Apple Extreme with Roadrunner Turbo issues NOT RR prob.

I have real slow issues. Without the Apple router used I am getting 14500 DL, and WITH Apple Extreme router in the mix, I am getting ONLY 2700DL. I have a newer imac dual, imac 800 lCD, and 2 Apple TV's wireless linked to the network. I have no idea what the matter can be.
I have the cable modem going into Apple Extreme and all computers and ATV are wireless linked to network.
Message was edited by: Joe Cirino

smags01,
You just need to configure your Airport Extreme (for routing) properly and you should be fine.
1. Cable from modem to Airport Extreme WAN port ()
2. Use the setup assistant in AirPort Utility to enter your ISP settings and configure how
AirPort Extreme shares the settings with other computers.
Then WiFi and local nework.
At the moment you are bridging your public IP and you have just 1 IP by the looks of it.
post if yiou need any detaiils.

Similar Messages

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security.

AMT subsystem failure. The licensing subsystem has failed catastrophically you must reinstall or call customer support. Which never answers. I have reinstalled with the same issues not sure whatelse to do?

this message appear when I launch any program within the CS3 suite
AMT subsystem failure. The licensing subsystem has failed catastrophically you must reinstall or call customer support. I call automated system which refers me to this site. I have reinstalled with the same issues not sure what else to do?

Try this Help article
Error: "The licensing subsystem has failed catastrophically." when you start a Creative Suite 3.x application
Nancy O.

Use Apple Extreme with Comcast gateway

I recently upgraded my Comcast internet service. I received a Cisco gateway DPC3941T. I would like to use my Apple Extreme for my wifi network. In other words, I do not want to use the wifi network from the Cisco gateway. Could I get help getting directions on how to do this?
I have reviewed other threads and got confused -- do I put the Cisco gateway in bridge mode or do I put the Apple Extreme into bridge mode.
Thanks in advance.

Hi,
I've just got my new DPC3941T and having the same issue. I'm able to get around 90MB on 5G wireless connection to my Airport Extreme and MBP, however, I'm only getting low 40s to 50s on 2.4G. When I switch to wireless connection to my DPC3941T, I'm getting over 100MB on both 2.4G and 5G. My Airport Extreme is 2 years old and is running on 7.7.3 firmware.
I too am running doubleNAT and I'm not letting it bother me, however, because none of my macs can be wired for internet, and I have to have my Airport as a part of my network (other devices and such), I would like to know how to get this issue fixed, as bridging either one of the routers didnt help, but whats more puzzling and upsetting is that I can get better download on 5G from Aiport, which is closer to my advertized speed by comcast, but not on my 2.4G. Whats up with that?
p.s. Just in case this info has any relevance...due to a space and wire constrictions, my DPC3941T and Airport Extreme are about 3 feet apart. Unfortunately I cant separate them more, due to my entertainment center's setup and wiring in my living room. I'm not using my WiFi on DPC3941T, only wired (one wire goes to my Airport and another goes for my CCTV), so if wireless signal has to be disabled for DPC3941T I have no problem with that, just let me know if it has to be done.
Any help with this issue would be greatly appreciated. Thanks for the time and help in advance.

Using an apple extreme with an apple express as a wired bridge for roaming. Thinking of adding a wireless express to extend network.

Hi
I have an Apple extreme AC installed with an Apple Express N setup as a bridge through ethernet to extend my network. Im thinking of adding another express to a location that has no ethernet.
All I should need to do is set the extreme for "extend my Network" and setup the express that way as well?
Thanks!

You should not have to make any changes at all on the AirPort Extreme.
Temporarily, locate the new Express near the AirPort Extreme and power it up for a few minutes
On the iPad....
Tap Settings on the home screen
Tap WiFi
Look for a listing of Setup a new AirPort Base Station
Tap on AirPort Express
The setup utility will take a minute to analyze things, then announce that the Express will be configured to extend the AirPort Extreme network
Enter a device name that you want use for the Express and tap Next
Wait a minute while things are set up for you, then tap Done when you see the Setup Complete message.
Now move the Express to a location that is about half way between the AirPort Extreme and the area that needs more wireless coverage and power it back up
Everything above assumes that the AirPort Extreme was set up correctly by 10.6.8. It would have been better to use the iPad for the setup of the new AirPort Extreme, but what is done is done.

