'Apple External Optical Drive' stopped working

I'm trying to install Windows XP on a Macbook Air. I successfully installed the OS using the USB Superdive. I then inserted my Leopard disk and installed Bootcamp 3.0. After the reboot I can no longer use the external drive. When I look in device manager the show that USB device as in error. I have tried reboots, un-installing the device, scanning for hardware changes, etc.
Does any one have a clue how to get the external drive working again within Windows XP on my bootcamp installation?

The error code was 10 as I recall. I'll look again in a minute (re-install boot camp) what I did find was if I uninstalled the Apple 'ODD' driver from the system the drive was immediately available again and worked fine. I was even able to eject the disc. However, I can't insert a new dis in that state. When you try to push the new one in the drive is in a state where it is still 'pushing out' and wont take it. If I reboot I can then use another disc, but again once ejected I can't use it.
I can get my software installed this way I guess, with lots of reboots. But with Apple's driver in place it does not work at all.
Once I get a few programs installed I'll re-apple Apple's driver and see what I end up with.

Similar Messages

  • Apple external optical drive not working on macbookpro

    I removed my optical drive from my 2011 2.3, macbookpro 13" and added a 2nd hard drive. I have an apple external optical drive(cd/dvd) which I hooked up
    via usb and it would not work. I connected the apple external optical drive to my two other mac mini's and it works on both of them. Any reason why the external optical drive would not work on a macbookpro? If anyone has suggestions I would be most greatfull. Thank you in advance.

    Click here and follow the instructions.
    (77810)

  • External optical drive that works?

    Hi,  I have had an Imac 27 i5, its 3 weeks old now, I did the free Lion os upgrade before realising that Lion seems to be buggy.
    I have had problems some of which I have got over thanks to this forum, some I have not  I still cant get my isp set-up working but a work-around is giving me service, the wireless connection drops out regularly but using ethernet works. Mail wont send my emails and Itunes is problematic.   The bluetooth trackpad, mouse and keyboard disconnects frequently but thankfully reconnects soon after. Neither of my two existing external hard drives or my external optical drive would work on this Imac,  I replaced one hard drive and that works now,  but tells me that I have 120gb free on a drive that is only 120gb and has a full Time machine backup on it?). I replaced the optical drive with a very cheap one and that works now.
    My old optical drive used Llitescribe and I really want to carry on using it with the Imac,  Can any of you guys recommend an optical drive with Litescribe that will work with the Imac and os Lion?  I am getting tired of having to spend out money replacing things I expected to work with the Mac and dont!
    I brought the Imac because I wanted a hassle free computer, I read and took in all the reasons for using Mac over Microsoft and to be hounest with you the Last 3 weeks have nearly driven me to send the Imac back!   I expected it to "just work"  and be easier to use but it has not turned out that way for me up to now,  I have contacted Apple about the problems and they dont seem to be of very much help - up to now, but thanks to you guys and this forum I am getting things sorted, slowly.  Apple need to get thier act together I think!  What hurts the most is that my 3 year old £600.00. HP PC with windows 7 worked "out of the box" and has "just worked" to this day!  I cannot say that about the £1650.00. Imac!

    The external Apple superdrives are compatible only with the Macs that did not come with an internal optical drive.  Take it back and get a 3rd party drive, preferably one with drawer loading.  I have an 2011 iMac and bought this external drive:  24X OWC Mercury Pro.  I do a lot of ripping of audiobooks for my iPhone so wanted one with a faster read throughput than USB 2 which is all my iMac has. So I use the FW port on the drive.
    OWC is a very well know Mac supplier and has excellent reputation both for item quality and customer support.

  • ITunes8 -- all optical drives stopped working

    After installing iTunes 8, all my optical drives stopped working. Windows simply didn't recognize them. Device manager said they were missing. However the BIOS found them. Uninstalling iTunes8 fixed it.
    However, like everyone else here, now I can't return to a previous version of iTunes because it refuses to recognize my library file (a .itl file).
    Argg
    What can I do, to either use an older version of iTunes, or fix this problem?

