Apple Device Drivers Missing on Windows - I've Tried Everything

To sum it all up:
My laptop will not recognize my ipod/itouch through usb cables therefore I cannot connect with Itunes or charge my devices through usb.
My ipod/itouch does not show up under devices, not even under "hidden device" options.
Apple Mobile Device Drivers is no where to be found on my laptop. It's not under device manager, it's not under USB drivers or any other option listed in device manager.
I've tried re-installing Itunes and all Apple programs over 5 times now.
I do not think it is my laptops usb ports as they work for other devices that use a usb connection such as my printer.
I've tried connecting other Apple devices through usb and they do not work on my laptop.
This is driving me INSANE. If anyone has any solutions that would be GREATLY appreciated.
Thanks!

Hi
so windows requires the apple mobile drivers in order for your device to be recognised by the computer and iTunes
if you have remove iTunes from your pc but not followed Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support, if you remove iTunes in the incorrect order , then when you go to reinstall iTunes will not install in the correct order,
if you follow the above link exactly as stated and once removed, go to reinstall iTunes with your iOS device connected to pc , this will insure that the correct drivers are installed, once iTunes has downloaded and launched , disconnect phone , unlock screen, reconnect and allow access

Similar Messages

2 base system device drivers missing for dv9731ca on windows 7 os

2 base system device drivers missing need help installing cant find them

Hi:
You need this driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&dlc=en&lc=en&...

When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows

When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows.Thanks

You are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

Coprocessor drivers missing after window 8.1 installed

coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.

morris2672 wrote:
coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.
What program are you talking about? Coprocessor is built into the Processor nowdays...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

TS1424 My Apple ID has been disabled. I have tried everything and cant get any help correcting it. Any suggestions?? Please help!! I have 25 updates and can't update anything

My Apple ID has been disabled. I have tried everything and cant get any help correcting it. Any suggestions?? Please help!! I have 25 updates and can't update anything

http://www.apple.com/support/contact/

Apple devices not detected in Windows 8.1

Win 8.1, Itunes 11.2.2.3, Ipod 5 and Ipad Air not recognized in iTunes nor PC. Tried everything I've found in the net and nothing helps. USB ports working fine. Apple mobile device USB driver not listed. This is driving me nuts! Don't send me to the Apple support 1538 case. Please help!!!

Excellent and thanks for the "spot on" tip! I only wish I had found it before bringing up a different compter to re-sync my Apple mobile products, which of course meant I had to rebuild my libraries on that system.
On Windows 8.1 64 bit I did find the steps to be a little different from what Steven outlined and for those less compfortable with technology I thought I would include a version edited for Windows 8.1 64 bit specifically.
Connect You Apple Mobile device to the PC with iTunes.
In the PC's Device Manager expand the "Portable Devices" entry.
Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose "Update Driver Software" from the shortcut menu.
Choose the option to "Browse my computer for driver software" and browse to: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers and highlight that folder for the driver update.
Click "OK" then "Next" and your Apple mobile device should now be rocognized (verify this in iTunes)
Repeat for any other Apple mobile dvices synced on this computer.
All credit to Steven, however!

'No device drivers found' error Windows 8.1 - Windows 7 downgrade installation

Hello,
There are numerous threads with the same issue online, but none of the solutions have worked for me, so I'm posting my own. I did contact Microsoft and Lenovo, but Lenovo is asking for money that I can't afford for tech support, so I'm hoping someone here
can help me out.
Here's the situation:
I have a Lenovo Y510P that came with Windows 8.1. Half a year later, I'm sick of 8.1 and want to downgrade to Windows 7 (I know that simulation softwares like ClassicShell and such exist, but I would really rather just use Windows 7).
I downloaded a legitimate copy of Windows 7 Ultimate 64-bit and burned it onto a DVD disk.
I also downloaded all of the Windows 7 device drivers from this Lenovo site: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y510p-notebook?TabName=Downloads
^I had to specify the model number and OS, so I'm hoping I downloaded the correct drivers (all of the drivers are .exe format, is that what it's supposed to look like?)
I put all of the drivers onto a flash drive.
So, I am now equipped with a DVD with Windows 7 on it as well as a flash drive with all of the drivers on it.
I boot from the disk with the DVD and flash drive attached. Windows 7 installation begins and here I get the error, 'no device drivers found.' When I click 'browse', I see that the flash drive is recognized, but the files on it aren't.
What do you guys think the issue is??
Best,
anon27

