Apple Extreme and USB disk Error -50

Hy all!
Sorry for my bad english, but i'm italian.
So, i have bought a new Apple Extreme Wireless station and i have connected a 2.5" external hd by Western Digital, so dosn't need external power.
The Hd have two partitions, one in hfs+ and the other in Fat32.
On the Fat32 partition i have a .iso file of 2,5gb and i want to transfer it on my macbookpro hd, via cabled network.
All runs well since the 99% of the procees, after i receive an unexpected erron n° -50, and the copy aborts.
if i try with a smaller file, on 600/700 mb, all working well.
It seems that i have problems over the gb.
Could anyone help me?
Thanks
Luke77
Macbook Pro 2.33 Mac OS X (10.4.9)

I had the same problem. I reformatted the disk to " Mac OS Extended (Journald) and then it worked fine. I transmitted over 100 gigs of information to it and no errors. It seems to be a problem with the Fat32 or any Windows format.
17inch powerbook( 1 gig ram, airport extreme) ibook (4 the kids), g4(old), G5 Dual 2.3 - 2 gigs Mac OS X (10.4)

Similar Messages

Airport Extreme and USB Disk Error -50

Hy all!
Sorry for my bad english, but i'm italian.
So, i have bought a new Apple Extreme Wireless station and i have connected a 2.5" external hd by Western Digital, so dosn't need external power.
The Hd have two partitions, one in hfs+ and the other in Fat32.
On the Fat32 partition i have a .iso file of 2,5gb and i want to transfer it on my macbookpro hd, via cabled network.
All runs well since the 99% of the procees, after i receive an unexpected erron n° -50, and the copy aborts.
if i try with a smaller file, on 600/700 mb, all working well.
It seems that i have problems over the gb.
Could anyone help me?
Thanks
Luke77
Macbook Pro 2.33 Mac OS X (10.4.9)

I had the same problem. I reformatted the disk to " Mac OS Extended (Journald) and then it worked fine. I transmitted over 100 gigs of information to it and no errors. It seems to be a problem with the Fat32 or any Windows format.
17inch powerbook( 1 gig ram, airport extreme) ibook (4 the kids), g4(old), G5 Dual 2.3 - 2 gigs Mac OS X (10.4)

Airport Extreme and USB Disk Connection

I have attached a Western Digital external drive, that I can successfully see the files on it when connected by USB to my iMAC, but when connected to my Airport Extreme I am unable to see it. I can however, see it successfully within the "airport utility" as a storage device connected to the base station. Why can I not see it and where should I be able to view it from?
Thanks in advance Neil

1. I do not see the AEBS in "finder" as I do idisk etc.
2. I do not see the AEBS in "disk utility" either
You will not see the disk in either Finder or Disk Utility until it is mounted.
I've had the same issue. Always have resolved them by shutting down the disk and disconnecting the USB, also cycle power on your USB hub if your using one. Reconnect the disk and power-up.
I can connect to the server (though not sure what account I should do this as) but there are no volumes to select.
Disk Utility> Disks> File Sharing> Secure Shared Disks, if it's set to "With base station password. you would use the Name and Password of your AEBS
Sounds like your connecting properly, it's just not recognizing the Disk.
One other thing, do you know how your disk is formatted?
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

HT201210 iphone 4s stopped in middle of update (via wireless). apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id

iphone 4s stopped in middle of update (via wireless). apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do?

Hello Maxayla,
It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
You will find suitable replacement drives at OWC.
They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it.

IPod touch frozen on screen showing apple symbol and usb cable.

Pod touch frozen on screen showing apple symbol and usb cable. Happened during a update attempt.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

My iPhone 5 is stuck on the apple logo and is saying error code 1?

My iPhone 5 is stuck on the apple logo and is saying error code 1?

This is my second iPhone in the space of four months the 1st 1 wouldn't turn on so apple replaced it the phone is currently in the shop not an apple shop but the shop owner did phone me today and say he carnt fix it and informed me it was sayin error code 1 !! I collect it tomorrow what I will do with it I don't no

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Airport Extreme 802.11ac and USB disk failure

hi,
Had an Airport Extreme 5th gen with a USB disk attached for over a year of which my Mac was using Time Machine and creating backups no problem, didnt skip a beat.
Just bought a new Airport Extreme 802.11ac, attached the same USB disk and Time Machine works once or twice then fails saying it cant find the disk. True enough if I open finder and try and find the disk its not listed.
Opening the airport utility it shows the disk attached. If I reboot the Airport Extreme the disk shows up again in finder for a short period of time.
Looks like they released a firmware update 7.7.1 which was supposed to fix this but it seems in my case it hasnt. Even factory reset after the update but no joy.
Normal wireless activities like internet access etc are fine.
Not sure if anyone else has experienced this yet? If not I guess ill try a non self powered disk or something, either that my AE is faulty.
thanks
matt

