Apple devices will no longer recognize home wireless network

After returning from a week's vacation, I am having difficulty getting my Apple devices (iPads, iPhones, MacBook Pros, etc.) to connect to our home wireless network. I have tried resetting the router and modem numerous times, restarting the devices, resetting the IP address on the MacBook Pro to no avail. At time I do show a connection to the network, however, I cannot access internet, email, etc. This problem also seems to be affecting ALL of our Apple devices, including the ones we left at home. The PC laptop connects just fine, so it does not seem to be a router issue.  Any thoughts?

Have you called the ISP's tech support line and asked for help?

Similar Messages

  • IMac will no longer find my wireless network.

    Hello, I have seen several posts for this on the net but no one seems to have a resolution. I have an iMac running OS X 10.6.3. I was not having any issues connecting to my personal WEP password protected network until just a few days ago. My computer does not list my network as an available option anymore and despite my best efforts I cannot get it to reappear. I have tried refreshing my IP address, removing preferred networks, deleting key chains and everything else I can think of. I had not changed any settings or downloaded any updates so I'm not sure why it suddenly stopped working. I have reset my router multiple times and even moved my computer so its right next to it and still nothing. Any suggestions would be great. It can find all of my neighbors networks just not mine. My roommate also runs a PC laptop and has no issues logging in.
    Please help!!

    Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

  • HT1555 I reset Apple TV using the remote app without having the physical remote control.  Now I am unable to use the menu items to reset it up without the physical remote and the Remote apps on my other Apple devices will no longer control it.  What can I

    I lost my physical remote for Apple TV and the Remote apps on all my other devices no longer control it.  What can I do?

    You need to find your old remote or buy a new one.
    AC

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Could you send reminders to another Apple device and then that Apple device will recognize it as a reminder in that Apple device?

    Could you send reminders to another Apple device and then that Apple device will recognize it as a reminder in that Apple device?

    You have to "share" the reminders. Read here:
    http://www.idownloadblog.com/2011/10/18/share-reminders-ios-5/

  • MacBook Pro will no longer recognize new SSD via USB

    I just received a brand-new 512 GB Samsung 840 Pro SSD from Newegg this morning.
    I own a 15-inch MacBook Pro (Mid-2012) with 16 GB of RAM and a 2.3 GHz Core i7 running Mavericks (10.9.1).
    Earlier today, I plugged in the SSD via a third-party USB-to-SATA adapter that I also purchased from Newegg at about the same time. The machine recognized the new drive, and I opened up Disk Utility to format the drive as Mac OS Extended (Journaled).
    Once that finished, I used Carbon Copy Cloner to clone my existing HDD to the SSD. Before it began, the program asked me to create the Recovery HD, so I enabled that option. The rest of the process proceeded smoothly. I quit CCC, ejected the drive, and put it away for the rest of the workday.
    When I arrived home tonight, I plugged the SSD back into the Mac in hopes of test-booting it externally. Unfortunately, the machine will no longer recognize that anything is plugged into the Mac. I find it highly unlikely that the USB adapter could be malfunctioning; I unboxed it this morning and it's been mere hours since the successful clone attempt. I also find it hard to believe that the SSD could be broken, either.
    I tried to disable rEFIt and manually invoke the boot selection screen, but even when that happens, the drive fails to mount. For the same reason, I can't erase the drive to start over, either. I've tried both USB ports, as well as rebooting with the SSD connected and unconnected.
    My research tells me that people often have problems trying to get SSDs to boot when they've been installed in the drive bay, but nothing I've seen suggests anyone's had a problem booting from the external SSD after a successful clone attempt. What am I missing?

    I'd start by resetting the SMC. Follow the method for "a battery you should not remove yourself."
    http://support.apple.com/kb/ht3964
    I have no experience with Samsung SSD's, but I've read a number of posts here of people having problems with some of them. That could be a possibility.
    The other thing you could try at this point is to swap the drives. If it's cloned already and the drive is good, it should boot. That would indicate the enclosure failed after the copy.

  • My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

    My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

    Does the iOS devices connect to other networks?
    Does the iOS devices see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Since both iPhone and iPod stopped connecting I suspect a problem with your network.

  • HT3180 I cant remember my password that links my apple TV to my home wireless network....what do I do?

    I cant remember my password that links my apple TV to my home wireless network....what do I do?