Hi,
How do you installed Windows 7 on that Machine? Is the machine UEFI based?
We may follow the below article to install Windows 7 64 bit on UEFI based computer:
Installing Windows 7 on UEFI based computer
Besides, when did you received the error message“' no device drivers found.“ ?
For the device drivers, we'd better make a contact with the manufacturer to check if we have the proper drivers available.
Best regards
Michael Shao
TechNet Community Support

*** DVD-RW & CDRW Device drivers "missing" when booting from Cd's

Hi
I am using the MSI 875P Neo FIS2R Mobo and I have been having a problem with booting from CD's.
When I use the WinXP CD and various other bootable CD's, I don't have any problems at all, but when I insert a Maxtor "PowerMAX" or MaxBlast bootable CD, I get the following messages:
** ERROR: No CD-ROM DRive found, please check power cables
** ERROR: IDE CD-ROM Device Driver NOT installed
As you can see from my signature, my drives are the LG CDRW and LG DVDRW drives.
When I insert the same CD's into another computer with an ELITE AMD mobo, my drives and device drivers are found and they work just fine.
I have re-installed both computers and then, installed all of my drivers and programs and then updated from Windows Update, but when I try and use the Maxtor bootable CD's in my 875P, I am told that no drives or device drivers were found but if I swap them to the ELITE computer and boot from the CD's, my LG CDRW & DVDRW drives and device drivers are found and the CD's work perfectly.
Can anyone help resolve this problem on my MSI 875P Neo FIS2R?
Regards
Brave01Heart

Hi Maesus
Thanks for the response and I'll certainly give your suggestion a try.
I'm sure it's set to "Native" but what difference does it make if it's set to "Legacy"?
Regards
Brave01Heart

Device name missing for windows computer

Hi,
I am following the article http://myitforum.com/myitforumwp/2013/11/08/scom-2012-override-free-space-monitoring-for-page-file-drive/ and at the stage of creating dynamic members for a group, in Windows Computer, I do not see a "device name"
field for Windows Computer?
I am on SCOM 2012 R2 UR3. When doing this from the console, it's not the console on the management server (if this matters).
Thans

Hi,
How about doing this from your management server?
Have you import Windows operating system management packs to your management group? If not, please first download the management pack from the below link:
http://www.microsoft.com/en-us/download/details.aspx?id=9296
And import it to your management group.
Regards,
Yan Li
Regards, Yan Li

SBlive 5.1 Digital, Drivers wont install. I've tried everything

Hey,
Guess I'll try my luck here
I have a SoundBlaster Li've 5. Digital card. Model # SB0220. I lost the install CD, but I was able to download a copy of the install CD. I recently wiped my dri've because I was getting hit up with adware and stuff (It was that time anyway). And now I can't my SBLi've drivers installed. When I try and run setup from the CD, it just says I don't have an SBLi've sound card. However, Windows does detect it. I've tried everything and it's just not working. No drivers from the web work. Creatives auto update doesn't work (Cant find the card). Is there anything else I can do? I'm going crazy...
Thanks

I have what I believe is the cure for the card detection problem. Anytime I post it, the post is usually ignored and the responses to the problem continue to be to move the card to another slot, make sure your card is a retail version otherwise contact your OEM distributer for a replacement cd, etc. Nobody seems to want to try my solution, although it has worked for me everytime I've encountered the problem. I hope this helps you.
Okay. So, the Creative installer tells you to install a SoundBlaster audio hardware or go away. What to do?
If you've got the install cd, locate CTZAPP.EXE in the Audio\English\Drivers folder. If you've got the Uni-Pack download, extract the file with WinZip or WinRar and locate the CTZAPP.EXE file in the drivers folder. Run it. If it's one of the newer ones that have the check box for "replace, overwrite any previously installed Creative drivers and software," then check that box and answer yes to confirm when asked. Reboot when prompted by the CTZAPP program.
Upon reboot and Windows is loading, you may get an error message about regrun not found. If you don't, great, but it hasn't negati'vely effected my installations either way. Once Windows is completely loaded, restart the computer again. This is important!
You may now run either the cd or the Uni-Pack setup program and it will magically not have the detection problem. If you're running the cd setup, uncheck Windows Drivers but install the rest. After the reboot, locate the 4MB Soundfont file in the Audio\Common folder on the cd and copy it to your Windows\System32 folder. You'll then be able to load it into both Soundfont Banks with the Soundfont Manager. If you're running the Uni-Pack download, then install all of it including the Windows Drivers. This way you'll get the 4MB Soundfont to install from its hidden compressed cab within the Uni-Pack. Upon reboot, however, you'll find that Windows Device Manager will only show three of the many driver files that should be there. Simply either run CTZAPP.EXE to reinstall the WDM driver over itself or use the Device Manager's Update Driver button and choose the Have Disk button to point Windows to the previously extracted Uni-Pack driver file. Cd users won't have this problem since they are choosing not to install Windows Drivers during the setup process.
This has worked for me with several different Li've! cards and on 98, Me, XP. The only problem might be if you get the error when using the older driver series for Li'veware 3.0 (98 users who want the VXD's for the dos support). I couldn't locate a CTZAPP for those drivers, and simply installing the drivers using Windows hardware detection works, but the Li'veware installer still thinks you don't have a SoundBlaster hardware installed. So, you get the drivers but no software. That's a rare problem though. It's mostly the newer installers that have this bug.
And, it is a bug. This happens whether you have a boxed retail card that the software is designed for or an OEM. It doesn't matter. Usually, a fresh install of Windows on a formatted hard dri've will solve it, but I think you'll agree that my way is nicer! The problem has happened almost every time if I've ever uninstalled the Li've! software or drivers. Run the installer, and it won't detect the card properly. Weird.

