Apple hardware test..i dont know what this message means..please help!!
hi all..i really need your help. i have been having serious problems with my g4. it has been telling me to restart it while using most of the programs that come with installation. sometimes black lines with wording comes across the screen forcing me to shut it down. now all the programs are quitting one right after the other. i have reinstalled the system. i have no added memory installed...jsut the 256mb standard. tonight i ran an apple hardware test and i got this message. "memory- error detected error code 2mem/3/4:dimmo/built in" what does this mean? do i need more memory and if so where do i get this? thanks so much!
Based on that information the built in RAM has failed. What you have been seeing is a Kernel Panic. Sadly since it is the built in RAM, adding more memory wont help, not that you cannot doing it, but I don't think it will stop the Kernel Panics. Bad RAM causes OSX problems, namely Kernel Panics so until the problem with the built in RAM is dealt with this will continue to take place. Being built in RAM, that means you'll most likely need a new logicboard. You will have to get your machine repaired if you wish to continue using it.
Similar Messages
-
my ipod wont play music on my ihome and I know it is not the ihome because I put my brothers ipod on it and it worked I dont know what is going on please help me
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
i was upgrading my ipad, for atleast 4 hours.. the screen remains itunes.. and i dont know what to do.. please help me
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I was downloading apps that i deleted and my 4th generation froze. So i turned it off and restarted it and nothing happened. It is just showing me the apple screen after you restart it. I dont know what to do please help!
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Does anyone know what this is? Please HELP
Here is a link to a picture because what i'm seeing is hard to explain.
http://i971.photobucket.com/albums/ae199/tschulze/MacBook%20Help/Screenshot2010- 01-05at113523AM.png
using snow leopard, when i'm online (using google chrome) and when in use the 4 finger swipe down i get this unusual blue box and it if it have one window open this box takes up space of a window so it looks like there are 2 windows open instead of just one. I don't know what this is but i would very much like to get rid of it!!!
PLEASE HELP!!!HI,
Interesting...
Try downloading and installing the 10.6.2 combo udpate available here.
http://support.apple.com/kb/DL959
Even if you have already updated to 10.6.2 it's ok to do this.
Carolyn -
.
Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
You will find suitable replacement drives at OWC.
They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it. -
Dont know what this effect is called, help?? how would i do it in FCE?
hi,
I need to get two me's in the same shot.
E.g. i need a video feed of me talking to myself, but in the same shot.
I could do this with super imposing but am not impressed with the results.
Is there any other way i could do it, e.g. some way i could tell FCE to place the left half of one video feed together with the right half of another video feed, then merge them??
Or something that would give a similar effect without a blue/green screen?
ThanksIf you tie off the shot, stay on one side for one take, and on the other for the other take, and the light doesn't change, this should be easy to do by placing the shots on top of themselves, and simply cropping the top clip to reveal the bottom.
Jerry -
Does anyone know what this message means?
I use macbook pro mountain lion OSX 10.8.2, Traktor Pro 2, Nicecast, Shoutcast, & Wavestreamer to stream a mix weekly over the internet. I never had any problems before I started the actual "radio show". I would occasionally check to see if I was able to get on air and everything was good until my first broadcast. I couldn't connect. After checking my settings and connections and multiple restarts, I was able to connect and finished my mix. I have had 3 broadcast and 3 failures. The last broadcast I wasn't ever able to restablish any kind of connection. I tried contacting tech support for all of the players involved (2 are in Europe and one is on the East Coast) but it being a weekend couldn't get any help. I found this log in my console and think maybe it can help me however, I don't understand it. Can anyone help?
12/2/12 10:31:31.462 PM Nicecast: Invalid URL passed to an open/save panel: '(null)'. Using 'file://localhost/Users/xxxxxxxxxxx/Documents/Native%20Instruments/Traktor%202. 6.0/Stripes/000/' instead.
(private)This is not strictly a podcasting question, and I'm afraid the technical issues involved are outside my experience. The method you are using involves mostly non-Apple software, so I don't know how much change you have in the Apple Discussions of finding someone who is familiar with them, but probably the best place to ask is the Mountain Lion forum and I will ask the Hosts to move this thread there.
-
hello. my ive been trying to restore my ipod touch 4th gen because it was frozen on the apple logo. i got it to go to the connect to itunes image. i plugged it into my computer to try and restore. i open itunes and it says "you must restore this ipod to use itunes". i click ok and then i accept the terms. after that it shows that it will take 41 mins to restore, but then it says "we connot restore this, there was a problem. it also says to check your network connections or try again" my network connetions are on and its still not working! please help
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
Hi,
Plugin can be loaded from the link below. This is getting installed on the firefox 3 version but each time I install it on Firefox 4 version it shows the compatibilty error. I have disabled the compatibilty check for firefox in default:config setting but still getting the same error. Please resolve asap.
Thanks in advanceThat extension has a maxVersion of 3.*.* (3.0.* in update.rdf) and can't be installed in Firefox 4.
