Apple Coposit AV cable problem...

I purchaased the Apple Coposit AV cable from Apple in hope of projecting the videos I have loaded in my iPhone and iPad. When attempted to play the video,  I hear the audio only but NO video. Is there something I missed to do?

Hello Allecra,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with a Digital AV Adapter. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
When using an Apple Digital AV Adapter manufactured before early 2012 with iPad (3rd generation), you may see the "This accessory is not supported" alert. Dismissing the alert will allow you to use the adapter.
For optimal performance, you may need to adjust the video resolution or settings for your display. If your display offers an "auto detect" or "factory default" setting, you may be able to use these options to optimize video resolution and display.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

  • Apple AV component cable problem

    Hi I'm new, i hope you can help me!
    my brother gave me the Apple AV component cable (audio: red white, video: red green blue), I was very happy about it and wanted to try it on my tv, but then i recognized that my tv doesn't has the red green and blue ones for video.
    It has red white and yellow (scart).
    cause of that i bought this http://www.elektro-planet.com/shop/catalog/images/5525-3rgb.jpg , but when I try to use it I don't get anything on the screen.
    Only audio is appearing.
    Can someone help me pls?

    I had the same issue at first when I tried to plug the component cable into the front of my tv. Then I found the component connectors on the back of my tv.
    The fuller explanation is there are two kinds of cables - Component and Composite.
    Composite cable has three colors:
    Red / White for sound
    Yellow for video
    Component cable has five colors
    Red / White grouped as a pair for sound
    Red / Blue / Green for video
    My tv has AV 1 on the front, it uses Composite - and AV 2 on the back using Component. Hopefully yours also has component plugs somewhere.
    I took a movie over to someone else's house and they only had Composite style connectors. Connect the Red/White audio plugs like normal and the green component plug into the yellow composite slot and you get black/white. It's the best you can achieve between two different techs.
    I suggest going out and picking up the composite cable as well. Because, frankly, composite is the lowest quality of image and if you've got a higher quality tv then component will do you a better image. Seriously, connecting it all up on my tv and comparing picture quality side-by-side by flipping back/forth AV1 AV2, keep the component cable and get the composite cable as a "fall back" as necessary.

  • Apple TV worked until today. Message says unsupported signal check your output device.  I have checked hdmi cable with another device and it's fine. Put on a different tv and same message.  Went out yesterday and bought a new Apple TV and same problem.

    Apple TV worked until today. Message says unsupported signal check your output device.  I have checked hdmi cable with another device and it's fine. Put on a different tv and same message.  Went out yesterday and bought a new Apple TV and same problem.

    Which TV do you have.
    You may wish to try the following:
    Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

  • MAC PRO USB Problem - Traced to bad Apple Keyboard Extension Cable

    I found a fix to a problem synching to my itunes Library on my early 2008 MAC PRO.   The Apple supplied USB extension cable for the keyboard was defective.
    The symptoms were hangs in itunes and finder synching to iPods and transferring data to USB hard drives. The iPods and hard drives never lost power and no errors/log entries were made. The transfers simply stalled and would not continue. itunes and finder would hang until the drive or ipod was removed. These devices were installed directly to USB ports on the MAC PRO. No other USB devices were connected except for the aluminum keyboard and mighty mouse; the mouse was connected to the keyboard. The keyboard was connected using the USB extension cable that shipped with the MAC PRO.
    Hardware diagnostics were all clear. The keyboard and mouse never had any connection problems. Only itunes syncs and hard drive copies would fail; these would occur at random times. I had an open ticket with Apple to have the logic board replaced as it was diagnosed to be a hardware/USB problem.
    Removal or replacement of the extension cable on the keyboard (which was connected to a different USB port and NOT in the USB chain with the ipod and hard drives) permanently fixed the problem. I cancelled the Apple HW replacement.
    I have noted several posts with others having problems with USB ports and devices. I wonder if Apple has an unknown problem with bad keyboard extension cables.

    I think you may be onto something there. I'm just a few weeks into my second Mac Pro and again it's having the same USB problems which led Apple to give me a replacement machine previously. I went through several weeks of considerable testing with Apple Engineers prior to that - an Apple Care application to collect data from my machine, Apple Developer USB prober and two clean installs. The latest machine initially showed no sign of the problem then it started again - 2 iPods "can not be read or written to" part way through sync, Aperture quitting importing from USB SD card reader, USB drives dismounting etc. So I pulled out the Aluminium keyboard and, lo and behold, the iPods managed to get all the way through synching without errors. I really like the alu keyboard so it's a huge shame that it might be the cause of all my problems so far - and the Mac Pro is otherwise a beautiful computer.
    But is this really a hardware problem of the internal USB cards and power management or supply?

  • Apple AV Composite AV Cable Problems

    I can not seem to use the Apple AV component cable to watch videos from my iPhone 4S onto my TV.
    I have made all the right connections between the iPhone and TV, I believe. However, I was not able to watch any of my iPhone videos on my TV yet. The AV cable's Manual does mention to set "to send your ipod or iphone to send a video signal out to your TV" - which I do not know how to do on my iphone. I have not seen any "TV Out" setting on my iphone.

