Apple device not yet started

Every time I connect my itouch to the computer it comes up with this message does any one know how to solve this because it has got me baffled. Thank you.

Go to the top of this page, click "Support" then type "apple mobile device". You should find some answers.

Similar Messages

When i connect my iphone to itune, it shown Apple Mobile Device not yet started, cannot connect my ipone and itunes, why?

when I connect my iphone to the iTunes, it said "Apple Mobile Device" service not yet activated, service cannot start?
What does it mean? I connect my iphone to iTunes everynight, only tonight this message pop out?

You can try to start the AMDS by going to task manager (ctrl/alt/delete), Choose the services tab and right click on the AMDS and choose start service. This will sometimes work, but usually iTunues needs to be reinstalled. If you reinstall iTunes, follow this KB how to article --> http://support.apple.com/kb/ht1925

Service apple device failed to start - what does this mean?

Can't download itunes on computer. Got message "Service Apple device failed to start". Verify sufficient privileges to start services. What is this?

Hello DEstadt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

RGM has not yet started

when i use scrgadm to add a resource group ,it says "RGM has not yet started".
why?
# scrgadm -a -g oracle-rg -h E4500,b150
RGM has not yet started
# ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00 /sbin/sh /etc/rc3.d/S29initrgm start
root 357 348 0 17:43:22 ? 0:00 /usr/cluster/lib/sc/rgmd
root 2111 392 0 19:00:36 pts/2 0:00 grep rgm
# scconf -p
Cluster name: sc_ora
Cluster ID: 0x3E9A1BA2
Cluster install mode: disabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.0.0
Cluster new node authentication: unix
Cluster new node list: <. - Exclude all nodes>
Cluster nodes: E4500 b150
Cluster node name: E4500
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000001
Node transport adapters: qfe0
Node transport adapter: qfe0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=qfe
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.129
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster node name: b150
Node ID: 2
Node enabled: yes
Node private hostname: clusternode2-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000002
Node transport adapters: hme0
Node transport adapter: hme0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=hme
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.130
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster transport junctions: switch1
Cluster transport junction: switch1
Junction enabled: yes
Junction type: switch
Junction port names: 1 2
Junction port: 1
Port enabled: yes
Junction port: 2
Port enabled: yes
Cluster transport cables
Endpoint Endpoint State
Transport cable: E4500:qfe0@0 switch1@1 Enabled
Transport cable: b150:hme0@0 switch1@2 Enabled
Quorum devices: d3
Quorum device name: d3
Quorum device votes: 1
Quorum device enabled: yes
Quorum device name: /dev/did/rdsk/d3s2
Quorum device hosts (enabled): E4500 b150
Quorum device hosts (disabled):
# scstat
-- Cluster Nodes --
Node name Status
Cluster node: E4500 Online
Cluster node: b150 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: E4500:qfe0 b150:hme0 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: E4500 1 1 Online
Node votes: b150 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status Owner
Device votes: /dev/did/rdsk/d3s2 1 1 Online E4500
-- Device Group Servers --
Device Group Primary Secondary
-- Device Group Status --
Device Group Status
#

# ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00:00 /sbin/sh /etc/rc3.d/S29initrgm start...this should not still be running - it shows there is some problem with the
startup of rgm
look for messages of type "INITRGM" in the /var/adm/messages log
Node transport adapters:
: qfe0each node should have at least 2 transport adapters!!!
(plus 1 public interface)

HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later.

Cisco 877w - Apple devices not able to see wired apple TV

Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
David

Hello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward.

Cache update not yet started In PI 7.1

Hi
Iu2019m using PI 7.1, facing the issue with Cache Update
Under Integration Builder -> Environment -> Cache Notifications
Central Adapter Engine, Mapping Runtime Cache (Central Adapter Engine) both are in gray color status (Cache update not yet started) .
Cache Connectivity Test in RWB
RWB -->Component Monitoring --> Cache Connectivity Test
For both Central Adapter Engine, Mapping Runtime Cache on Central Adapter Engine
Showing the warning
      "--Attempt to fetch cache data from Integration Directory not yet started or still in process"_
Please help me out to update the Cache successfully
Thanks
Vadde

Hi Sekher
Thank you very much for your time,
1 RFC- INTEGRATION_DIRECTORY_HMI is working fine.
2. I du2019t find the com.sap.aii.af.cpa.svc service in NWA ,
3 Under Config Tool
    template - Usage_Type_All_in_One - Services - com.sap.aii.af.cpa.svc
   "CacheType" has the value "DIRECTORYu201D only
Thanks
Vadde

Conversion program RFCONVTP not yet started ?

