Apple DVD Player not recognizing external speakers

I have connected a pair of Logitech V20 notebook speakers to my MacBook Pro. I adjusted the System Preference settings/Sound/Sound Effects - play sound effects through "Logitech USB Speaker" and that works fine. I can hear my laptop's beeps through the external speakers.
But when I put in a movie DVD and the Apple DVD Player boots up, the sound does not come through the external speakers. So, in the DVD Player, I selected Preferences/Disc Setup/Audio/Audio Output and the external speakers are not there - only "System Sound Output" with nothing else available/recognized.
So, how do I get the DVD Player to put the sound out through my external speakers and not the laptop internal speakers?

"System Sound Output" at DVDPlayer's preferences is just fine - it refers to the output that has been selected at System Preferences - Sound
No sound from USB speakers when booting is o.k., too: At this point those drivers that are needed haven't loaded yet.

Similar Messages

Apple DVD player not working on Mid 2011 iMac running 10.7.2

I have a 21.5-inch, Mid 2011 iMac which came with Lion preinstalled. When I insert a DVD, Apple's DVD player comes up with the following error:
"A valid video device could not be found for playback. [-70017]"
The DVD player works. I can play DVDs using VLC, and I can use it to burn in iDVD, but Apple's own DVD player simply will not recognize it. I hoped this problem might be solved when I upgraded to 10.7.2, but alas it has not.
Does anyone know how to fix or work around this issue? This computer is used daily for my media-heavy job, so leaving it somewhere for service is not really feasible unless I'm completely unable to work on it.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch the player and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

DVD player not recognized

I have a Plextor PX712UF dvd external. I have in plugged into a usb port and the device is on. When I check system preferences, it is not recognized. Any ideas

Did you check the System Preferences or System Profiler. If you did not check System Profiler do it now and hopefully it'll appear under USB. if it doesn't, try power cycling everything, otherwise, try a different USB port.
If you Plextor bus-powered or A/C powered?

DVD Player not recognized by computer

Have Split x2 Windows 8.1. Have loaded software for LG Super Multi Blade DVD player. No autoplay. Works on another computer.
This question was solved.
View Solution.

Hello Arnoldj,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with your Optical drive not autoplaying you discs in Windows 8.1. Although this is not a Windows 8.1, but a Windows 8 document the steps will be the same and I believe is where we should start. Please review the HP Support document: HP PCs - Drive Cannot Read Discs (Windows 8), which should address the issue you are having.
If you still require additional support please feel free to re-post. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

DVD player not recognized suddenly

Premiere 2 does not recognize the dvd player that I am using w/o a problem for many years. Who can help?? Thanks
Andy

Does Windows Explorer aka File Manager still "see" the DVD drive?
If yes, what other software have you installed?
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941

DVD Player not recognized by iDVD '08?

I made a slideshow in iDVD and tried to burn it onto a DVD.
iDVD informed me that my Intel iMac did NOT have a 'Superdrive' and could therefore not burn it.
Strange: this Intel iMac does indeed have a DVD-burning 'Superdrive'.
What gives?

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.
Can you create a disk image?

Apple DVD Player software not reading SPRM 4 correctly.

I am a DVD author and have recently run into an issue with Apple DVD Player not reading SPRM 4 (current title) correctly. I know this isn't the Apple DVD Player forum, but there doesn't seem to be one for that application, so here I am...
I have a disc (not authored in a Mac environment) that uses the value of SPRM 4 to track the last title played, and if it happens to equal the value of the main feature title, then use the "PLAY" button on the main menu as a resume.
Apple DVD Player seems to think that SPRM 4 equals this particular value all the time, regardless of what title last played, which is totally breaking my disc. The real kicker is that the disc works flawlessly on set-tops and in a windows environment.. just not on any Mac that I have tried.
Has anyone out there also experienced a problem with tracking SPRM 4 in Apple DVD Player? Is anyone from Apple reading these things, possibly someone who can flag this as a major issue?
I am positive that this specific to Apple DVD Player, because the disc works as intended EVERYWHERE else.
I have tried and experienced this issue across several Macs, and across several versions of DVD Player. It's consistent across all.
If anyone has any ideas, please respond.
Thanks,
Ben

these problems are well documented, use the search functions for plenty of solutions

Apple dvd player / external dvd drive issue

i recently bought a LaCie d2 external dvd drive, since my desktop g4 only has an internal cdr drive. I am running osx 10.4.3, which i installed through this dvd drive. yet now, when i put a DVD movie into the drive and try to open Apple DVD Player, it says
"There was an initialization error. A valid DVD drive could not be found. [-70012]"
i know this is a third party drive, but can anyone help me out? pleeeease?