    I tried the suggested fix on Apple's site (http://support.apple.com/kb/TS2372?viewlocale=en_US) but both my DVD drives remained invisible.
    Then I tried the one at MS suggested by Adrian Kingsley-Hughes on his ZDNet blog (http://blogs.zdnet.com/hardware/?p=2600):
    http://support.microsoft.com/kb/314060
    Hooray! It worked! Not only have my drives reappeared, but I am burning a DVD right now using InfraRecorder.
    Unfortunately, now I get a nasty message about missing registry data whenever I start iTunes, but I assume Apple will fix this problem in some future release. I'll have to live with it until then.
    I spent hours on this today and almost ordered some new SATA drives, thinking the IDE controller on my mobo must have gone bad. I really appreciate the existence of Adrian's blog and other third party resources!
    And I am very annoyed at Apple right now. Releasing software that breaks peoples' computers in a major way is not acceptable, IMHO. Leaving the bad software out there and posting fixes that don't work is even worse.
    BTW, I am running XP Pro SP2. I have Logitech hardware and software installed, as well as a number of other USB devices (Treo, Canon printer and scanner, iPod) so (according to Adrian and other sources) I guess I was a likely victim.
    Note that, having been burned before by new major releases of iTunes, I was cautious: I held off on installing iTunes 8 until the second release, hoping they'd have fixed any really bad bugs that showed up in the first release by then.
    Silly me.

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Macbook pro optical drive stopped working after installation of mavericks

    macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

    I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

  • External Optical Drive not working with iMac

    I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's. I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
    I have tried:
    - Startup Utility: Can see the external in there.
    - External shows up on desktop with Windows 7
    - External shows up in disk utility
    - Windows shows up in startup menu with holding down Option.
    I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
    If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
    Anyone have any possible solutions into getting this to work?

    Valen85 wrote:
    I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's.
    Mac Minis without built-in Optical drives behave differently than iMacs with built-in drives for boot ability,
    I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
    I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
    If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
    This is confusing. If you have the external Optical Drive (Memorex) connected via USB to the iMac and insert a Windows 7+ DVD in it, the Apple Bootmanager will see OSX, Recovery HD, Windows (if already installed on the iMac's internal drive) and possibly Windows and EFI boot from the DVD.
    The Windows and EFI Boot will not work if you try to boot the iMac from the external. Test this from the internal Optical drive as well. If your iMac is a UEFI Mac (2013+) it will let you boot from the DVD directly (without Bootcamp).
    Bootcamp Assistant will refuse to let you use the external Optical drive, if you try use it to install Windows. BCA only works with internal Optical drives as far as Windows installation is concerned, on Macs that have a built-in optical drive. The exceptions to this rule are 2012 Macs and some 2011 models.

  • Mac Mini (Mid 2010) Optical Drive Stopped Working. Anyone else?

    A month out of Applecare, my optical drive stopped accepting media. Took it to the Apple store and they said it either needs the ODD cabling replaced (roughly $50) or the entire drive is shot and needs to be replaced (roughly $170 repair).
    While I wait for the parts to come in, I'm curious if this is a common issue and if anyone has any tips before I throw down almost $200 for an optical drive.

    Mr.C UK wrote:
    As far as I'm aware any form of DD or DTS whether it be 5.1, 6.1, 7.1 or indeed 7.2 is discrete by nature.
    They contain discrete sound channels, but all are contained within one bitstream. They are encapsulated, if you will.
    To my understanding, multi-channel PCM is not encapsulated in the same manner.
    David.Austin.Allen wrote:
    It was my understanding from the posts from others that this would carry digital audio.
    Yes DisplayPort can provide audio. But you have to either be using an displayport-to-displayport connection, or using an appropriate adapter.
    But a typical MDP to DVI adapter is not going to pass audio.
    Mr.C UK wrote:
    ...DVI does not pass through sound...
    This is correct insofar as the fact that the DVI spec does not include audio. And as you said, a typical MDP adapter does not pass audio.
    But just so you know, the DVI interface can actually carry audio, if it is present. When I had my 2010 Mini's HDMI port connected to my DVI Detective (via HDMI-DVI adapter) and then the DVI detective was connected to my HDMI reciever (via DVI-HDMI cable), I was receiving the HDMI audio stream at the receiver.

  • Everytime I install itunes on my windows 8.1 64 bit my optical drive stops working.