Hi all,
My requirement is to run the t-code FMZ1 , but while i am executing this transaction im getting one status messaage as " conversion program RFCONVTP not yet started". then I run that program with out test run, even though I am not able to execute the t-code FMZ1.
please tell me how can i run the program RFCONVTP.
Regards,

There are a lot of SAP notes for this BAPI, and none says "don't use it", so you should be fine. You could send a message to SAP pointing them to the unreleased status.
Thomas

1080p for Apple Devices not working in Compressor

Was happy to see the new settings for the ATV3 in Compressor, but it doesn't work. I keep getting a qucktime error -108 about a third of the way into processing. Plenty of memory is showing in Activity Monitor.
I've tried both a short and long movie, with quickcluster turned on and off, both fail.
I've tried all the suggested fixes I can find. Reinstalling Compressor, Stop/Starting/Resetting sharing, deleting preferences.
The same movies work fine with the previous Apple TV/Device settings.
Share from FCPx to ATV3 works, but it extremely slow for the longer movies, and I want to use Compressor and the quickcluster.
Is anyone else having this problem.

Some people (including me) have reported flakey changes in sharing after updating. (My issues, however, were broader than just Apple Device presets.)
If I understand your description correctly, sharing is working – just not for one preset – so it's questionable whether it's even Qmaster-related.
You've already tried the fixes I would have suggested – except you might also try Digital Rebellion's Compressor Repair.
Finally, take a look at this thread and see whether David's method works for you.
Good luck.
Russ

Help needed to upgrade to Yosemite : Apple ID not yet been used with App Store

I get this popup dialog about "This Apple ID has not yet been used with the App Store"
Clicking REVIEW does not help and restarting and re-signing in does not help with the case , I cannot get started with downloading the Yosemite OS X at all.
What seems to be the trouble?
Running 10.6.8, have already verified all the emails linked to this Apple ID.

Log into yur account and review the payment information and then log out and then go back to the iTunes store.

Fotostream - PC sync to Apple Device not working !

Hello,
i configured my FotoStream as it was written in the FAQ of apple.com.
The problem is, that Picutres or Videos i add to the folder on my Windows Computer were not synced to my apple device ( i Phone, close future also iPad*late november *).
I did all i read in forums. Deinstall all, reconfigure, use default path, set Fotostream back via icloud.com. Nothing works. It is for me an Important feature so tell me what can i do, that the Pciture in the PC Dekstop Folder get synced. The way from iPhone to PC works perfect.
i read that iOS 6 is the problem. Is that true ? Under 5 it should work ?! If it is like that, when do will be a fix released.
Thank you very much.
Regards
MM

Now ideas in the whole APPLE Support Communities ?! Come on ... -_-'

Can't sign in. Get msg that Apple Id not yet used etc. review acct. I click review and nothing happens

I can't sign in to ITunes. I have an Apple Id but I get the msg that this ID has not yet been used and to review my acct. I click review but nothing happens. Does anyone know how to get past this please?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

Apple devices, not releasing IP addresses

Hi,
We have a Cisco 4400 controller and a mix of 1010 and 1131 access points.
We have been running out of IP's on our DHCP server because the apple devices are not releasing there IP's.
If you have experienced the same problem, could you let me know how you solved the issue please?
Kind regards,
Jamie

We've run into a similar issue and we tried lowering the dhcp lease time to 1 hour and this has provided some relief so far.
Sent from Cisco Technical Support iPad App

Why are all my Apple devices not connecting to the web?