    1TCarlson wrote:
    I cant remember my password that links my apple TV to my home wireless network....what do I do?
    Your home network must have a wireless router somewhere in the house. All of your wireless devices use the same router password to connect to the network. That's where the password is stored and used. Log into your wireless network router and look under the wireless menu section. You should find your password there. If you have other wireless devices connected to your network maybe one of those will display the password. If your router is also password protected and you can't remember that either then your only solution is to reset the router to factory defaults and start over to rebuild your network. With security becoming more and more important these days most passwords are encrypted and not displayed in the open on any devices, including routers. It's extremely important that you remember or have the password written down somewhere and locked away for just such an occasion. Good luck.

  • I have 2 macs and 2 PC laptops in my home wireless network.  Can I use the Airport/Time Capsule hard drive to back up all 4 machines?  I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

    I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport).  I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers.  Is this possible?  Could someone help me by telling me how to configure it?  I know I will have to use different backup software in the 2 Windows 7 Laptops?  Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image?  Thanks in advance for the help

    It is your fault, pondini.. all your fault.
    I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
    I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
    I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
    A product like clonezilla, Free linux boot cd.
    http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
    Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
    My bet is that it will kill TM .. but you could be right.
    It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

  • Apple TV will no longer connect to wifi

    This may be a silly question, but I figured I'd ask anyways. My building for the last year has had an unlocked wifi that we've been using, in the last month or so it has become password protected. My iPhone will still connect to it, but my Apple TV will no longer do the same. Is there any way around this as I don't know what the password is.

    Not without the password.

  • HT4859 when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer?

    when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer? Please help me and answer either or both question detailed thanks

    Normally when you sync your device it is automatically backed up to your computer as the first step in the sync process.  When you choose to start backing up your device to iCloud, iTunes stops automatically backing it up on your computer when you sync.  That's what the message is telling your; that you are now backing up to iCloud and not to your computer each time you sync.  You can still manually back up to your computer any time you want by going to the Summary tab and clicking on Back Up Now under Manually Back Up and Restore.
    You can still sync your device as you did before, it just will no longer back up automatically when you do.

  • HP Photosmart 8250 will no longer recognize photos downloaded from Facebook. Any ideas?

    I used to download and print photos from Facebook, but the HP Photosmart 8250 will no longer recognize these files on the SD card.  I believe Facebook recently updated it's photo format (incidentally, older images on Facebook still work fine).  Any ideas?
    I'm running Windows XP, and have not changed anything on my setup.

    The troubleshooting steps in this document may help resolve the issue of black not printing.  If not see the post here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT4352 My apple tv will no longer load movies.

    My apple tv will no longer load movies that I have in iTunes. It shows them in the menu, but when I click on them I just get the spinning wheel. Music works fine. Every thing worked fine the day before.

    Power cycle the ATV.
    Close and relaunch iTunes on the computer or simply reboot the computer.

  • Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

    Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

    If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
    https://app.box.com/s/fe7v7h7kywjr23spumqp

  • HT4436 If I deleted the existing Apple ID to use iCloud, will it delete that backup or the other Apple devices will still be supported by icloud on the old Apple ID

    If I deleted the existing Apple ID to use iCloud, will it delete that backup supported by the old Apple ID or the other Apple devices will still be supported by icloud on the old Apple ID ?

    Is this itunes on the iPad or on my computer? Thank you for the reply.

Maybe you are looking for

  • Is it possible to upgrade/add a graphics card to a Hp Envy dv7 dv7-7243cl laptop

    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Envy dv7 dv7-7243c laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card. Mostly I've come acro

  • Smartforms of purchase order in ecc 6.0

    Hi there, In a PO we have pricing condition(me23n). I need to print those pricing conditions as per each and every PO number. For this i have to check two things as per my reqirement, 1- whether it is active or inactive 2- the amount of that particul

  • Indesign library drag drop looses xml attributes of Table tag

    Hi all,      I have created a Table with 1 row and 3 coloumns, I have text in all 3 cells. I have attaced xml tags to cell text and after that I have added attibutes to Story tag, Table tag and Text tag.  I have drag this table frame to Indesign libr

  • PO updation after GR

    Dear Expert we want to update the conditions of PO ,  after the reversal of  GR  but System is not allowing any changes in the Condition of the PO .Is it a standard SAP behaviour then if so then must be some sap notes on the same , please provide the

  • Polar chart type: show different values

    Hello, I have a polar chart type it would be work pretty good but I have a question. For the chart type I created a query and the result looks so: <b>Region</b>  <b> real Value   calValue</b> EMEA                 -5%                 95 LATIN