TS4051 This MacBook Pro (circa 2011) is the second Apple laptop with the same issue. When I change sites (or at least many of them), the Mac issues a single chime. I do not have any clue what this might be ... or if it even needs repairing if I can stan

This MacBook Pro (circa 2011) is the second Apple laptop I have owned with the exact same issue. When I change sites (or at least many of them), the Mac issues a single chime. I do not have any clue what this might be ... or if it even needs repairing if I can stand the chime.
If anyone has any ideas, I surely would love to hear! Many thanks!
Madelaine

This is the Mac Pro (desktop workstation) forum. You will probably get more meaningful results here:
MacBook Pro: Notebooks: Apple Support Communities
good luck

Hello. My 1st Generation Apple TV with HDMI cable does not turn on. Its a used model purchased on eBay. I've checked and ensured that the electrical plug works. Is there anyway to manually check to see if the unit turns on or do I have a defective uni

Hope I'm using this forum right. I purchased a 1st Generation Apple TV on eBay. Unfortunately, I cannot get it to turn on. I have another Apple TV (1st Generation) that works flawlessly on another TV. So I tried to use the new unit on this TV with same electrical cord and HDMI cable. No luck. It would not turn on. So I do not know if I have a defective unit or if there's another method of turning on the Apple TV. Again:
1. I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
2. I double checked that the electrical was correct - again, the other Apple TV worked correct.
Any suggestions on fixing this would be most appreciated.
Thank you

Welcome to the Apple Community.
A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
Pause a couple of seconds after each press for the Apple TV to accept your selection.
When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
If that doesn't help, I fear the Apple TV is defective.

Ipod 5th Gen is stuck on the apple logo with the loading bar not moving

So I recently decided to restore my iPod 5th gen to factory settings, because I plan on selling it to a friend. When I chose the option to erase all data and reset settings, the iPod turned off, and then came to the black background with the apple logo in the middle. After watching it turn on and off, and not do anything for at least an hour, I searched for answers on the forum. I found that I should reset my iPod by holding the center button and the top right button at the same time for at least ten seconds, or until the device shuts off and then the apple logo is visible again. After I did this, once again, the black background with the apple logo popped up, this time with a loading bar beneath it. After an hour or two of checking on the progress bar, I noticed that it had not made any progress whatsoever. It had not moved an inch since I first started it. What do I do?

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod touch stuck at apple logo with a spinning gear not spinning.

I just got my iPod touch and yesterday, when I shut it down and restarted the iPod, it was stuck at the Apple boot logo with a small spinning gear that is NOT spinning. I have tried to put it into Recovery Mode and DFU mode but both didn't work. Could someone please help? Is there anyway to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all. Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all.
My connection is fine because Im using it on my macbook pro perfectly, so the problem is definetly on apple tv.
Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

From what I understand from this post, yes you do qualify for a replacement.
http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I updated to iTunes 10.5 on Vista. As with iTunes 10.0, The DEP will not allow iTunes to open. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE? I can't update my telephone or iPod. I can't even open the iTunes program!!!

I am sick of dealing with this issue. I wish not that I had never even started using any Apple products, beginning with iTunes. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE AND MAKE ITUNES SOMEHOW COMPATIBLE WITH DEP IN WINDOWS VISTA?
That being said, Is there any way to resolve this? What I did in the past is completely wipe ALL Apple files from my computer, and install an older version of iTunes. It was at least functional. It seems that any version of iTunes 10.0 or more recent is not compatible with the Data Execution Prevention in Windows. You can not remove iTunes from DEP, yet DEP prevents iTunes from running.
The down side is that I can't get the latest updates for my iPhone or iPod. Now, I have a new phone for my husband that needs syncing on my iTunes, and I can't do that because iTunes won't even open.
Can somebody help me out with this, please?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
You might also have to authorize this computer for the new device under the store menu.

Apple Extreme with Roadrunner Turbo issues NOT RR prob.

Similar Messages

Maybe you are looking for