I have an Airport express and has been working fine up until recently. Now none of my Apple devices are connecting to the web. They all find the network no problem and all connect however they will not connect to the internet. The strange thing is that our Windows laptop works fine but absolutly nothing from Apple, this includes a 2011 MacBook pro, iphone 3gs, ipod touch, Apple tv and 2x 2nd gen ipads. I have reset the airport and set up a new network, it worked for one day and is back to how it was. Any advice would be great

I seem to be having a similair issue. I have an AirPort Extreme and my iMac connects fine but now my Kindle and Netflix are unable to connect to the Internet? They see my network but just can't connect to the internet?
I used to have my cable modem connected to a Vonage phone router, which then connected to my Airport. Everything worked fine then. I recently canceled my Vonage service and removed the phone router. Now my cable modem is connected directly to my Airport. Did removing the phone router casue my problem? Do I need to re-set something to get my kindle and Netflix to work again?

Apple devices not receiving IP address

Hello everyone,
I searched for a resolution to my problem but couldn't find one so hopefully I can get some help here.
We have a 2504 controller (Code 7.0.220.0) deployed with 7 LAPs. We have a few SSIDs, both with WPA/WPA2 configured. There is an external DHCP server that all clients get their IP address from. Laptops can connect to these SSIDs with no problem.
Lately tho, no APPLE devices (iphone 4, 4s, 5, ipads, etc) can get an IP address. They are all stuck in the DHCP_REQD state. I ran some debugs and I see that an APPLE device keeps getting a DHCPOFFER with an IP address but the APPLE device never accepts. Has anyone ever had this issue ?
Here is the debug of the client getting DHCP offers but never accepting:
*DHCP Socket Task: Oct 01 10:26:48.083: 3c:d0:f8:99:1b:fe DHCP setting server from OFFER (server 192.168.34.253, yiaddr 192.168.34.151)
*DHCP Socket Task: Oct 01 10:26:49.111: 3c:d0:f8:99:1b:fe DHCP received op BOOTREQUEST (1) (len 308,vlan 934, port 2, encap 0xec00)
*DHCP Socket Task: Oct 01 10:26:49.111: 3c:d0:f8:99:1b:fe DHCP dropping looped REQUEST from DS (encap type 0xec00)
*DHCP Socket Task: Oct 01 10:26:49.111: 3c:d0:f8:99:1b:fe DHCP received op BOOTREPLY (2) (len 257,vlan 934, port 2, encap 0xec00)
*DHCP Socket Task: Oct 01 10:26:49.112: 3c:d0:f8:99:1b:fe DHCP received op BOOTREPLY (2) (len 257,vlan 932, port 1, encap 0xec03)
*DHCP Socket Task: Oct 01 10:26:59.273: 3c:d0:f8:99:1b:fe DHCP received op BOOTREQUEST (1) (len 308,vlan 934, port 2, encap 0xec00)
*DHCP Socket Task: Oct 01 10:26:59.273: 3c:d0:f8:99:1b:fe DHCP dropping looped REQUEST from DS (encap type 0xec00)
*DHCP Socket Task: Oct 01 10:26:59.370: 3c:d0:f8:99:1b:fe DHCP received op BOOTREPLY (2) (len 298,vlan 932, port 1, encap 0xec03)
*DHCP Socket Task: Oct 01 10:26:59.370: 3c:d0:f8:99:1b:fe DHCP setting server from OFFER (server 192.168.34.253, yiaddr 192.168.34.153)
*DHCP Socket Task: Oct 01 10:27:00.377: 3c:d0:f8:99:1b:fe DHCP received op BOOTREQUEST (1) (len 308,vlan 934, port 2, encap 0xec00)
*DHCP Socket Task: Oct 01 10:27:00.377: 3c:d0:f8:99:1b:fe DHCP dropping looped REQUEST from DS (encap type 0xec00)
*DHCP Socket Task: Oct 01 10:27:00.377: 3c:d0:f8:99:1b:fe DHCP received op BOOTREPLY (2) (len 257,vlan 934, port 2, encap 0xec00)
I saw in another thread that disable WPA/TKIP can work, however this isn't an association issue because they association just fine, they just can get an IP address.
Any help would be great. Thanks!

Hey all,
Thanks again everyone for the help. Turns out after a lot of packet captures and pointless calls with TAC, I found the issue was a bug with the ASA firewall.
https://tools.cisco.com/bugsearch/bug/CSCuh79288
The DHCP lease time to Apple devices was 0 seconds (might be due to the fact that Apple devices request Options 119 and 252). The fix was configure "dhcprelay timeout 60" on the firewall.
Makes no sense I know but it fixed it.

Apple device not yet started

Similar Messages

Maybe you are looking for