apple configurator allows you to "backup and restore" its not a true complete image but its close. Profile Manager does not do backups or restores.
    7. Apple Configurator can be used to erase an iDevice.
    8. I'm probably missing some more features.
    - Profile Manager Stand Alone
    1. You can manage Macs not just iDevices.
    2. You must enroll the device before you can manage it, this can be done by pushing out an email , via a website etc.
    3. Everything happens over the Air.
    4. When enrolling , users can use their Open Directory or Active Directory ( if your Apple server is bound to AD server ). You can also create a generic account for enrolling purposes.
    5. You can wipe devices over the air.
    6. You can make pass code resets for iDevices.
    7. You can manage users in groups , even nested groups. I manage staff and student iDevices. Our wireless system is seperated for staff and students each wireless has its own SSID. I created 2 upper level Profile Manager Groups , one called WiFi Student and one called WiFi Staff, all my student iDevice groups are nested under WiFi Student group and all my staff idevice groups are nested. This makes managing my wifi a breeze. I also include my mifi wireless info , in case i need a backup emergency wireless.
    8. Im sure theres other features.
    - Apple Configurator And Profile Manager Blended
    1. Push out initial wifi settings. I setup a simple wireless router to connect my devices ( there are types when I setup over 50 ipads , and our network runs out of IPs)
    2. You can use Apple Configurator to push out Profile Managers "enrollment profile" to many iDevices. You dont want to enroll a full iDevice cart one at a time via a web browser.
    Maverick and IOS 7
    In the fall everything will change , it is amazing what we will be able to do. Over the Air Supervise Mode , Install Apps over the air with no user interaction, App codes become licenses , which are revokeable and reusable. Out of the box enrollment ... There may be no need for Apple Configurator come this fall. So many things are changing I recommend watching the new WWDC2013 Videos, specially the one on device management.
    Back to original topic. 
    I value both products , they have their specilties and when you blended , you can get things done efficiently.

  • Configuration Profile for Apple Devices with ISE

    Hi,
    is there any possibility to put configuration profiles on apple device with the ise? I need to disable the dataroaming function in forgein countries for ipads.
    Best regards
    Felix

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

  • Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

    Good afternoon,
    I am really struggling with a deployment of 10 iPad Minis.
    The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
    I have configured Apple Configurator in the following way:
    Under Prepared:
    Settings
    Name is ticked with 'Number sequentially starting at 1'.
    Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
    Update iOS is set to "When update is available". Erase before installing is ticked.
    Restore is set to "Don't restore backup".
    No profiles are listed in the profiles section.
    Apps
    I have copied in some appropriate apps.
    Setup
    Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
    I have not configured Device Enrollment.
    In "Configure Settings..." Device Enrollment is not configured.
    After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
    Hello, slide to setup
    Select language, UK selected
    Select Your Country or Region, UK selected
    Choose a Wi-Fi Network, correct network selected and authenticated
    Location Services: Enabled
    Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
    Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
    Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
    Have skipped configuration and erased iPad before trying again, same problem.
    Any suggestions would be really appreciated.

    FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • Apple Configurator: Enable to install profile code=14

    So I am trying to manage a iPhone 3Gs using OSX Server  and Apple Configurator.
    For OSX server:
    I am running:
    - Open Directory
    - DNS with the zone local and the mini.local (which is my OSX server machine)
    - Websites
    - Profile Manager
    I created a self signed certificate for the OSX Server profile manager, checked the 'Sign Configuration files' where I use this self signed certificate.
    In Profile manager (https://mini.local/profilemanager/) I created a Enrollment Profile which I downloaded and I downloaded the trust certificate.
    In Apple configurator I created a WiFi profile which only contains information about my WiFi connection.
    Using Apple Configurator I configure the iPhone 3Gs (Supervision is on) and I upload the three profiles:
    - Wifi
    - Trust
    - Enrollment
    Everything works, accept for the enrollment profile.
    I tried several stuff, including setting the ipaddress for the DNS of the mini into the iphone.
    Unfortunately I keep getting this error in my logs:
    Jun 22 13:44:27 mini.local com.apple.usbmuxd[77]: CheckForChangedPairingRecords Missing bonjour listener.
    Jun 22 13:45:12 mini.local Apple Configurator[19246]: ERROR - 9684074ms <ACUProfileInstallOperation: 0x60000019e780 { UDID = 468c1ab5b9598098542fd04bbdb4f6a52b424c94 }> finished in 45.54 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile \u201fEnrollment Profile\u201d" UserInfo=0x60000087fb80 {NSLocalizedDescription=Unable to install profile \u201fEnrollment Profile\u201d, NSUnderlyingError=0x608000858330 "Profile Installation Failed"} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-424/Engine/Op erations/ACUOperation.m:151)
    Jun 22 13:45:12 mini.local Apple Configurator[19246]: ERROR - 9684075ms <ACUConformProfilesOperation: 0x6000003a6f20 { ECID = 4124343178700 }> finished in 48.59 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile \u201fEnrollment Profile\u201d" UserInfo=0x60000087fb80 {NSLocalizedDescription=Unable to install profile \u201fEnrollment Profile\u201d, NSUnderlyingError=0x608000858330 "Profile Installation Failed"} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-424/Engine/Op erations/ACUOperation.m:151)
    Jun 22 13:45:12 mini.local Apple Configurator[19246]: ERROR - 9684077ms <ACURefreshPolicyRequestOperation: 0x60800015e090> finished in 50.89 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile \u201fEnrollment Profile\u201d" UserInfo=0x60000087fb80 {NSLocalizedDescription=Unable to install profile \u201fEnrollment Profile\u201d, NSUnderlyingError=0x608000858330 "Profile Installation Failed"} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-424/Engine/Op erations/ACUOperation.m:151)
    Can you help me figuring this out?

    Self fixed.  Found an unauthorized app had modified the HOST file to prevent check in with Apple.

Maybe you are looking for