Apple extremes router and direct tv wireless

Help connecting a new extreme router to my direct tv wireless receiver. Receiver sees the networwork, but will not connect to the Internet. Is there some setting In the router?

Sorry, I can only say that what I posted worked for me.
I did not ever set any static IP addresses or enter DNS, etc.
Just removed the apostrophe from my wireless network name and bam....everything connected.
DirecTV did tell me to do a "red button reset" on the DVRs, but I did not do that.
My 2 DirecTV DVRs are about a year and half old. If you have newer equipment, the rules may have changed.
Try online support for DTV if you have not already done so. The phone "techs" are a waste of time.
http://forums.directv.com/pe/index.jsp?

Similar Messages

HT1349 very slow external HDD and usb drive connected to Apple Extreme Router

Hello
So I got a western digital USB drive (500gig) and western digital Live 2TB.
I bought a new Apple Extreme router and connected them both.
USB drive and external hdd (WD Live 2TB) very slow when connected to Apple Extreme Router, using Lion 10.7 and updated both firmware for router, western digital and Airport Utility.
Slow means, it takes half an hour to copy 200 Mb of file to the WD Live 2TB, and its connected to my router with a gigabit ethernet cable!
Is someone else having the same problem, I thought even over usb I should get around 2-5mb range.
I am using Macbook Pro and 802.11n with Lion 10.7.2
Please Help

The USB WD 500 gig is connected to the Airport Extreme using a non-powered USB 2.0 hub, only two things a HP printer and the 500 gig is connected through it. I already formatted it to MAC OS Extended Journalled. ANd I think the speed didnt change.
For the WD 2TB Live I didnt format it to anything, started using it out of the box. I just updated its firmware. I was having the same speed even when I directly connected it to my Mac Book Pro using ethernet gigabit cable.
This WD 2TB Live doesnt have any USB 2.0 or USB 3.0 connectors, just the ethernet cable. I wasnt planning to carry it around. Just wanted to use it as a good ol NAS. So then I saw the fix somewhere and connected to this drive via AFP, afp://MyBookLive._afpovertcp._tcp.local/Public and it become suddenly very fast. Just like how it should be, I easily copied 20 gigs in around 20-25 minutes. (This was dirctly connected to my computer)
So then I thought my problem is solved and disconnected my WD Live and connected it back to the Apple Router again, and the speed became very slow again. Now both the USB 500 gig and this 2TB Live are slow.
Time machine is also very slow.
Thing is I also have a linux and windows machine(in repair, but should be up soon), Since apple is the newest computer I have, I want to make it work on this first. I dont want to use the MACosx journaled on the 2TB right now. Besides formatting the USB 500 gig to this format didnt help with my speed. So the problem can be elsewhere.
- I will try to get a powered USB hub as woodmeister50 suggested.
- I dont know how to connect via iCloud as cigame suggested
Please let me know if you guys have any suggestions. I have tested and returned enough routers in past few weeks. I really want it to work on this combination LionOSX + Airport Extreme + WD Live.
Thanks

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

When adding an external hard drive, should you hook it up to your iMac or your Apple Extreme router?

When adding an external hard drive, should you connect it directly to your iMac or to your Apple Extreme router?

That depends on what you are using it for. The advantage of connecting it to the router is that you can share the drive over your home network and/or over the Internet. That can be convenient but drive access is performed at network speed - slower than when connected directly to the computer. If you need/want to share the drive, connect it to the router, otherwise connect it directly to the computer.

My family owns an Apple Airport router, and my question is that is there a were to remotely access the router and turn it off and on? Thanks

My family owns an Apple Airport router, and my question is that is there a were to remotely access the router and turn it off and on? Thanks

Richard's suggestion will turn off and turn on the wireless function on your Mac computer......but.....it will not do anything as far as turning your Apple AirPort router on and off.......which seems to be the question that you are asking above.
If this is the question that you are asking, it is not possible to power the Apple router on and off from either a local or remote location.