Please help. Half my contacts are missing and think I've tried everything!

Hi there
Sorry this is a long post but I'm a bit desperate and hope you can help:
I dont have a PC or ipad or anything but do have an iphone 5 and over the weekend my emails (to my live.com account) weren't sending off my phone.
So I deleted the live/hotmail account and reinstalled the account. I noticed that upon re-installation there was no option for 'contacts', just 'notes' and 'calendar' but I didnt pay it much attention as I have an exchange account listed on my phone which features contacts, email, notes, calendar etc etc.
Yesterday out of the blue some of my contacts went missing (after sending a text to a person, a few hours later their name vanished). I deduced that all the contacts that had vanished were email addresses and newer numbers (over the past few years).
I still had the 334 numbers I've accumulated over the past 10 years.
So today - after looking at apple community help sites - I took the following steps:
- Checked all contacts groups were ticked (they were)
- Tried switching the contacts box on and off.
- I deleted my newly installed Live Account as it seemed unnecessary as I could send/receive emails on my exchange account.
- I then deleted my exchange account and re-installed it.
- Hey presto, all the numbers and emails addresses which had vanished came back.
- BUT DOOM... all my initial numbers have gone. This is really bad (relatives, work mates, boss etc etc all lost).
- So then I tried to look at how to ask iCloud to sync contacts but couldn't really find an answer anywhere.
- So I tried to log into my iCloud on a public computer to check what contacts I had and move them manually but after logging on (for first time ever) using my iCloud email address and also my live.com email address, no contacts we listed as being in the Cloud.
- In terms of synching data all I could find was an instruction to turn the 'contacts' tab in icloud off (whilst keeping contacts on iphone) then switching it back on and asking it to merge.
But this didnt achieve anything new.
- So I repeated the step above and then as instructed on one post selected iCloud backup. This hasn't helped either and I'm worried that I have updated my icloud to only include my Exchange contacts and not my old numbers.
So I'm panicking that i'll never get my important numbers back! Any advice?
My only glimmer of hope is that when I changed from iphone 4 to iphone 5 earlier this year, all of my data was switched using the icloud function (but possibly my live/hotmail account too), which suggests to me that icloud does have all the numbers.
I still have the iphone4 handset too - so could perhaps get the numbers off that? But I don't know how so any advice very welcome!!
Please.

I'm not sure if this will help you or not and you may have tried it already. But, I was having problems with my 20gb ipod (same one you have) and tried everything, including taking it to a local repair shop and even considered just chucking it. Then I read in one of these posts to simply reboot my computer. So I did and guess what, it worked. I felt like such an idiot but sometimes the simplest fixes are the ones you overlook. I don't know if itunes 7 needed a reboot or if there was a problem because other users (my wife) were logged into their user accounts also, but try doing that.
I hope that does the trick for you. If not, sorry I couldn't have been any more help.

New SSD in T430, Windows not loading, tried everything...

