Apple has boot camp, does that mean the video driver will work?
so does the mac ati 1600 work natively with windows now that apple has drivers for it, bootcamp does say they have a graphics driver????
Apple's published information on BootCamp indicates that they provide a Windows-native ATI driver, so it would appear that the answer is yes. How well optimized that driver is for Windows I can't say, but it has to be a significant improvement over the generic Windows video driver.
Similar Messages
-
Iset up an icloud email account but the instructions say that It needs to be 10.75 or higher. does that mean I cannot have an Icloud Email account?
Welcome to the Apple Community.
You can use the iCloud mail address, but you can't use the rest of the iCloud services.
Configuring Mail in Snow Leopard -
i plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?
Hello there, Shellywms09.
The following Knowledge Base article points out why you are receiving that message on your iPad:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?
There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb -
Bought my iMac through Apple Education Pricing. Does this mean the warranty has been extended from the original one year to three years?
No. If you want an extended warranty you still must purchase it. It is not included with education pricing.
-
If in my Hardware section of System Information, when I select Thunderbolt and the reply is:
Thunderbolt: No hardware was found,
does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached and that the computer does have thunderbolt?
I have Lion and both my Mini Server and Macbook Pro are less than a year old, however both were bought from Apple as reconditioned units so they might be older, and I expected they would have Thunderbolt but when I connect a Black Magic Intensity Extreme unit which is a thunderbolt powered and driven Device using a Thunderbolt Cable to either computer, it is not recognized.No other information in Sys Info and I guess as both units, Mini and MBPro, were reconditioned, they were pre July and February , 2011, respectively.
I don't suppose there is any way to add Thunderbolt or USB 3.0 to prior generation Mac Products or get similar performance. -
My wife and I share one Apple ID. I am on iCloud and she is not (yet). If she turns on here iCloud capability does that mean our device content will be merged?
Welcome to the Apple Community.
To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
To avoid your data being merged, your wife should open a new account and use it just for iCloud, she can continue to use the existing account for iTunes, so that you can continue to share your iTunes content. -
so i lost my iphone and i remotely locked it on my ipod and it says i will recieve a email when its been locked but i never got one does tht mean the thief couldve went to itunes and made it a new device..?? please reply im really worried and i just go it like 2 weeks ago :3
and when i remote lock it am i still able to find it ??aww so if they restore it i wont be able to dial the old phone number that i had on it even if i turned it on.... and since i never got a message saying that the lock has been successfully added they already restored it :3
and would they just get a bill of their own.. i dont want to get a bill cause of them using it.. -
What does that mean the result of (int)character ?
---- code snippet
char ch = '가';
System.out.println( (int)ch );
As you might know, the value of ch is Korean character that takes up to 2 bytes.
And the result of above code is 44032.
What does that mean this number? Is it ASCii code or unicode number?
Of course, if the value is 'a', what I get is 97 which is ASCii code for 'a'.All Java char values represent UNICODE values (defined at www.unicode.org).
But it's generally more common to represent them in hexidecimal because the code is divided into 255 pages of 255 characters. -
If your message doesn't say not delivered or delivered does that mean the recipient has blocked me
I need help
but if it says neither of them does it mean I've been blocked or if it says not delivered and it is 100percent right recipent does it mean I've been blocked
-
Boot camp does not format the partition for Windows 7
I recently purchased a copy of windows 7. This is the full version. I downloaded the drivers to a usb drive then placed the windows 7 disk in my apple optical drive to partition to disk. After portioning the iMac restarts and gives the a blank screen with _ blinking. It seems as though the windows partition has not been formatted. I cannot enter a dos command such as format or anything else. If I start up the mac again with the windows 7 disk in the optical drive I will be prompted to insert a bootable disk. I understand that after the partitioning takes place that bootcamp should start the installation process. By the way after working on this for quite a long time I decided it might be the copy of windows so I returned it and got another. Same resuts. I hope someone can help.
ThanksRead the instructions and it is pretty clear that you format to NTFS where you see the BOOTCAMP partition.
All the articles and how to are here:
http://www.apple.com/support/bootcamp
Boot Camp 101 -
Boot Camp does not have the "remove" option
PLEASE DISREGARD THE QUESTION. IN CASE YOU WONDER BOOT CAMP ASSISTANT APPLICATION OFFERED ME TO REMOVE WINDOWS AFTER THE FILEVAULT DECRYPTION WAS COMPLETED AND SYSTEM REBOOT.
I was installing Windows and while at the expanding files stage I stopped the installation (don't ask me why) and then I waited for a while with the hope that I will be prompted to a "installation has been stopped" or similar screen but it did not happen. Then I had to shut down by holding down the power off button.
Now Windows appears to be installed in the opening screen as well as the Startup Disk application. However when I open the Boot Camp Assistant application, removing Windows option is not available. Instead, installing option is available.
Knowing that one should remove the bootcamp partition via the Boot Camp Assistant application rather than Disk Utility, I am now totally unsure about how I must proceed. (I know internet recovery of the OS is an option, but frankly that's my last resort).Boot from your Windows installer disc. Reinstall Windows. After it finishes you can decide whether you wish to keep it.
-
I have poor router connection to my iphone in one part of my three storey home. I have a BT Homehub router. I am considering purchase of Airport Express to improve my network connection. Will AE function with the Homehub. I have read that it may not! Any advice please?
Geoff SnrThe AirPort Express will work with the Homehub if you establish a permanent Ethernet connection from one of the LAN <-> ports on the Homehub to the WAN "O" port on the AirPort Express.
The AirPort Express will not work if you are planning to connect the Express to the Homehub wirelessly to extend the network. -
I've downloaded Windows 7 onto my USB drive and Boot Camp does not recognize the disk.
Following the Apple Support manual, I've initiated the creation of a partition and downloaded Windows 7 from Microsoft's online store to a USB disk. When I attempt to initiate the creation of my partition to install Windows 7, I receive a notification that my installer disc could not be found.
Thanks in advance!Welcome to the Apple Support Communities
If your Mac has got the SuperDrive, you can't install Windows from a USB disk -
TS3297 secure link to itunes has failed what does that mean?
what do the message a secure link for itunes faied?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
Warning messages recieved when activating z* tables after refresh.
Hi all, We are having a problem in activating tables. After the system refresh, while activating z* tables warning messages are recieved. Some of the warnings recieved are as follows: Index LIKP-BGR is not in customer namespace. Enhancement category
-
Upgrade HFM 9.2.0.3 to 11.1.1.3
Hello, I'm new to the subject hfm, like to know what are the benefits of carrying out an upgrade of HFM 9.2.0.3 to 11.1.1.3???, is recommended??? and why not upgrade of 9.2.0.3 to 11.1.2??? is much the change in architecture that makes it very diffic
-
JAXB: NPE on high load in Coordinator.java:112
Hello, I'm using JAXB 2.0 and when running high load tests I get NPE. In my code I have a static marshaller (initialized in a static initializer) and the method which makes use of it is synchronized. Once every few (~10) invocations of my method I ge
-
Cannot import NEX-6 raw file (ARW)
I downloaded a Sony NEX-6 raw file (ARW) from dpreview to check out the image quality. But, Aperture does not "see" the file at all. I have the latest Aperture 3.5.1 with Digital Camera Raw 5.04 (and Maverick) – and I have a Sony A700, with no proble
-
Sometimes when I have 2 or more websites open, the tabs for them do not have the"X" on the right end that I can click to close them. Others right next to it may have the X or not - it seems random. The only way to close the x-less tabs is to right cl