Apple: How to Save Audio Settings in QTP 7 ???

Searching through the forums here and see that I'm apparently chasing my tail here trying to save Audio settings on a QT movie that I need to boost the audio on.
Is it true that we can't save our modified audio settings with Pro??? If so, WHAT are we supposed to do in order to be able to accomplish this? Sheesh, I would NOT have upgraded if I'd know this - removing features without notice doesn't seem to be the way to play nice. I've got to believe that this is a DEFECT that someone within Apple is aware of and is fixing.
Someone at Apple care to comment? I see that I'm not the only one unhappy with the change.
Please advise and I also welcome suggestions for another option out there.
Many thanks...Bob
  Mac OS X (10.4.7)  

If so, WHAT are we supposed to do in order to be able to accomplish this?
I use MPEG Streamclip to adjust brightness, contrast, saturation, and/or volume settings. However, I normally do this in conjunstion with recompression to an iPod compatible format.
I would NOT have upgraded if I'd know this - removing features without notice doesn't seem to be the way to play nice. I've got to believe that this is a DEFECT that someone within Apple is aware of and is fixing.
Since QT 7 is supposedly based on an all new framework, possibly there was no choice in the matter for one reason or another. I agree with your frustration. Have you used Apple's QT feedback to request these features be interegrated/reintegrated in future upgrades. If enough people make their wishes known, perhaps Apple will eventually take heed.

Similar Messages

  • How to save slideshow settings so when I press Ctrl-Enter it does what I want?

    How to save slideshow settings so when I press Ctrl-Enter it does what I want?
    eh?
    R

    I tested what you gave me there Rob. On my Mac I have dual monitors:
    -Only blackens/show slideshow on one monitor (the main monitor, if I move LR to my secondary monitory, the slideshow is still on the first, but the second still runs normal, with LR just sitting there).
    -If I disable slide durration I have to manually advance the slides with the right arrow.
    -I don't have "Lightroom" (or with my current settings any) text on the screen.
    -Does not repeat.
    My Windows machine doesn't have dual monitors, but the others work correctly....
    That is, until I thought about this differently. Since we are looking at changing Slideshow settings, I was naturally in the Slideshow module. But then I remembered the whole point of the Impromtu Slideshow was that you can view slideshow playback from any module. Once I returned to Library and clicked Command/Ctrl+Enter, then I saw exactly what you are talking about. Both monitors are blackened, slide duration is ignored, etc.
    You know why? Because the Impromptu Slideshow uses one of the templates when outside of the Slideshow Module. Which one? Well, Default +, of course. How do you change that? Right-click (Command-click) the slideshow template you'd rather use and select "Use for Impromptu Slideshow".

  • How to save panelCollection settings?

    in ADF11G af:panelCollection can give RichTable some awsome function, like set column hidden or not , column reorder and so on. how can i save this settings to login user or browser cookie?

    Hi,
    also note that the column hide/show state is saved on the af:column not the panelCollection. The panel collection calls the RichColumn API to change the visible state
    Frank

  • How to save scanner settings?

    Hi,
    My Acrobat Pro 11.0.06 does not save scanner settings. So every time I scan, I have to select the scanner from the dropdown list and change the settings (scan front page or double sided, paper size, etc). Appreciate any help on what I should do to solve this.
    In case that's useful, my scanner is a HP Photosmart.
    I also use Acrobat at work, and it saves the last scanner setting automatically.
    Many thanks!
    Don

    Hi,
    also note that the column hide/show state is saved on the af:column not the panelCollection. The panel collection calls the RichColumn API to change the visible state
    Frank

  • Premier CS3 how to save your settings (Presets) ?

    I installed my Premier CS3 on my new PC and wanted to use some of my old PRESET setting that i have saved on my other PC...
    Ok here its :
    On my old PC i modified let's say a Trapcode plug in and saved it under PRESET , basically i chnged certain prameters within that plug in and saved it under a new name, now that i upgraded my PC and reinstalled my Premier on the new PC, is there any way i could go to my old PC and somehow save that file and use it on my new PC, so when i try to use my old preset, i get the same settings ?
    thanks !