My experience with the 802.11ac extreme with 7.7.1 firmware suggests Time Machine doesn't work when the name assigned to the device (not the SSID) contains a period, which the out-of-the-box name does.
Out-of-the-box, with the default device name still assigned, I could not get Time Machine to recognize the remote disk on multiple 10.8.4 Macs until I created an empty folder on it. Yet once registered with Time Machine, backups never occurred to the disk--TM status was always "waiting". The server name displayed in TM had the period in "802.11ac" escaped with a backslash (i.e., "802\.11ac").
I renamed the extreme, but used a name that still contained a period. The same difficulty was encountered registering the disk with TM. Once registered, TM status for the disk was still "waiting".The server name again had the period escaped with a backslash.
Finally, I just removed the period from the name. Registering the disk with TM then occurred normally and backup began immediately.
(In an earlier case with the 7.7.0 firmware, I had no trouble registering and backing up to an 802.11ac Time Capsule that had previously been given a name without a period in it.)

Airport Extreme, Apple TV and USB Drive Speed?

I've just purchased a new airport extreme and 1.5 TB external hard disk. I figured out how to mount the disk and share it over my home network. I also designated a folder on the disk as my iTunes music folder (I purchased the airport and HD for the express purpose of achieving this set up, because I've accumulated so much media through iTunes that my MacBook Pro's internal disk has long since been full and I've been storing TV shows, movies, etc. on an external drive). The set up works -- BUT it is SLOW, especially when my Apple TV is syncing with iTunes.
Is there an optimal way to set up these connections so that syncing is not so slow?
Any help would be much appreciated!

HI and Welcome to Apple Discussions ...
*"internal disk has long since been full"*
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Carolyn

Airport Extreme (2009) USB disk & Xbox 360?

Hi all
Does anybody know if an Xbox 360 should be able to see the a USB Airport Disk over the wireless network?
Setup is as follows; Xbox 360 connecting to Airport extreme over 5GHz 802.11a using genuine MS Xbox wireless adapter. Connects to Live just fine. Open NAT. Streams media from connected Vista shared folders and also Media Centre.
I have connected an external USB drive (Tried as both HFS+ & Fat32 format) to the Airport Extreme. All PC's on the network wired & wireless can access the shared files. Xbox 360 cannot see the external drive over the network no matter what. Have tried connecting via guest network with no security. Drive is seen just fine plugged directly into the Xbox via USB. Am I wasting my time?
Thanks in advance,
Cameron

I'm gonna have to bump as well as I've been looking into this setup (Airport Extreme with USB Attached Hard Drive formatted HFS+ & Xbox 360). I've done many searches on these two products working together and no solution yet. I've read of other (non Apple) routers having a third party software allowing xbox 360 to see usb attached NAS.. Hoping Airport Extreme can provide this solution instead

Airport Extreme with USB Disk

It is stupid why I bought the Airport Extreme. I thought I could connect my speakers to it, and then I realize I can't, so I tried to set it up with a USB Disk.
I am running Windows Vista and the Firmware is 7.4.1.
I can see the disk in my Airport Utility, but when I try to use the Airport Disk Preferences, it didn't show there. And if I try to map a network drive with //10.0.1.1 I couldn't connect to it either.
Mind sharing your thoughts on that?
Message was edited by: ksquare77

ksquare77,
Sorry I didn't have an external hard drive plugged up to my Airport Extreme at the time of my first post. But I did go and find it and hooked it up. I also grabbed my Wife's Vista Computer. I was however able to connect to it and read and write to the disk. So I'm trying to figure out what snag were running into on your side.
By any change are you running the latest version of the AirPort Utility on Vista I believe the latest is 5.4.1 you can download it here if you so need to http://www.apple.com/downloads/macosx/apple/application_updates/airportutility54 1.html
After installation it put a little icon down by the clock and I had to left click on it and it asks me for a User name and password. I thought then it would just open a window with the drive but I was mistaken, it did however mount them in (Computer) or the (My Computer), Equivalent I'm not by my wife's computer at this time to get the exact name. And in there I was able to just double click the drive and was on it.
Also a Couple of things I would check are in (Airport Utility)/(Manual Setup)/ (Disks) tab on the top/ (File Sharing) tab in that window. Check to make sure (Enable file sharing) is checked, And that (Workgroup) matches the workgroup your computer is on.
Hope this helps with your issue.