    Settings > General > TV Out
    This choice is visible only when your video cable is plugged into the dock connector of the iPhone.
    In my case, I have to remove the bumper I have on the iPhone, since the video cable is a tiny bit wider than the normal dock connector cable.

  • Problems using Apple Component AV cable

    I can not seem to use the Apple AV component cable to watch videos from my iPhone onto my Samsung TV.
    I have made all the right connections between the iPhone and TV, I believe. However, i was not able to watch any of my iPhone videos on my TV yet. The AV cable's Manual does mention to set "to send your ipod or iphone to send a video signal out to your TV" - which I do not know how to do on my iphone. I have not seen any "TV Out" setting on my iphone.
    Can anyone help? I have bought the AV cable from an Apple store, and I thought I would be able to use it fairly easily.

    Just plug the cable into the dock connector on the iPhone and the other end into your TV (making sure the right colours go with the right colours ) and check in Settings>iPod that widescreen is either on/off and that the correct TV Signal option is selected PAL/NTSC then change the TV's input to whatever the signal input should be (Component 2 on my TV) and voila you play movie it shows on TV (hopefully) it should really be plug and play tough it's worth checking you have the right cable for the job Component/Composite

  • My iPhone 4 is no longer recognised by my laptop, and no longer registers being plugged in to charge, even though it will charge slowly if plugged in and turned off. It's not a cable problem or a computer problem, as I've checked these.

    Hey, over the past couple of days my iPhone 4 (GMS, Model A1332, EMC 380B - running on iOS 7.1.2) has begun inexplicably intermittently not recognizing being plugged in to charge or being connected to my laptop. As of today, it has complete stopped recognizing being plugged in to charge or connected to the laptop.
    If I plug it in to charge, whilst it is on, nothing happens and the battery drains.
    If I plug it in to charge and turn in off, it will charge very very slowly - though it will charge fully after a long time.
    When I connect it to my laptop, nothing happens - it doesn't appear in iTunes, and it doesn't charge or recognize being connected to the laptop (there is no charging symbol, no noise from either phone or computer registering the connection as it usual did, or another sign of any connection between the devices, though, again, it will charge very slowly if turned off).
    I've ruled out the possibility of it being a cable problem, by using a friend's cable and finding that didn't allow it to recognize being plugged into the wall to be charged either, or being plugged into the computer.
    My friend's cable does work on their own iPhone (ie, when plugged into the wall with their cable, their iPhone acknowledges this and charges properly, and when plugged into my computer with their cable both my computer and their iPhone recognize the connection).
    So, it's definitely a problem with my iPhone itself, but I don't know what.
    As I say, it will charge very slowly, if it's switched off whilst it's plugged in, but it won't acknowledge being plugged in, and will only drain if it is turned on whilst being plugged in - and it will not recognize being connect to my computer.
    Please help me figure out what is wrong with it, as this is beyond annoying and I'm literally banging my head against the wall - the iPhone is little over a year old.
    Cheers.

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • IDevices and Apple composite AV Cable - Not Working

    Hi...
    I've had problems connecting my iPods (iPod 30GB Video 5.5Gen, iPod Touch 1st and 2nd Gen, with latest capable software up to date) and my iPhone 4 (iOS 6 up to date) to my Samsung LED TV Series 5 using the original, Apple, composite AV cable. Everything is plug in, the way it should be, according to the manual. Devices charge and the Settings menu even displays the TV Settings... It shoud work right?
    No... No audio (tried to play some music), no photo, no video (no images, no audio), nothing...
    The composite AV cable is fine and works on a crappy 15 to 20 year old CRT TV (mp3, video and photo).
    I've adjusted every TV-Out setting there is, on both LED TV and iDevices with no result...
    Don´t know waht else to do... Need help, plz... Any suggestions????
    Thanks

    I'm confused. You mean that you're expecting to charge your iPhone by connecting it to the TV with a Composite AV cable? That's not going to work; a composite video cable doesn't supply power to the power input pins on your iPhone's dock connector.
    Plugging the iPhone to the USB wall socket directly using my regular cable gives the same error so I guess it is the voltage?
    Amperage, most likely. There quite likely is insufficient power from that USB port to charge the iPhone (something not infrequent with computer USB ports, and we know nothing about what that USB port is hooked up to.
    BTW, to me it would be very risk to plug an iPhone into some USB port about which you know little or nothing. I'd suggest you just use the charger included with the iPhone.
    Regards.

  • Apple AV composite cable & extension cable

    Hi everyone,
    Please can anyone help me with my problem?
    I went to the apple store and bought the official AV composite cable 30 pin for my device.
    It's working perfectly BUT ...
    When I'n connecting my device to the AV cable via an extension cord (1 meter), image will not show at all and I have no sound...
    Working scenario :
    device ---> Apple AV original cable  ---> TV
    Non working scenario :
    device ---> third party extension cable ---> Apple AV original cable  ---> TV
    Any idea?
    extension cable is new...
    THANKS !!