    Ok Harm here its..
    I used the Magic Bullet's MisFire on one of my clips, but you know how you goto effect control settings and change certain parameters and then you can save it under a user PRESET, which appears on top of all effects as  Presets, ok there we go .
    so, everytime i wanna use the MisFire i goto Presets on top of effect page and use that one instead of the actual MisFire from Magic Bullet video effect section, that way i don't have to change any parameters , its already set the way i wanted to look !

  • How to save chart settings to file

    How can I easily save the whole settings of a chart (not the chart data) to a file?
    The solution should also work with an executable.
    Saving every property isn´t really handable.
    Thanks for hints

    Good morning, 2ev!
    The way to do this is with Property nodes. If you right click on the chart and select create property node, you will get a pulldown menu on the wiring diagram. Select the parameters you want (be sure to choose READ all) and then direct them to a file. A simple file generation script should be all you need to do this automatically. Look at the attached example....you will want to select your own parameters to save. Good luck!
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705
    Attachments:
    settinglogger.vi ‏26 KB

  • How to save trackpad settings

    upgraded to the latest yosemite and now my trackpad settings keep resetting no matter how many times i change them

    com.apple.driver.AppleBluetoothMultitouch.trackpad.plist does not exist in my preferences.
    What should I do??

  • How to save router settings?

    Hey,
     Can anybody tell me how or if I can save off my D-Link (DIR-628) router settings?
    I have to format my hard drive and I remember how much of a pain it was to set it up.
    Thanks!
    Jack

    Perhaps you should ask in a D-Link forum...you understand this is a Linksys support forum, and the two brands ane made by different manufacturers, right.....?
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • How to save edit settings under preferrences to use when creating or printing a PDF from word 2003 Windows PC 8.1

    I have tried to save my PDF settings after editing them, but when I go to "Print" to PDF and check the settings I keep getting Standard default settings.
    There is no Adobe PDF listed as a file heading to change conversion settings on my Word screen.
    I have tried to create a PDF by open file through the Adobe application and also by trying to print through the Word application with document open and using Adobe PDF as the printer driver.I have changed or edited the settings but they do not appear as an option to select, just the standard default settings.
    I have been able to save my setting as a Adobe PDF job options, but can't access them or use them when it comes time to convert to PDF.
    Any help would be appreciated. Thanks

    I have apprached it 3 different ways:
    - by opening acrobat and going to preferrences, clining on  convert to PDf
    - Microsoft Word, then changes each section of the edit settings, ie
    general, fonts, images, etc make the cahneges then hit OK, at this point I
    get a save as option rather than a save. It saves my changes as a PDF, but I
    am not able to access it when I go to make the PDF.
    - I also have tried to print PDF from Word  and got to properties to make
    the changs with the same results as above.
    - Then I tried yur suggestion and went to the printer in the control panel
    and had the same results.
    I am using mircosoft word 2003 which has been compatable with my windows 8.1
    I think the problem may be I am using a "trial" version of Adobe Acrotbat DC
    2105 version. It must not belettingme save the setting changes.But this
    shouldnot be if they want me to really experience the full effects of the
    program.
    I appreciate your help, thanks

  • How to save custom settings

    I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
    I know of rooVid but it does not work for leopard.
    Please advise thanks.

    I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
    MPEG Streamclip (free) will allow you to save named "Presets" which can be recalled/loaded as needed when using Streamclip to perform the various exports via the QT/QT component structure embedded in the current OS. (I.e., the created file is not for use by QT Pro itself.)

  • How to edit audio settings in CS3

    I don't want to use Adobe Media Encoder. I'm using classic Export>Movie tab. I need to edit audio bitrate, but I can only edit Sample rate which is  in Hz.
    I need it to be 128kbps
    Additional settings cannot be clicked, since I have a small number of encoders.

    Lossless means that no visual information is lost during the compression stage.  The entire visual image can be exactly reconstructed.  Uncompressed is one such method of achieving this.
    I do not use the Xvid codec, so I can't comment on the quality of external encoders.  VideoHelp.com is a very good resource for this kind of thing, however.  I'd do some research over there.

  • How to save the settings (for Audigy 2

    Hi,
    Is it possible to save the setting for "EAX console", "Surround Mixer" and "Speaker Settings" and to load them fast with Audigy 2 ZS? I'm using different settings for movie watching (Bass redirection OFF, EAX effects off, CMMS surround OFF etc.) and for music listening (Bass redirection ON, EAX effects ON, CMMS surrounf ON, Graphic Equalizer ON etc.) and each time I want to change them, I have to start 3-4 applications. I remember for the good old SB Li've! 5. there were an application which allowed to remember specific settings for any started application... Is there any way to make my life easier with Audigy 2 ZS?
    Thanks in advance.