WRT610N router and a WET610N wireless bridge problems

I purchased a WRT610N router and a WET610N wireless bridge and have had a major hard time to get them to work together. The router setup went fine. Internet works perfectly on several machines and devices. The bridge on the other hand has been a big issue. I keep getting "Error 105" when the wizard trys to search for the bridge on the network. This search happens 2 or 3 times during the setup, and it has failed repeatedly at each instance. Sometimes it lets me go a bit further, but it's never completed. I called support, and they didn't know much about it, then we got disconnected and the second guy didn't "have the skills to work with that device" and the first guy appearantly didn't update the notes. I exchanged the bridge, but the second has fared no better. I'm now thinking it might be the router. One thing that leads me to that is the connection button never seems to initiate any proceedures on the router. I can hold that thing down for two minuets and the lights never get going. Anyone have any experience with these?

You have to make sure that your router is running it's latest firmware...
Download Firmware 7.27 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
After re-configuring the router you need to configure the Bridge, to configure the Bridge you have to make sure, Wireless Settings on the Bridge and the Router are exactly identical so that they can effectively communicate with each other...Your Bridge should be assigned Static IP Address of 192.168.1.250, Subnet Mask : 255.255.255.0...Default Gateway : 192.168.1.1(Assuming your router is 192.168.1.1)...After setting up your Bridge you should unplug the Router and then the Bridge, wait for a minute and connect the router first, wait for another minute and then connect your Bridge...It should work...

Mac Address Filtering Issue with DI-624 router and HP D110 Wireless Printer

Just got the D110 Wireless Printer and cannot connect to the wireless router.
I have a D-Link DI-624 Air Plus Xtreme G 2.4GHz Wireless Router.
The error message that I'm recieving from the printer is that "Mac address filtering may be enabled on your wireless router. This can prevent your HP printer from connecting to your wireless network during setup....etc."
The D-Link is setup using WPA-PSK security. If I turn off all security than the wireless printer is able to connect. With WPA-PSK or even WEP enabled I cannot connect the printer to the wireless router. There is no connection to hardwire the printer and the router.
I've logged on to the router's admin and have confirmed several times that Mac filtering is turned off by going to Advanced > Filters > Mac Filters > and choosing Disabled Mac Filters. Where else is this setting? Why is the printer not able to connect?
Further, I check the logs on the router and it shows "Wireless PC Connected" and "Authentication Success" with a note that has the Mac Hardware Address matching the printer's mac hardware address on the Wireless Network Test Report. It would appear that the router is letting the Print in but that the printer is not able to communicate for some reason. It even shows under status > wireless that the printer is connected.
When i spoke to HP, they said to contact the router company and that they could not help. When I called D-Link they said tech support is no longer available for the model. I'm stuck, can anybody help?
This question was solved.
View Solution.

Windows XP, tried both the front of the printer as well as connecting via USB and using the software.
After a few hours on the phone with both D-Link and HP, the issue has been resolved.
Apparently eventhough Mac Filtering was disabled (set to Disabled MAC Filters), the Mac address had to be entered into the router to allow it while keeping the setting to Disabled Mac Filters. To me it appeared counter intuitive to enter the Mac address while it's set to Disabled Mac Filters so I did not try that before getting on the phone with HP. Further on this, the problem did not go away right after adding the mac address but rather after restarting the router as the mac address addition did not take effect without a reboot of the device.
HP was much more helpful than D-Link on this one though it would be nice for HP to add to their instructions and Wireless Network Test Report to add the Mac address just in case. I would have tried that step if it was stated that it's okay to add the mac address and keep mac filters disabled.

