Apple doesn't take responsability for the 3G upgrades. I can't work with it
I updated my iPhone 3G like most of the people having an iPhone 3G, but now it runs very very slowly. I use it at work, but now it's impossible. I called Apple, and the said me it was out of guarantee. Nothing to do. So they "broke" my phone and I cannot go back. Is this legal? When they launched the upgrade it was 3G compatible, but it isn't. I am really disapointed with Apple.
I tried everything to get my iPhone 3G up to speed. First the double hard reset, the the system restore, then the restore as new device. These all made the iPhone work better for a short while and then it would start to slow down again.
Finally I went to Settings, General, Home Button Spotlight Search and unchecked all selections except Contacts, Applications, and Music.
My IPhone works great agin.
IPhone 3G iOS 4 None
Similar Messages
-
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
I Changed my Apple ID and PW they work fine. But the old Apple ID keeps popping up asking for a PW, how can I get rid of the pop up request Or the old Apple ID? This only happens on the iPad.
Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.
-
Is there a driver for the l80 faxphone printer that will work with Vista home edition
Same as subject
Solved!
Go to Solution.Hi RayBlack.
There is a driver available for the 32-bit version of Windows Vista, however, the L80 does not support printing on the 64-bit version of the Windows operating system. You can download the driver by clicking on the link below:
FAXPHONE L80 - Drivers and Software
Click the drop-down arrow for [Drivers] and then select the fax printer driver. Select "I Agree - Begin Download" to download the driver.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
without making any changes myself, all of a sudden the icons on my apple tv got to big for the screen. I can't even see all the letters when I go to search. I have a 42" tv and have tv ratio on 16:9. any solutions?
Check resolution via Apple TV settings. You will also need to check your HDTV settings
-
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix. Any ideas. I have unplugged everything and waited but nothing helped.
Update software. If that doesn't work try resetting. Mine started working after the update.
-
While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?
Same here. I just posted a question too.
-
I have an iPad 1 and would like to buy the new iPad. Will Apple exchange my old iPad for the new one . I live in Saudi Arabia.
Apple does not take trade-ins. You'll have to look for a dealer that does, though you'll probably get more for the iPad 1 if you sell it yourself.
Regards. -
Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Does apple recommend a screen protector for the iPad 4?
Does Apple recommend a screen protector for the iPad with a retina screen?
Apple's recommendations are usually hardware and software related. How to charge the battery, the benefits of backing up, transferring purchases, and things like that.
I have never seen Apple officially recommend any third party accessory and I doubt that they ever will do so. Using a screen protector is up to the individual. I have always used a screen protector of some type on all of my iDevices. I have somewhat oily skin and I would rather trash and have to clean a screen protector than have to keep up with cleaning the glass.
I have an iPad 3 and I have it encased in an OtterBox Defender case with a built in screen protector. My iPad 3 is in pristine condition - screen and back. My OtterBox Defender has taken quite a beating however, and I prefer that the case take the abuse and not the iPad! -
Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ? -
Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.
Where are you physically located?
What country's Store are you using?
The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
Has the ID(s) worked before for purchases for this country's store? -
I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple deviceRecovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?
credit card it tells me my credit card is not valid for the store.
Hi Don ...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
And check out this support article here > iTunes Store: My credit card's security code or zip code does not match my bank's records
Maybe you are looking for
-
Query produces duplicate values in successive rows. Can I null them out?
I've had very good success (Thanks Andy) in getting detailed responses to my posted questions, and I'm wondering whether there is a way in a report region join query that produces successive rows with duplicate values that I can suppress(replace) the
-
Printing only first page landscape not portrait
Acrobat Standard for Windows v.8 When using Acrobat to print any PDF document, the first page is printed in landscape instead of portrait, the rest of the pages print as expected. This is reproduceable behavior on a single machine. Printing the PDF u
-
How to display the content of a region on a different page
Hello, Does anyone knows how to display the content of a region on an other page. I try to make page that displays content that resides somewhere else in my portal, so I can give a summarization of some hot topics. I really want to display the whole
-
User cannot see workbook assigned to his Role
Hi, One of my users have a role (Z_T1_USER - T1 User) assinged to them in the backend. I have created a workbook and saved it under this role under Roles Menu in RSECADMIN - Role Maintenance and there is a green light for Menu. The workbook executes
-
Is anyone working with large datasets ( 200M) in LabVIEW?
I am working with external Bioinformatics databasesa and find the datasets to be quite large (2 files easily come out at 50M or more). Is anyone working with large datasets like these? What is your experience with performance?