<pre><nowiki><em:minVersion>1.5</em:minVersion>
<em:maxVersion>3.*.*</em:maxVersion></nowiki></pre> -
I have a MacBook Pro with Lion Preinstalled, so AHT was present on the hard disc and worked when the product was new. One of the first things I did from new was run AHT and it worked fine. But now it doesn't start - instead the machine (eventually) boots into normal OS X.
Holding down "D" no longer starts Apple Hardware Test! Any idea what's happened and how I fix it? Or do I need to go to the Genius Bar?
Software Mac OS X Lion 10.7.3 (11D50b), if it makes any difference.
Any ideas?Thanks. However, even with an internet connection that doesn't work for me - the machine just (after an extended delay) boots normally. It doesn't download.
Option-D works for an Internet-based AHT. However that only works with an internet connection. It doesn't seem to download it and install it - it needs internet every time.
Any idea how my local copy of AHT disappeared? I haven't repartitioned the drive or knowingly deleted anything. And how do I reinstate it (because if you need AHT your hardware problems may preclude internet access!)? -
I restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?
i restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?
I would suggest you try to update your iOS 8.0.2 to the latest iOS 8.1.0 with iTunes on your computer. Don't try to do the update on your iPhone, it takes time and some error always occur. After updating to iOS 8.1.0, if your iPhone can't restart properly, try Wondershare Dr.Fone for iOS trial version. It will say that your iPhone is not in normal mode, offering you the option 'restart the device'. Just click the button to let your iPhone restart.
-
Help Dont know what this code is doing ?????
i dont know what this code is doing from the for part can some one explain it for me
i am confused starting at the for statement thanks for the help
public class LeastToGreatestPlaceHolder {
public static void main(String []args) {
int [] myArray;
myArray = new int[3];
myArray[0] = 6;
myArray[1] = 7;
myArray[2] = 9;
for (int i = 0; i < 2 ; i++){ // confused here
for(int j = 1; j < 3; j++) {
int placeholder = myArray[j];
if (myArray[i] > myArray[j]) {
myArray[j] = myArray;
myArray[i] = placeholder;
System.out.print(myArray[0]);
System.out.print(myArray[1]);
System.out.print(myArray[2]);Have you tried running the program and seeing what it outputs?
Have you considered writing out the state of the array and running through the code by hand?
I'll give you a [head start|http://java.sun.com/docs/books/tutorial/java/nutsandbolts/for.html]. -
Anyone know what this all means !! - Sense Key = hardware error ?
I have just been tring to make a Back-up copy of a CD using Toast ( v7.1 ) and at the end I keep getting this message, does anyone know what it all means please.
Sense Key = Hardware Error
Sense Code = 0x44, 0xD6
Internal Target Failure
Now before we go on, I have been using Toast all week making Back-ups with out a problem so I don't know why all of a sudden I am getting this message.
It also states that the Lead in & Out failed.
Hope some one can enlighten me.
SteveIn some cases if you have done a lot of burning you will need to empty the cache files before you can burn successfully. I have had to do this after I burned 4 or 5 movies and then I was good to go again.
I use 3 programs.
Macjanitor.
http://personalpages.tds.net/~brian_hill/macjanitor.html
Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
Onyx.
http://www.titanium.free.fr/pgs2/english/download.html
If I am doing a lot of burning I run these 3 once a week need to or not just to keep the trash all cleaned out of my system.
I try to always follow this Media guide as well and find it to be invaluable when buying good media, for DVD.
http://www.digitalfaq.com/media/dvdmedia.htm
This may do the trick for you.
Don -
I just got an Ipad and I really dont know much about them its a 32gb 4g wi-fi, I use at&t as my server(dsl) and that works fine but I need to download my mcafee which comes with my at&t for free but it wont let me download it says I need more than 6.1.0and I dont know what to do can anyone help, I know someone that has 1 just like mine but she doesnt use a antivirus and doesnt have any trouble but,,, I have a laptop and a desktop and I use mcafee on both,, so any suggestions, I just down know what to do,,, can anyone give me input on what to do, and I also what to know is there anyway I can use my portable device that I got thru at&t that I can buy minutes on, is there an adapter for this ipad that I can use this on,, help I need all I can get,, thanks chrystie
You can not install it.
Only apps from the official Apple App Store can be installed.
Maybe you are looking for
-
How do I Remove password-encryption in a PDF file
Hello Can anyone help me remove the password encryption on a PDF file? I am trying to submit a PDF file to a on demand printer & they di accept the file if it is password-encrypted. Thanks
-
Getting wrong values when using sum() and last() functions in aggregations.
Hi.. I created a request in presentation servicews it includes " employ id,name,organization.cost center,annul salary,haouly salary, head count". for employ 13 cost centers available so 13 annul salaries for 13 organizations.each has annul saari 1040
-
How can i get an apple free theme?
Hi, I'm creating a dvd and some of the themes are pretty nice but i don't want the apple of mac that is showing on all themes. Is there a way to delete it or get the themes without it? Thanks
-
Exchange Rate Differences function and when to use
The company I am asking about is based in the US, but also has offices and transactions in Canada. Does the Exchange Rate Differences function need to be run at month-end before finalizing the financials, in order to "re-value" the Canadian accounts
-
HT2731 how can i unlock my pass code
how do i unlock my passcode