    Hi Lyssa, well that was my first guess indeed but yesterday I managed to make it work ...
    Done nothing special but connecting and disconnecting the cable again and again...
    I think the quality of the extension cable is to be considered. I have ordered another one...
    So to my question : could we use an extension cable and an apple AV composite out cable : answer is YES !
    Thanks for the help!

  • Thunderbolt display video died-Cable problem??

    My TD (paired with a Retina) video seems to have lost its video.  Audio working fine.  Could this be a cable problem?

    I can confirm that the Thunderbolt Display will work when plugged in to the 2011 MacBook Pro 15" and a 2011 Mac Mini Server connected via Apple's Thunderbolt cable.  When both systems are connected to the monitor, the display will always prefer the system connected to its display port,  when it sleeps or is powered down, the other system detects the available display and connects to it automatically.  I can't imagine a more ideal sinerio!
    Thank you Apple!
    Jason
    Nerds Limited

  • My iphone 5 says its charging but it isn't. I have a Apple charger. The problem is sporadic. One day fine next day won't charge

    My iphone 5 says its charging but it isn't. I have a Apple charger. The problem is sporadic.

    Hi gotwaxed,
    If your iPhone is not charging while plugged into the wall adapter, then I'd like you to please follow the information outlined below to help resolve the issue.
    If the battery doesn’t charge
    If the battery doesn’t charge, unplug your device and try these steps:
    Look at the connector at the bottom of your device and make sure it’s free of debris.
    If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
    Try a different USB cable, USB power adapter, or USB port.
    If everything seems to be working, reconnect your device and wait for 30 minutes.
    If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
    Get more help
    If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

  • My apple Tv has audio problems when streaming from my NAS server.

    My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

    XMBC requires a hack, we cannot help with hacked devices.

  • Apple certified lightning cable?

    I am looking for a non-apple but apple certified lightning cable. Can I find a list of certified cables online? Also came across cables made by Belkin, iComsta, and Miracase sold here (so I don't have to order online), but I am wondering if the cables work fine?

    There's a problem buying Apple-certified and even "genuine" Apple products from less than honest dealers. A device can say it is Apple compatible, or even say it is Made by Apple, and still be counterfeit. And many of these are actively dangerous, to both you and to your phone. For example, take a look at this video: https://www.youtube.com/watch?v=wi-b9k-0KfE.
    You don't have to watch the whole thing if you don't want to; just the first few seconds demonstrate the problem. SPOILER ALERT: BOTH of the devices pictured are counterfeit, not just the obvious counterfeit on the right. The one that looks like and says it is Apple (on the left) is a fake also.

  • My 3rd generation Apple TV has a problem with ghosting images.

    My 3rd generation Apple TV has a problem with ghosting images.  Whenever it switches to a black screen (between screens, during shows) images from the previous screen are still "visible" and it's driving me insane.  I know it's not the TV, no other components have the issue.  I've tried switching out HDMI cables to no avail.  Anyone else have this issue or know of a fix?

    To fix the Apple TV, you need to plug it into your Mac or PC with a USB cable, open iTunes, and restore the firmware on your Apple TV.
    Here is a link that will help: http://support.apple.com/kb/HT4367

  • I am trying to connect my ipod classic to a tv and have tried many cables including the Apple composite AV cable.  No success.  Any thoughts?

    I am trying to connect my ipod classic to a tv (sony bravia 1080p) and have tried many cables including the Apple composite AV cable with the 30 pin connector on one end and three RCA connectors on the other.  Audio works but video does not.  The ipod classic screen says to connect to device when it is already connected. No success.  Any thoughts?

    Hello, anabelleho. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    Jason H.

Maybe you are looking for

  • CD drive does not appear to be working properly

    I loaded a CD to install some software and the drive never gets up to speed. The disk is also not displayed on the screen. All preferences seem to be set correctly.

  • Jar  don't  run - NoClassDefFoundError

    Hi, my application is running. But when I run the jar file I get this error: Exception occurred during event dispatching: java.lang.NoClassDefFoundError: javax/xml/transform/TransformerFactory at de.cas.mercatorintegration.MappingTransform.mappingTra

  • Lost pages within a file

    My FW file contained 21 pages (1 month to build). This morning as I was starting to slice on my first page, an internal error popped up and froze the app. There was no way out other than a system restart. When I went back to the file, 14 pages were g

  • Message KD258 - Settle Process Order by KO88

    Hi gurus, When I run KO88 I get following message: Final delivery not entered for the order. It is not technically completed. I have checked in CO03 and the order was TECO before I try to settle it. Does anybody can help me? Thanks.

  • Temporary table space?

    Hi, I created view called swartview. and when i execute select * from swartview i get this error ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP wat does 128 denote?? 128 mb or kb.. Is it OK to add a datafile for teh tablespace