This is to be expected. DVD Player will only work
with an external DVD drive if the Mac has an internal
DVD drive.
However you may overcome this limitation using PlayerPatc
h.
I had the same problem as above (error code [-70012])... I downloaded this patch for my LG external DVD/RW Model GSA-2166D and it worked perfectly... can now play DVDs...
It's people like you who make being part of the mac community a joy!
Now I just need to find a patch to get the Light Scribe to work...
Thanks!
A1005 Mac OS X (10.3.9) M8758LL/A

Menu buttons not working in Apple DVD Player

I am having a real problem. I have a menu with three buttons. The default button takes you either of the other buttons (depending on whether you press right or down on the remote). These two buttons are auto-action and proceed imediately to other tracks. This works perfectly in home DVD players and in the Apple DVD Player using the "remote". Howver, if I try clicking the buttons using a mouse on the Apple DVD Player window, they DO NOT work! I have buttns over video on the same disc and these work perfectly by clicing on them with the mouse. Has anyone else had a problem like this and if so, have you found a solution? Many thanks!

Is the one that doesn't work a layered menu? DVD Player does not work correctly with layered menus, it takes one click to switch to the selected state, and a second click to activate the button.

Scripts works in Simulator and Apple DVD player but not on TV

I have a basic project with two different tracks.
The first one is video and audio. Plays "as is".
The second has video, two audio and one subtitle. Depending on which button, the second Track should be played with different audio and with/without subtitles.
(I use GPRM 1 to set the subs stream, GPRM 2 for the audio and GPRM 3 for menu button navigation).
On the second Track I have a pre-script that sets the streams depending on the value of GPRM 1 and 2.
Works fine in Simulator and in Apple DVD player, but not on the stand-alone player.
Any idea what might be the issue here?
in short:
Button 1: Play Track 1 "as is" (audio 1, no subs)
Button 2: Play Track 2, audio 1, subs on
Button 3: Play Track 2, audio 2, subs off
Button 4: Play Track 2, "as is" (audio 1, subs off)
Menu button and End Jump should go to the corresponding menu button.
Many thanks for your help.

It is part personal preference, part artistic, part what makes the user experience the best so there may not be one "right" answer and I have often made menus one way than changed them when viewing the DVD for something that seemed to work better.
Looking at you description I started playing with some ideas in my head and started typing them, then changed what I was writing
It sounds like you want chapter selections for both track 1 and track 2? If so it may make sense to have the initial menu have Track 1 and Track 2 buttons which then link to sub menus where there is "Play All," selections for each section of each movie and one last button for the preferences.
Alternatively you could also place the preferences selection button on the main menu, though since Track 1 does not sound like it really has preferences you need to make sure that users do not become confused and think they have turned something on/off and are not seeing these options when they thought they selected them when they play back Track 1.
Also with 6 to 8 chapter markers you may be getting close to the point where scripting could make it easier if your selections are just to play the sections - in other words for track 2 four stories take care of the combinations Audio 1/Sub Off, Audio 1 Subs On, Audio 2 Subs Off, Audio 2 Sub On. If the chapter selection starts the track a scene then plays through you can target chapter markers in the story so 4 stories takes care of it. If you are just playing sections you would need 4 x 6 or 8 chapters - 24 or 32 stories roughly. But it is actually fairly quick to do - just set up the intial Play All with all subtitles and audio selections unchecked except for "1" then copy from there. Probably should take under 10-15 minutes or so
Put a real quick thing together for a quick view of the tracks. I can flesh it out more if you like.
http://www.dvdstepbystep.com/081107Sub.dmg
The main menu will be the title menu, then the sub-menus (including the set up menus) can be placed in the same VTS as the applicable tracks which can help a bit with DVD performance speed. Since there is 6 to 8 chapter markers on a track each of the main sub-menus would have 8-10 buttons which can work in the design.

First Play "Not Permitted" on Apple DVD player

I have some duplicated DVD-Rs of a project, and the client ha reported a disutrbing error. I've been told that on several different Macs running OS 10.2 - 10.4, not only does the disc not auto launch DVD player and not auto-play the first play menu, but when the user presses play on the floating control, they get a "Not Permitted" message. The user reported that they were able to choose "open Video_TS" and navigate to the VIDEO_TS folder on the disc, at which point they were able to get the disc to play.
The disc include a significant amount of content on the ROM sector of the disc, including an autorun and an .exe file for windows users. However, I can't see how the presence of these ROM files could interfere with the operation of DVD Player and the VIDEO_TS folder on the disc.
Furthermore, the duplication master for this disc has been formatted directly from DVD studio as a standrd DVD volume - no Toast burn, hybrid volume formatting, anything like that.
Upon inspection I discovered that my authoring assistant had specified a pre-script on the first play menu. I try never to use pre-scripts for anything, as I have found the way DVD studio handles them to be unreliable. However, I suspect this pre-script on the first play menu as the culprit in this problematic behavior, and have removed it.
The problem consists in that I did not experience this problem with any of the DVD-R checkdiscs I burned from DVD studio, unti the discs were duplicated. We'll be doing a full-scale replication run as the next step. Since I am not able to reproduce this problem on discs I burn here, I'd like find a way to know I have fixed the problem.
My question is, has anyone else ever encountered issues with their first-play menu throwing up this "not permitted" condition in Apple DVD Player? Has anyone ever found a connection between this issue and pre-scripts, or between this issue and any ROM files?
I suspect that DVD studio's pre-scripts are "simulated" or translated through the abstratction layer of DVD studio in a way that allows them to be outside the DVD spec, or perhaps there are other ways DVD studio might be using the pre-command on a menu, such as when you specify a button selection for a menu, that use the menu pre-command, and override the pre-script you might have spcified for the menu.

