Apple DVI to ADC Adapter with new mini

Has anyone have any experience using the Apple $99 DVI to ADC Adapter
with a New ( or old ) Mac Mini... I have a 22 inch Apple Cinema and
I love it... especially the non-glare screen.
The only complaints I've heard were the ADC Adapter size was large and it gets hot.
Anything else???? Does the sleep feature work?
Thanks in advance, Tom

Tom,
I currently use Apple's $99.00 DVI to ADC adapter with pre 2009 Mac Mini and Apple 17" ADC Studio monitor.
This setup in use for approx. 2 years now and to date no problems observed.
The unit's dimensions are approx. 4" x 4" x 1.5".
In use from 9:00 am this morning, in use as I type, I place my hand on unit now. The unit is warm to the touch. I can leave my hand on unit for 15-20-30 minutes. Certainly not HOT.
I have had sleep/wake problems with both mini and monitor in the past. I cant say that these issues are related to or caused by the dvi/adc adapter. I have no current sleep/wake problems.
UPS/System preference settings can also affect sleep/wake options.
Sleep feature works as the unit is also connected via usb to the machine.
Regards,
TrevorB

Similar Messages

  • Apple DVI to ADC Adapter - DID NOT WORK !!!!

    I have a PowerMac G4 Model M5183 and I wanted to connect it to a 20" Apple Cinema Display that I got.
    Because the display output on the computer is different than the monitor, I bought the Apple DVI to ADC Adapter that everyone talks about on the support pages.
    Problem is, that the start button on the monitor, will not start the computer. And if I start the computer with the ON/OFF button on it, the monitor comes on after a few seconds, the "Apple" appears and the wheel starts spinning....but the monitor goes black after about 25 seconds. I hooked comp. to a Viewsonic via the DVI port and the computer works fine. I hooked the monitor to a G4 with the ADC port and the monitor works fine. AND, I took the first Apple DVI to ADC Adapter back to the store, thinking it was bad...second one didn't change anything.
    HELP!!!!!

    Computer will not start with button on display.
    When you use the power button on the display, the start signal is transmitted via the USB bus to the computer. The DVI interface on the computer does not have the required USB signals to start the computer. If that is a requirement, you need a graphics card with ADC connector, which requires a computer with the 25 Volt power supply.
    ... the monitor goes black after about 25 seconds.
    That is about the time the System uses the stored Display Preference to re-initialize the display. It may mean the stored Display Resolution Preference has the wrong values for this display to sync up. You can start up from another source and attempt to delete the preference file, or start up using another monitor and set the screen resolution to something really simple, like 640 by 480.
    Your Mac cannot query the display about its capabilities, because its usual method, across the built-in USB connection, is not available. So it must use the stored value instead.

  • Can I use the "Apple DVI to Video Adapter" with the GeForce 8600M GT?

    It's all in the subject, folks. I've got an nVidia card, not ATI. Should I go ahead and buy the Apple DVI to Video Adapter to connect my MacBook Pro to my CRT Sony TV?
    Thanks.
    PS My May 2005 Powerbook G4 had both a DVI and sVideo connector. I used to use the latter to connect to view on the TV. Now, my Powerbook is dead...

    The first review posting on the product page is:
    +dosen't work on mac pro with nvidia!!!!!+
    +Written by PH from hamburg+
    +August 27, 2007+
    Which suggests no. I have heard from an Apple Store "genius" that it does.
    Both are n=1, so I'd suggest a call to the Apple Store sales line (even if you don't order it that way).

  • Cinema Display to be used with DVI to ADC Adapter

    Hello everyone,
    I have a 22-inch Apple Cinema Display (clear enclosure) connected to my Mac mini (Mid 2011) through Apple DVI to ADC Adapter.
    So far, this configuration has allowed me to get beautiful OS X desktop displayed on my old Cinema Display, though it wasn't perfect.
    Pressing the display's power button does not turn off the display nor put my Mac to sleep. Instead, holding the button just makes the power LED brighter than usual.
    Two USB ports on the back of the display doesn't seem to work. It does charge my iPod, but any device connected to those ports (including iPod) won't be recognized on my Mac.
    Can anybody see what's going on here and help me troubleshoot the issue?
    Thanks.