    Hi
    for display of cost in maintenance order you have to customize in IMG>PM/CS>Maintenance and service processing>Basic setting>Settings for display for cost
    Here you have to define the value categories and assign cost element to them ,and you have to define the default values value category in maintenance order
    Also you have to assign the costing variant for plan and actual cost in T code OIOF
    regards
    thyagarajan

  • How to save Subtitles Settings in Text?

    I have a Subtitle-heavy doc to editt, and the tiny letters in Final Cut are killing my eyes (I was told at Tekserve in NY the Apple will come out this Fall with a way to make theletter bigger within the application).  Is there a way to save the Font, Size, Outline Text, placement in the generator that comes with  the capital A at the bottom right of the Viewer?  Many thanks.

    I'm not sure exactly what you're asking, but if you want to save a 'template' of sorts for your subtitles, or other text elements, simply drag one into the Favorites folder in the Browser window.  Then you can drag it to the Timeline anytime you want and change the text as needed.  Personally I use the Boris Title 3D text generator or Photoshop for all text.  Also, I wouldn't be too concerned about what Apple is planning - anything they develop will only be for FCP-X and won't work for older versions of FCP.
    An alternative method that I've used for years is to create a 'Favorites' project in FCP.  In that project I've saved several title styles I've created that I think I might want to use again in the future, along with all of my favorite transitions and filters by applying them to text clips in the Timeline.  Should my preferences become corrupt or the computer need to be replaced or whenever I upgraded FCP in the past, I can easily open my Favorites project file then drag those items to the Favorites folder again.
    As for the small text size, if you're using FCP 7, you can size adjust some of the interface fonts in preferences ... or you can decrease your display resolution ... or get better glasses.
    -DH

  • How to save mixer settings in garageband lessons?

    Every time I open the garageband lessons I have to go to the mixer to set levels for all the tracks. With all levels at full my midi controller is far too quiet relative to the instruction and band tracks. It's frustrating that these levels get set to default every time I open the application. Any way to save them?

    Yes, there is. (You're aware that the individual Track levels have nothing to do with the recording level, only the playback)?
    You can create a template. Set up the Project the way you want it then save with whatever name you like. Then each time you record you open the template and immediately do a SaveAs for your new project.
    In fact, for '09: http://www.bulletsandbones.com/GB/FAQPages/AddTemplates09.html

  • How to save audio file in memory card

    I am developing an application for N70 to saving audio file in memory card but it will ive exception Mediexception can nay one give me solution

    User      System.getProperty("fileconn.dir.photos").toString(); to get the desired location for example if you want to store your audio file in default photos folder u make use of above. if u want to store in another location. you have to change the file connection parameter in getProperty method. It may help you
    Use Below links:
    http://developers.sun.com/mobility/midp/articles/mmapioverview/
    http://today.java.net/pub/a/today/2005/09/27/j2me4.html

Maybe you are looking for

  • How do I use the remote wipe feature for file vault 2 / lion?

    I tried to find a preference panel. I know that for the ios you have to link/setup your device. I tried the find my iphone web site to see if my computer was listed there and it isn't at the moment. Is this new lion feature only available later with

  • Error in E-rec web Service and BSP

    Hi Folks We are facing an issue with Requisition Management in E-rec. A workflow is triggered for requisition management and goes to approver. The workitem does not appear in the UWL of the user however when we monitor the log, it shows the workitem

  • Putting a space in a password?

    I am not giving away much here, but my skype password has one or more spaces in it and I have no intention of avoiding the use of spaces in future passwords. However on my Samsung TV the Skype app uses the *wrong* on-screen keyboard and a space is no

  • No Modem - How to connect Via Dial UP?

    as there is no modem in the mac book pro computers, how can i configure it to use while on holiday where the only connection is a dial-up? is there any way i can use an old airport base station i have as a modem to go through a dial up? any informati

  • How do i migrate actions and presets to CS6?

    Is there a way to migrate actions and presets from CS5.1 to CS6 yet?