Hi there,
I bought a T430 about a week ago. I'm not completely inept with computers: I successfully added another 4GB of RAM with no problems.
Then I wanted to replace my HDD with my SSD. I know the SSD works because it was in another laptop. I put it in an external dock; hooked it up to my T430; cleared it. I have kept the HDD as a safe backup, which I have used repeatedly since. I also made a Windows recovery disc on a CD.
I cloned the HDD onto my SSD using EaseUS software and told it to make it bootable. It didn't for me, so I blamed the software.
I then used Acronis True Image to make a bootable copy of my setup on a USB drive. I turned the computer on with just the (blank) SSD and tried to load the USB. The computer refuses to recognize the bootable copy point blank. Just brings me back to a screen asking me which drive I want to boot from repeatedly.
Alright then, I said, clone the HDD onto the SSD and then try the USB bootable. Did that, but it made no impact. Same problem as above.
Okay, let's try a fresh install on the SSD by using the recovery disc. This is when the real fun happens. I get to the Lenovo-themed System Recovery menu, and I click Next. Then I get an alert box saying "This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows." What? I only made it this morning. I don't think there has been any major updates to Windows since then! (Just in case, I made an even newer recovery disc tonight. I got the same error.)
I then cleared the SSD and tried the recovery disc on the clean SSD. Same error again. The recovery discs aren't working, the system is not recognizing the USB copy, and the cloned (and supposedly boot-ready) SSD won't boot.
What's going on? All I am trying to do is replace my HDD with my SSD, and run Windows 7. I didn't think it would be this hard
Some extra points:
- I am inserting the drives. The computer can read that it's a Samsung 840 series SSD.
- There is no problem with the USB. My desktop can read it just fine, and sees that there is 29GB of stuff there.
- I have changed the boot order in the BIOS to load the USB (or CD) drive first.
- I have disabled the secure startup option in the BIOS.
- I have tried Legacy, UEFI, mixture of both, etc etc.
- Yes, it's a legit copy of Windows. It came with the computer a week ago. There is [i]maybe[/i] an issue that I'm looking to reinstall Windows 7 onto the SSD, but the only recovery discs that come with the computer are Windows 8... but then how do I get Win 7 onto my SSD?
- I have searched the forums. None of the suggested solutions (mostly listed above) have worked.
Any help would be much appreciated, folks.
Solved!
Go to Solution.

I had one extra hiccup. The Windows 7 disc could not locate the activation/product key on the BIOS. Neither could any of the semi-questionable programs that I downloaded. So I could not authorize Windows 7.
I called Lenovo. They said it was my fault for using Windows recovery discs instead of Lenovo recovery discs. (Heaven forbid! It really should not matter. It is a terrible approach on the part of Lenovo that their initial recovery discs gave me an error about licensing, but yet they seemingly don't support the stock Windows recovery discs.) Anyway, after I told the agent - in my polite way - that this was a ridiculous scenario, she offered to send me out Lenovo recovery discs.
I accepted. They arrived today. I reinstalled Windows, and now everything is running just fine.
In case anyone in the future reads this thread: ask Lenovo to send you out Win 7 Pro recovery discs, and use them after you install the SSD. It makes the process much easier.

Devices button missing in Windows iTunes 11.1.3

There is no Devices button in iTunes in the upper right. When i plug in my iPhone, nothing happens except iTunes-wise (I get a prompt on the iPhone asking if I want to trust the computer and I click Trust and nothing happens; Windows asks me to define what should happen with the iPhone is connected and I let the prompt go away). I have done all the obvious things:
uninstalled and reinstalled iTunes
restarted the Apple Mobile Devices service and confirmed it is set up as an Automatic service
restarted Windows
unplugged the iPhone and plugged it back in
made sure my computer is authorized
In iTunes, File > Devices has no options that aren't grayed out.
Windows Explorer does show the iPhone. This seems like an iTunes issue.
Thanks for any suggestions.

I figured this out. The Apple Mobile Devices USB Driver was missing, though it was on the computer. Following the instructions to use devmgmt.msc to update the driver from the local file worked.

HT4235 I have tried everything previously suggested and I cannot get my laptop to recoginze my Apple Devices since the latest Windows 8 update!

Here is the result of my iTunes Diagnostics Report. Please HELP!
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion g6 Notebook PC
iTunes 11.1.5.5
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number (Removed)
Current user is not an administrator.
The current local date and time is 2014-05-02 12:50:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        { }
Description:            Microsoft Wi-Fi Direct Virtual Adapter #2
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 19:00:00 1969
Lease Expires:       Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:        { }
Description:            Microsoft Wi-Fi Direct Virtual Adapter
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 19:00:00 1969
Lease Expires:       Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:        { }
Description:            Realtek PCIe FE Family Controller
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 19:00:00 1969
Lease Expires:       Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:        { }
Description:            Ralink RT3290 802.11bgn Wi-Fi Adapter
IP Address:
Subnet Mask:            Default Gateway:
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Fri May 02 11:50:41 2014
Lease Expires:       Sat May 03 11:50:41 2014
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall. (This is incorrect. It is enabled).
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-05-02 12:47:06.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1
Serial Number:
iPad 2 running firmware version 7.0.4
Serial Number:
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello,
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Apple Device Drivers Missing on Windows - I've Tried Everything

Similar Messages

Maybe you are looking for