    Eveytime I install itunes my oiptical drive stops working

    Hello gpanozzo,
    We've an article that can help get your disc drive working correctly again.
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Cheers,
    Allen

  • External hard drive stops working with AP Extreme after Time machine touches it

    *sigh*
    Ok.
    I had a 1.5TB external HD connected to my Airport Extreme (henceforth to be known as APE) working fine, albeit with unexpected slow transfer speeds....not the point. Moving along.
    Updated to 7.6.1 firmware. Ugh. I wish apple would have their standard idiot mode plus an advanced option.
    Getting to the point.
    I decide that im going to try Time Machine but there is no way that im going to try doing the inital backup over wireless. I disconnect the external hard drive from the APE and connect to my computer start the backup and decide encryption is a good idea. Turns out, bad idea as it puts some kind of encryption on the whole volume not just an image which i assumed it would do. I  decide that this time machine idea is stupid and wonder why the **** its trying to backup 130GB of data after i excluded a lot of data. Anyway. I remove the time machine data, do into disk utility and remove the encryption and plug it back up the the APE.
    No dice. The drive will not load at all on the APE and i believe it has something to do with some funky timemachine encryption voodoo. I want to avoid formatting this drive.
    So.
    Help?

    I reformatted and its now working.
    *Ugh*

  • External hard drive stopped working, won't load

    Hi There,
    I have a LaCie external hard drive and I have tons of files on it. It all of a sudden stopped working. It is still getting power, but it won't connect with a computer. No warnings popup but it doesn't load. I've tried it with firewire and usb as well as on a powerbook g4 labtop and an iMac g4. Any suggestions on how to get to the files? Thanks

    Welcome to Discussions - The power brick, even though it seems to be working, may be shot. Try using a brick from another drive and see if that will allow the drive to mount.

  • External hard drive stopped working on Mac after attempt to connect it to a PC

    I have an external hard drive that is new and has been working beautifully.  It is formatted for a Mac.  Forgetting this, I tried to plug it into a PC. Of course it didn't work, but now when I try to plug it into my Mac it doesn't mount. How can I fix it?

    Try repairing it, per #6 in Using Disk Utility.

  • My external hard drive stopped working so I had a tech fix it by moving it to another case since the power supply is in the case. It was working fine till I started getting these messages saying USB over current device, my USB is drawing too much power.

    I need to know how to rehabilitate the hub since it gets deactivated as soon as I plug the external drive. By the way the drive contains important information

    Buy a drive or drive case that is not bus powered.
    Look for help in MacBook Pro forums.
    Helps to include what drive and drive case you used and switched to (you didn't need a tech).
    You can find good selection and assortment of reliable cases from OWC :
    http://www.macsales.com/firewire
    Not knowing what macbook whether you can use USB3, Thunderbolt and other interfaces that would be better.
    WD My Book 2TB External Hard Drive Storage USB 3.0 File Backup and Storage - Western Digital
    Direct you to the proper forum for MacBook :
    MacBook Series Forums 
    https://discussions.apple.com/community/notebooks?view=discussions
    http://www.apple.com/support/macbookpro
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • Optical Drive Stopped Working (common problem)

    Like seemingly everyone else, my macbook's optical drive no longer recognizes dvds or cds, except sometimes randomly. This started a few months ago and has progressively gotten worse.
    I saw a few places that people just got them replaced. Is this the best solution? And if so, will they do it an an apple store or did you send it away?
    Black Macbook, 2006. Mac os 10.4.11.

    If your MacBook isn't on warranty anymore, you can try to clean your drives lens.
    You need to open your Macbook and drive in order to do that, I wouldn't recommend using cleaning CD with little brushes, they can make it even worse (lens in MAcBook drives is so close to disks surface, that can actually cut CD's brush...)

Maybe you are looking for

  • X11 / xterm won't even launch anymore

    I was using X11 with the minor glitches (i.e. cannot move x11 windows to secondary display). For some reason, x11 stopped working altogether today. I go to /Applications/Utilities/X11 and nothing happens. I checked /var/log/system.log and it has the

  • JPA and SQL Server 2005's  Identity Don't Play Nice

    I am hoping someone with a little more senior knowledge of JPASQL Server 2005 can point me in the right direction involving SQL Server 2005. What I am discovering is JPA and SQL Server 2005 do not playing nice together when you use the IDENTITY capab

  • What is the differnce bitween widget and gadget???

    hi all, can you tell me about gadget and widget differnce?? or both or same,, advance thx for your reply.,

  • SCCM Device Query for SCEP 2012 SP1 CU5

    Dear all, I want to create a device query rule for SCEP client agent installed machines , SCCM version we are using SCCM 2012 SP1 CU5. If any one has the query , please let me know. Thanks, Sengottuvel M

  • CATS user-exit

    Hello, We have added a custom field (say cust01) to the CAT2 transaction to enter working time and it works fine. However, when absences are entered, we would like to have this cust01 values at the staging table. But based on certain situation we do