We have dsl and apple extreme router, 2 iphones, 2 ipads a pc and a macbook. wireless speeds are terrible until the macbook is disconnected, then speeds are normal. ideas?

we have dsl and airport extreme router, 2 iphones, 2 ipads, a pc and a macbook. wireless speeds are terrible until the macbook is disconnected, then speeds are normal. ideas?

generalgeorge wrote:
This is a new issue on an old setup. The mac was recently upgraded to maverick. thanks
Say no more.. upgrading to Mavericks.. any upgrade install is prone to issues.. the Mavericks one is the worst of any recent upgrades.
Lets just try and isolate the problem.
In the setup of the AE, give different names to the two wireless bands.. so go into the airport utility.. click the AE, Click edit.. click the wireless tab.. and now type in a new name.
Try AE24ghz
Then click the wireless options and change the name for the 5ghz..
Make it AE5ghz
Then update the AE.
In the computer.. select either band.. and see if your other clients are affected if they use the band that the Mac is not using.
Alternatively turn off wireless in the macbook and use ethernet.. oh please please have a Mac with an ethernet port.. otherwise buy a Thunderbolt to Ethernet adapter.. it is well worth having. wireless is never to be trusted.

HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

I'm in the process of creating a WiFi network from my IMac to my LG HDTV. I am incorporating a LG WiFi capable Blu-ray player and will purchase an Apple Express or Apple Extreme router. I need some advise on using this aquipment.

I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV. Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme). What is the correct way to connect these units? It seem self explanitory,but I'm checking my thinking. My HDTV is about 20' from where the airport router will be installed with a wall between them. Has anyone created this network? Is this the best way to create a WiFi network?

I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV. Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme). What is the correct way to connect these units? It seem self explanitory,but I'm checking my thinking. My HDTV is about 20' from where the airport router will be installed with a wall between them. Has anyone created this network? Is this the best way to create a WiFi network?

If you have an Airport Extreme router and a slow Internet connection ...

I know that Internet connection speeds are extremely variable, but I wanted to share this post for anyone having performance problems (very slow Internet connection speeds) while using an Airport Extreme router. This may or may not help you, but it might help someone.
I have a RoadRunner Turbo account, and I was experiencing consistently slow Internet download speeds (an average of only about 300KB/sec). However, when I bypassed my router and connected my Mac directly to the Time Warner modem my download speeds were 6 to 8 times faster (up to about 2MB/sec).
After weeks of tinkering and reading Apple documents I discovered that my Airport Extreme router had an improper setting. That setting is found under: Manual Setup -> Internet -> Internet Connection -> Ethernet WAN Port. When I was experiencing the very slow speeds, my Ethernet WAN Port setting was: '100 Mbps/Full Duplex.' To fix the problem I simply changed this to 'Automatic (Default).'
This one change resulted in a huge, positive performance boost for me. I hope this post helps other people.

You use an App like Filebrowser. Details here:
http://www.stratospherix.com/products/filebrowser/

I just got my very first apple device (apple extreme router) but no dyndns?

I need to access my nas from outside. I got everything working, finally, except my dyndns account. Are you even able to use this router with dyndns? I got it yesterday and I like the signal, but no external access to my nas? I'm looking at this document but it refers to the older models I guess.
http://dyn.com/support/clients/
This may be a deal killer for me. My old router is working but I see these at work so I wanted to get a bit more acquanted with the apple hardware which is why I bought my own router. The signal from this is a tiny bit better than my old router, but I could also access my dyndns account from that one.
I have tried the dyndns.com and http and https://sitename.com and still can't access anything. I have also forwarded the 80, 443, and 22 ports and still, nothing. I know the apple stuff is supposed to work out of the box, but I've had very little luck with that at all. I have now set up several routers and none "worked" out of the box. I have done manual and auto setups. At least now I'm getting a bit more familiar with them to make them work, but I'm still stuck on the dyndns for it. If anyone has any suggestions please feel free to post. I'm still scratching my head trying to figure this out, thanks. The only apple hardware is this apple extreme, I run windows 7 on my computers. Oh yeah that error I still get every now and then from the utility on windows just stinks. Usually after I get that I can no longer even get into the setup.

Check the Sound system preferences. If the volume is turned up and the Mute checkbox is not marked, you don't have anything plugged into the headphone/output jack, and testing the Alert Volume on the Sound Effects pane doesn't generate a tone, then the technician may have failed to properly reconnect the speakers and you'll have to take the Mac back to the Apple Store. First, though, try resetting the PRAM:
http://support.apple.com/kb/ht1379
Regards.