I've seen it on replicated masters when a dvd-r master was used and not all regions were selected as ok to play. DSP doesn't 'check' region 7 by default... its best to use a region all project and .img files, not VIDEO_TS builds to the HD.
How were the discs duplicated though? That is probably the cause of the problem, not the pre-Script. Maybe a 'Data' disc was burnt and not a DVD-Video type option...
-jake

HT4108 Can I connect my external apple DVD player to play movies on my ipad 3?

Can I connect my external apple DVD player to play movies on my ipad 3?

I am afraid you cannot connect the external DVD player to the iPad. It won't work.

Apple DVD Player will not launch

I have a B/W G3 Tower/Desktop as well as a G3 PowerBook (black laptop). Both run OS 9.2.2, QT 5.0.2, and Apple DVD Player v1.2.
When I try to launch the DVD Player on the tower, I receive the following on a pop-up window:
"Apple DVD Player cannot open because it cannot find the required hardware. Try reinstalling Apple DVD Player. (204)"
The following pops up when I try to launch the DVD Player on the G3 PowerBook laptop:
"Apple DVD Player cannot open because the required hardware was not found. If you have another application open that uses sound or video, quit that application and open Apple DVD Player again. If you are using a PowerBook that requires a DVD-Video PC Card, make sure the PC card is properly installed in the appropriate slot. (21)"
Both used to work but for some reason have abruptly stopped. I'm going crazy trying to figure it out. Speech is turned off and I don't have any other video or DVD apps open.
Any help would be greatly appreciated.
Thanks,
Dave
Black and White G3 Tower/Desktop Mac OS 9.2.x

you may need to reinstall your operating system because it sounds like you dvd rom driver is damaged but there is a way around this to
go to google and search for a program called patch burn this application will reinstall a fress driver for your cd dvd rom drive but unknown if this will even work because if the file is currupted you may end up locking out the cd drive driver and your cd drive will stop working in os x and you will need to reinstall the operating system
but try patch burn first

APPLE DVD PLAYER 5.0 HD PLAYBACK NOT SUPPORTED IN LEOPARD!

Using TIGER I have been able to play the HDDVD containing the HVDVD_TS folders created with DVD Studio PRO 4, using the Apple DVD player, either from the hard drive (Open DVD Media) or from a DVD recorded by DVDSP4.
I am very dissapointed with LEOPARD because the HD feature of the Apple DVD player is not supported and missing from the preferences of the player.
What is the problem?. Is Apple turning its back on its HD customers?. I thought by now, we would not only be able to play our home made HD DVD's, but also the commercial discs with the new player and operating system. Apple has always been at the forefront of home video editing. I want to be able to preserve my HD footage as HD on optical media to play on all HD players. It is embarrassing that Windows already has software to record and play HD and Blu-ray commercial discs, but Apple does NOT!!
I tried using the older Tiger DVD player (version 4.6.5) with Leopard, but the HD support is still missing.
PLEASE HELP ME RESTORE THIS FEATURE TO THE APPLE DVD PLAYER WHICH IS EXTREMELY IMPORTANT OR MY HOME VIDEO EDITING AND BURNING!!!

The HD tab in my player preferences dissappeared when I upgraded to Leopard. The supported features under the HELP menu of the new DVD player displays "HD UNSUPPORTED". This changed when I upgraded to Leopard. I am still running Tiger on my wife's Imac Intel and the HD is supported. I copied the OLD DVD player from her computer unto my hard drive and the HD tab is missing and HD is unsupported. I am assuming it is a problem in Leopard in my iMac G5. I know that HD is supported on the iMac G5's as stated in the help MENU, and I had been using it all along. I don't know where to go for help on this. Can you guide me?
Thanks

Invisible Auto Action Buttons not clickable in Apple DVD player

I've put some Easter Eggs in my menus which are invisible and auto-action.
In simulator, you can access them with the controller by pressing a particular arrow button from a particular selected menu item. They are also accessible by clicking directly on them with the mouse.
But in Apple DVD player they are only accessible with the controller; clicking on them with the mouse doesn't work.
Is this just a limitation of Apple DVD player?

If you've set them to be Invisible why would you expect them to be clickable. The whole point surely is that they are Invisible.
Message was edited by: Steve Kirkham

Apple DVD Player not recognizing external speakers

Similar Messages

Maybe you are looking for