Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM. Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone. If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

Similar Messages

Apple Composite AV cable doesn't work with my iPhone 3G (3.1.3)

Hello,
Just purchased composite AV cable from apple store but it doesn't play videos on TV but audios only,
Is it firmware or my cable prlbme?

I used the original Apple composite AV cable with my iPhone 3G (OS 3.1.3) for a while and it worked fine for video playback in the iPod app. But after upgrading my iPhone 3G to iOS4 the cable stopped working. Video on my TV remains black and is shown on the iPhone's screen instead of the TV, and sometimes the iPhone tells me that this accessory is not designed to work with this iPhone. What did Apple do? Is there anyone who can confirm this change in behavior? Apple still recommends this cable in this article: http://support.apple.com/kb/HT1454?viewlocale=en_US
Regards,
Marcus

I'm trying to pay an app and my acount doesn't work with my payment method (credit card)

Last december I bought the iDraw app for iPad and the charge of my credit card doesn't work, my credit card is ok, but my iTunes account don't let put another type of credit card to do the payment for the app.
Please help me because I can't download any app or update them.
Thanks

DELETING APPS
Touch the app and hold your finger down until all the apps start to jiggle. You will see a circled "x" in the upper left corner. Tap it to delete an app. When done press the Home button.
You cannot delete any pre-installed iOS app.
If there is No 'X' on any apps you have Downloaded... then check in Restrictions... Settings > General > Restrictions > Deleting Apps = Off / On
If the app is in iTunes, then you delete the app in iTunes (Select the App and Press Delete on your Keyboard). If you then sync with your iDevice, the app will also be deleted from your iDevice.

Unable to get upmixing to work with USB 5.1 sound card

Hello!
I'm having some trouble with an USB 7.1 sound-card that I want to use for my 5.1 sound system.
The sound-card is connected to my Lenovo Thinkpad T400 via docking staton on USB.
$ lsusb
Bus 008 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device
Bus 007 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 007 Device 003: ID 04b3:4485 IBM Corp. Serial Converter
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ lsmod | grep snd
snd_hda_codec_conexant 35994 1
snd_usb_audio 116956 1
snd_usbmidi_lib 19723 1 snd_usb_audio
snd_rawmidi 18710 1 snd_usbmidi_lib
snd_seq_device 5180 1 snd_rawmidi
snd_hda_intel 36520 0
snd_hda_codec 148129 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
snd_pcm 77765 3 snd_usb_audio,snd_hda_codec,snd_hda_intel
snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
snd 59141 13 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device
soundcore 5450 1 snd
usbcore 178119 11 btusb,uhci_hcd,snd_usb_audio,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
So I put this into /etc/modprobe.d/alsa-base.conf:
options snd_slots=snd_usb_audio,snd_hda_intel
options snd_usb_audio index=0
options snd_hda_intel index=1
to always get a correct sound device order.
When I then - after reboot - play music, It works only on the two front-speakers. All other speakers - rear and center - are dead.
But when I invoke speaker-test with
$ speaker-test -c6 -D surround51
speaker-test 1.0.27.2
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 87381
Period size range from 48 to 43690
Using max buffer size 87380
Periods = 4
was set period_size = 21845
was set buffer_size = 87380
0 - Front Left
4 - Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Time per period = 14.569581
all speakers make a noise when they are shown during the test correctly.
In the wiki, I tried some examples on the configuration of ~/.asoundrc as described, but none of them worked - everything I specify there is effectles, even after reboot.
What I've tried so far in ~/.asoundrc (without success):
pcm.dsp {
type plug
slave.pcm "dmix"
pcm.upmix51 {
type upmix
slave.pcm "surround51"
delay 15
channels 6
pcm.!default "plug:upmix51"
pcm.upmix71 {
type upmix
slave.pcm "surround71"
delay 15
channels 8
pcm.!default "plug:upmix71"
pcm.dmix6 {
type asym
playback.pcm {
type dmix
ipc_key 567829
slave {
pcm "hw:0,0"
channels 6
pcm.!default "plug:dmix6"
So what am I doing wrong?