Apple Airport Express and PC Laptops - Wireless Network Help

Hello all,
I have two Wi-Fi enabled laptops running Windows XP, an Apple Airport Express unit and a Netgear DG-632 Modem/Router.
At present the DG-632 is running in modem mode and is connected to one laptop using the ethernet connection. The Netgear DG-632 Modem/Router has one ethernet connection and one USB connection.
My understanding is that if i run one laptop off the USB connection on the Modem/Router and connect the the DG-632 to the ethernet connection then the laptop on USB has to be turned on for the second laptop to access the wireless network.
Assuming the above is true (i am very likely wrong), it would be nice if both laptops were able to access the internet wirelessly via the Airpot Express Unit.
However, being a complete novice at networking, i am little confused about how to do this?
Any help, tutorials or advice would be greatly appreciated.
Thanks in advance.

I'm new. I have a Dell Laptop XP and my wife has a
dell desktop XP . I have DSL with a Linksys wireless
router. After many hours on the phone I was able to
get the ineternet set up for me and my wife.
After all this I found that my Airport Express system
couldn't connect to my stereo. It seems that the
router wireless connection pays no attention to
Airport. Apple says that they could set up another
wireless system to work for Itunes by using my
wireless card in the Laptop.
But... I can't listen to the music and surf the net
at the same time. A linksys person has tried to allow
Linksys to accept and proper installation to the
router. I tried is but it didn't work.
Dell Laptop Windows
XP Wireless card and Linksys
router
Dell
Laptop Windows XP Wireless card and
Linksys router
Sort of new here and to the AE, but have a Dell Desktop and Tosbiba laptop both running XPHome SP2, and on dialup
The Linksys router is hooked to the desktop with an ethernet cable. In the office.
The AE is in the living room and works great for surfing and ITunes.
The only way I could get my AE to work as an access point for dialup and stream ITunes from the laptop to the home theater was to use the setup found here.
http://rgbdream.com/?p=44
The only problem I had with the setup was do not use the $ when entering the password. And had to use a proxy server on the desktop for sharing the dialup. LOL no hope of any broadband here.
Hope this is some help.
Bob

WRT54GX4 Wireless Router and Xbox 360 Wireless Networking Adapter

I just got an Xbox 360 with a Wireless Networking Adapter. The adapter will recognize the network, but won't connect to it. Even if I remove the security, the Xbox 360 won't connect. Is there something else via the router I'm supposed to be doing? I called Microsoft and they said to open the port settings, but I don't know if that's really the issue and I don't know how to do that if I need to.
The ports they gave me were:
TCP 80
UDP 88
UDP 3074
TCP 3074
UDP 53
TCP 53
Thanks for any help if you can.

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Connectivity Issues WRT54G router and 2915ABG Dell wireless card

My wife and I both have Dell Inspiron 600m laptops with nearly the same setup: XP Pro, 2915ABG wireless cards, and the wireless connection is controlled through ProSet Wireless. We have Comcast and connect to a WRT54G wireless router. The router has WPA enabled, MAC address filtering, and the latest Firmware.
I have no trouble connecting to or remaining connected to the router. Her machine connects to the wireless, but randomly loses connection (sometimes it's connected for hours and other times it losses connection in the first five minutes). When I watch the ProSet wireless event viewer, it only says "link down."
To attempt to fix this problem, I have:
played with the router's settings including changing channels
updated her drivers
allowed windows to control the wireless card
reset the router
updated the router's firmware
None of these actions have fixed the problem. The only real differences between the two machines is that I did the following to mine:
My machine was the one that initially set up the wireless router
I used the Comcast install CD on my machine (then deleted all the *junk* that was installed by the CD).
I would like to avoid using the Comcast install CD on her machine because no one needs the extra junk they install. I did set up her machine according to the internet on how to set up Comcast without the CD.
I am trying to figure out if the problem is with the router or with her hardware. Thank you,
Michael

Try upgrading the firmware on the router.
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
Keep the channel on 11 and than give it a try !
C | EH
linksyshelp.blogspot.com

Apple extremes router and direct tv wireless

Similar Messages

Maybe you are looking for