    Pressing the display's power button does not turn off the display nor put my Mac to sleep. Instead, holding the button just makes the power LED brighter than usual.
    That's normal with the DVI to ADC adapter.  ADC (Apple Display Connector) has pins for power control but there are no such pins in DVI so the display's power button has no way to control the computer.  I don't know why the power light brightens when pushed, but mine does it too.
    Two USB ports on the back of the display doesn't seem to work. It does charge my iPod, but any device connected to those ports (including iPod) won't be recognized on my Mac.
    Is the adapter's USB cable plugged into the computer?  The displays ports are USB 1.1.  Some devices, such as iPhones, require USB 2.0.
    Failure of the USB circuitry is common with those displays.  My 22" ADC display started having USB problems years ago.  It started with intermittent USB port problems, then it started interfering with computer sleep.  Since I now use the display with a DVI to ADC adapter I don't connect the adapter's USB cable (and don't use the display's USB ports), so don't have any computer sleep problems.

  • DVI to ADC adapter doesn't work

    Greetings folks,
    I have an Apple DVI to ADC adapter going to a Formac 17" ADC display or alternatively an Apple 17" LCD ADC display. The displays do not function with either my MacBook Pro or my MacBook. I can't figure out which the Macs are having a problem with, the displays or the adapter. It all works fine with my PowerBook G4 and both of my PowerMac G4's. Also, regular DVI and VGA displays work fine with the MacBook Pro and the MacBook.
    I have talked with tech support and they have not been able to find a solution. I will bring the adapter to my Apple store to see if they can determine the problem.

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • DVI to ADC adapter

    This one is a little tricky...i have a 20" Apple Display with an ADC connection.....my friend who owns an older G4 believeed to have a DVI-D and VGA connection wants to buy it but we're wondering if there is any way to hook it up.....I have an Apple DVI to ADC adapter but I don't know if it works for just DVI-I or what...he lives a few hours away so we can't just try it out....if anybody knows anything please let me know.
    thanks.
    JP

    Ok, here is what I know about the computer...
    G4 400mhz PowerPC
    GRAPHICS CARD:
    ATY,Rage128Pro
    Chipset Model: ATY,Rage128Pro
    Type: Display
    Bus: AGP
    Slot: SLOT-A
    VRAM (Total): 16 MB
    Vendor: ATI (0x1002)
    Device ID: 0x5046
    Revision ID: 0x0000
    ROM Revision: 113-63001-108
    Displays:
    900U:
    Resolution: 1152 x 870 @ 75 Hz
    Depth: 32-bit Color
    Core Image: Not Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Not Supported

  • DVI to ADC adapter STudio display will not power on when used with Mac mini

    I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
    Mac mini   Mac OS X (10.4.1)  

    Hi
    unfortunately I think the Apple store have sold you the wrong item.
    I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
    Confusingly Apple did a 17" Studio display both as a CRT and LCD.
    Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
    Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

  • Nothing simpler, smaller, less expensive than Apple's DVI to ADC adapter?

    My 2001 vintage 466 MHz PowerMac G4 with 15" Studio Display has served me well over the years. But, alas, she's running Panther (10.3.9) and lacks the requirements to move on to Leopard, which I'm ready to do. So, I decided to upgrade the machine. Since the other parts of the system (monitor, keyboard, mouse & printer) were just fine, I decided that a new Mac Mini would fit the bill nicely. (I'm also a Scotsman, always looking for ways to save money. Perhaps that's part of the problem. )
    I received it yesterday and wasn't expecting the ADC-monitor to DVI-computer dilemma. (Which shows you just how out of touch I am with technology's incessant march forward.) So, I investigate solutions.
    Imagine my surprise when I discover that the only solution out there is by Apple, in the form of a brick almost as big as my Mini! And, another $100 to boot! I did find a third party solution through a link on Apple's website, but that's $150! (Thanks for the referral, Apple!) My mind is boggled - there must be other available solutions but, if there are, they are evading me.
    Does anyone know of any solution that is simpler, smaller and less expensive than Apple's DVI to ADC adapter?
    Thanks for any and all info.

    The Apple adapter is the only solution if you really want to keep that display. It might be a good time to look for a larger display, with DVI.
    I am using the Apple adapter with my seven year old 22" display, but I wouldn't want to run OS X on anything smaller.

  • Mac Mini and DVI to ADC adapter

    I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • Apple DVI to Video adapter + Mini DVI to DVI adapter pins not same

    I just purchased an Apple DVI to Video adaptor so I could plug in a Mac mini to an older tv, however the pin arrangement on the Apple DVI to Video adapter is not the same as the pin arrangement on the Mini DVI to DVI adapter that came with the Mac mini.
    Anyone have any idea what adapter I can use to make this connection?