Hello there!
In the german forum, I found some more help.
This configuration now got 5.1 sound mixing to work via ALSA (without using PulseAudio).
$ cat /etc/modprobe.d/alsa-base.conf
options snd_hda_intel index=-2
options snd_usb_audio index=-1
$ cat /etc/asound.conf
pcm.!default
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
$ cat /proc/asound/cards
0 [Device ]: USB-Audio - USB Sound Device
USB Sound Device at usb-0000:00:1a.7-5.4, full speed
1 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc620000 irq 47
4 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT12WW-1.01
But this doesn't solve all my problems.
I'm still searching for a way of how to use the internal intel sound card as default PCM device if the USB sound is unplugged or not available during boot.
Any ideas?

Firewire 400 camera doesn't work with 800 port on iMac

I have a firewire 400 camera that i'm using for a project and one firewire 800 slot on my iMac (Late 2009).
When I plug the camera in, nothing responds no matter what I do - tried resetting the PRAM and SMC.
Compare this to my older iMac (Late 2007) which has both firewire 800 and 400 ports. I plug it in and it pops up using the underlying Quicktime controller api on either the 800 or 400 port no problem.
So I figured after trying to install a firewire camera library (libdc1394) which I need for my project which didn't work, that it must be a hardware issue, so I took it to the Apple store. The genius at the store booted the OS (Lion) from a firewire drive via 400 to 800 cable (no external power to the f/w drive was used) and then using the spare 400 slot on the hard drive, he plugged (daisy chaining) in my camera and it loaded!
So this suggested 2 things - my OS is corrupt or my card can't read straight from my device but why a hard drive in between would change this is beyond me.
I came home and installed OS X on to an external USB hard drive and loaded up from it - so this is a fresh version of Lion, there should be no software issues.
Plug the camera in to the I/O board of the iMac but load the OS from the external USB hard drive - nothing happens, the profiler doesn't detect anything at all.
On a side note, I installed XP and Ubuntu Linux and they also can't detect it, which further suggests its the device or I/O board when interfacing directly with this camera. I've tried providing the devices with external power, daisy chaining 2 cameras, using a usb hub....nothing works.
Just for good measure, I tried to boot Lion off the external USB on my older iMac and again, it worked no problem, which to me really narrows it down to the hardware.
Can anyone work out this mystery? Driving me nuts!
I feel like perhaps the port is a bit dodgy and when the genius daisy chained it, it worked better, but no idea why.
Someone said I should get a firewire 400 to usb adaptor - I actually can't find any...do they even exist?

Maybe something in Apple's quick assist will hlp
http://support.apple.com/kb/HT1151

Apple thunderbolt display can work with a macbook pro 2009?

Apple thunderbolt display can work with a macbook pro 2009 (mini display port? The image passes through the mini display port to the monitor, but the connections (Firewire, USB, ethernet) do not work. Can you confirm?

I'd love to get confirmation if this is the case too. I was all ready to buy the new iMac until I found I couldn't use it as an external monitor for my DisplayPort-based MacBook Pro. And then I was all ready to buy the new display.
I really hope Apple hasn't restricted this to purely Thunderbolt-equipped Macs. I know I'll end up upgrading my MacBook at some point but I can't do so just yet, and this means I'll have to go for some third-party display, camera, speakers etc for the new Mac Mini which is crazy.
James

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Apple tv doesn't work with my receiver

I updated my apple tv 3 and now it doesn't work with my Denon AVR-591 receiver. When I called Denon they said unfortunately the firmware on my receiver doesn't update and therefore may not work with certain devices. Is this possible?

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

How can I order an iphone 6 and pick it up from one of the apple stores in London. It doesn't work with reserve and pick up because the 64 gb is never in stock.

How can I order an iphone 6 and pick it up from one of the apple stores in London??? It doesn't work with reserve and pick up because the 64 gb is never in stock.

Thank you for replying. Yes I deleted the old email address..

HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

That's why, you will need to upgrade to 10.8

HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why ?

My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why ?

The Airplay icon will not display if the OS is unable to locate any Airplay devices.
I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

The airplay in apple tv doesn't work with my ipad

I have problem the apple tv.
Why the airplay in the apple tv doesn't work with my ipad,every time i set the password in the air play it won't allow and the (clear password) come out on the screen

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Similar Messages

Maybe you are looking for