Internet and usb disk sharing fine for Mac but doesn't work for XP

I have a new Macbook, and I also bought the Airport Extreme and a 500gig usb drive to share over the network with our Windows XP desktop. Everything works fine in the Mac, but not in the XP machine. It connects just fine to the base station, but there is no internet connection and it does not connect to the drive. The drive shows up in Bonjour but when I enter the password the error it gives me is that I need to have NetBIOS enabled. I made sure NetBIOS was enabled and still doesn't work. Uninstalled and reinstalled all the software... same problem. Could there be an issue with the network card on the windows computer? Any other suggestions?
The XP machine connected just fine to the internet the first day I had the airport extreme set up, but the next morning there was no interent connection. It works just fine connecting to the neighbor's wireless.

I am having trouble understanding what you are saying.
Microsoft Office can't run on the iPad, only on the Mac. There should be a 25-digit product key you are asked to enter when you run the installer disc. This code is found on the box it came in. If you are not being prompted to enter this code, try to re-run the installer.

AirPort Extreme w/ USB Disk - Need to remove old configuration

I have an external 500Gig USB drive that I have connected to my AirPort Extreme which was formatted FAT32. The drive works fine and I had no problems setting up the AirPort to use it as a shared drive. However, I realized that having the drive as FAT32 will cause me issues if I want to transfer a file bigger than 4Gig.
To correct this I unplugged the drive and reformatted it into 2 partitions. The first one is a 100Gig NTFS partition and the other is a 400Gig HFS+ Journaled partition. If I plug the USB device directly into a PC or Mac, it recognizes and mounts both partitions properly. Using Disk Utility on the Mac it correctly labels and shows me the partitions with their formats. However, when I plug the drive back into the AirPort Extreme, it does not recognize the new partitions and shows me the old configuration of the drive as a 500Gig FAT32 drive.
Is there some way I can remove the old drive configuration from the AirPort without having to reset the AirPort back to factory settings and reconfigure the whole router? I am thinking that if I can do this it will rescan the external drive and see that the partitions have changed allowing me to reconfigure it in the AirPort.

We've seen a number of posts on the forum about Iomega drives not being recognized. Might that be what you are using?
By power cycle, I mean that you power down the entire network for a few minutes. Then start the modem first and let it run for a few minutes, then start the AirPort Extreme if that is attached to your modem and let it run a few minutes, then start the attached drive and let it run a few minutes and finally your computers.
Otherwise, if you don't have any valuable data on the drive, I would reformat it in Mac OS Entended (Journaled). To do this, you must attach the drive to your computer and open Disk Utility. It's located Hard Drive > Applications > Utilities > Disk Utility.

Airport Extreme and USB Hub + Printer and Hard Drives

I have been using my Airport Extreme with a USB hub with 2 external hard drives and one printer for a while now and everything has been going fine. However, recently, the hard drives have stopped registering when I have the USB hub plugged in. I have plugged the hub directly into my computer with everything attached and it works fine but the moment I plug the hub into the Airport, nothing shows up except that the printer still works.
Does anyone know what is wrong? Thanks!

Hi, I've had this same problem now for more than 1 year, and nothing had solved it, until recently. I think I know what the problem is.
It turns out that not all USB 2.0 hard drive enclosures are the same. I had been using "Metalgear Substance II" enclosures for my 500-GB drives, and I had assumed all along that these were fine... I had assumed that one USB 2.0 enclosure was as good as the next USB 2.0 enclosure. WRONG!!!
By accident, I noticed that the drive-to-drive copy times from MetalGear USB 2.0 boxes was about 22 hours for a full 450-GByte transfer of information, while placing the SAME drive into a MacAlley enclosure reduced the copy time down from 22 hours to 6 hours... About 3.5 times faster!!! This means that the piece of crud Metalgear boxes I had been using for my network drives were ssssllllooowwww.
A big bright light blinked on in my head regarding my issues and problems with the Apple Airport Extreme Base-station and all of the problems I'd had with multiple drives, the AEBS locking up etc.. All of my issues had been associated with using the el-cheapo Metalgear enclosures.
As soon as I replaced the Metalgear USB boxes with MacAlley boxes, everything started to work great. No more issues with my Airport locking up. None. Problem fixed. Problem solved.
I can only assume that NOT ALL USB 2.0 BOXES ARE THE SAME. USB 2.0 does not mean that the transfer rates will actually be at 480-mbps. Quality matters. DO NOT USE METALGEAR BOXES WITH APPLE EXTREME. There may be other brands with suck just as much. I can vouch for the MacAlley boxes. They work great... and there may be other boxes that work too. There must be some issue with Apple Airport Base Station timing out on slower USB 2.0 crapola equipment... something that causes it to hang.
Anyway, I hope this helps. My problems are solved since going to the MacAlley enclosures.

Apple Extreme and USB disk Error -50

Similar Messages

Maybe you are looking for