    Joseph Kriz wrote:
    James,
    I'm confused here.
    Which Mini do you have?
    I know you posted this in the 2009 Mac Mini section so your Mini should have 2 video out ports.
    1. Mini DVI
    2. Mini DisplayPort
    If that is true, then there is no way you could have connected the DVI to Video adapter in your first post as the new Mini does not have a DVI port.
    The new Mini's come with 1 adapter.
    Mini DVI to DVI adapter.
    I don't know of any Apple adapters that will output to S Video, component or composite connections on the new Mini's.
    The one that osxdude shows above will not work on a new Mini. It say nothing about a Mini in their description:
    *The Mini-DVI to Video adapter is designed for the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4, allowing you to connect to most S-video or Composite enabled devices.*
    Good Luck and let us know what you find.
    Yes, I have a late 2009 Mac mini. It came with the mini DVI to DVI adapter as you stated. I need to hook up to an older tv with yellow component video port. Not knowing any better, and looking online, it looked like the male DVI end of the “Apple DVI to video” adapter would connect to the female DVI end of the “Mini DVI to DVI” adapter that came with the Mac mini. I figured that since they were both DVI plugs, male and female, they would connect, but the “Apple DVI to video” adapter has 4 extra pins, so they won’t.
    Then, following osxdude’s lead, I went to a local independent Apple store, and they told me that the same adapter that osxdude suggested would work, so I bought that (at an inflated price), but as you stated, it does not work. Also, as you stated, the Apple site does not list the Mac mini as being used with this adapter, which is why I did not originally purchase it online. It was only at the insistence of the independent Apple store that it would work that I purchased it. Unfortunately, once the package is opened
    the store were I purchased it will not take it back. Boy... this is getting expensive, and confusing! Why so many adapters?
    After much searching I found this info: http://forums.macrumors.com/showthread.php?t=706736&highlight=monoprice so I’m going to try that.
    Once it’s all said and done, I guess I’ll be listing a few adapters on ebay!

  • Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

    Hi,
    I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
    If yes, should I get any specific DVI-to-HDMI adapter?
    If yes, will it have sound with it?
    Thanks.

    So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC?  I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down).   Is this a bad adapter or the result of "stacking" adapters?  I have read that it is more common to a bad adapter result.
    Thanks.

  • I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

    I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it  and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
    The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
    This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • Mac Mini - DVI to ADC Adapter - Cinema HD 23" ADC anybody?

    I would like to buy a Mac Mini, but I'm not sure if it will handle an old Cinema HD 23" ADC through a DVI to ADC adapter. Anybody has this configuration? Which is the maximum resolution possible?

    Hi
    unfortunately I think the Apple store have sold you the wrong item.
    I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
    Confusingly Apple did a 17" Studio display both as a CRT and LCD.
    Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
    Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

  • DVI to ADC Adapter + Mini DVI to DVI Adapter = usb ports don't work?

    I have a 23" Cinema with the ADC plug. I've been using it with the DVI to ADC adapter for many years, though I did not use any of the monitor's usb ports during this time. I recently bought a new Macbook, so now I have am combining a Mini DVI to DVI adapter with the DVI to ADC adapter. The display works fine, but now I find the usb ports on the monitor do not work. I've checked all the pins involved and they are all straight and look normal.
    Does this have anything to do with the double adapter situation, or could it just be that the monitor's usb ports are aging and haven't been used in a long time? Or is it possible these ports do not support usb 2.0 devices?

    Thank you Malcolm.
    It's true I cannot adjust the display's brightness using the buttons on the monitor. But I can put the Macbook to sleep, both when the adapter's usb cable is plugged in and when it's not.
    So if the usb circuitry has gone bad, will this cause me any other problems, or can I just ignore it? Right now I am trying to choose an external hard drive to buy, so I'm taking stock of my available ports. I don't think I'd put a big hard drive on a usb 1.1 port anyways.

  • Apple Mini-DVI to Video Adapter and Mac mini (2009)

    Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
    http://store.apple.com/ca/product/M9319G/A
    works with the latest Mac mini (early 2009)?
    If it does not what other solutions are there to connect to composite, component or s-video?

    KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
    10-May-2009
    I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

Maybe you are looking for