Apple ID:digits space less before @ and more after

My mobile got wet(soaked) 6 days ago and after we restored the phone we faced with a problem. Because of the Find my Iphone app. its needed to log in with my Apple ID and password, the only problem is the @(in the e-mail address) shifted to the left with one digit, so we can not log in. The only problem is , we cant continue without checking in to my Appple ID. How can we solve this problem?

This was resolved by repair disc

Similar Messages

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Apple TV (2) name, AirPlay dropouts and more.

I have 2 Apple TV 3's, each with a unique name. One located in the lounge, the other in a bedroom. Subsequently each named "Lounge" and "Bedroom".
I have run the same network and devices for almost 2 years, except for the addition of the iPad Air 2 and the iPhone 6. Apple TVs were on OS 6.x until the release of OS 7.x. During the period of OS 6.x i never ever had an issue with AirPlay from any Mac or iOS device. Which include MacBooks, Mac Minis, iPods, iPhones, iPads.
One Apple TV is connected via ethernet, the other is via WiFi (1 wall away which shows full signal when checked each time).
So i decided to update to OS 7.x when it came out and then i have been plagued with problems ever since, through each update 7.0, 7.0.1, 7.0.2 and 7.0.3.
There is three main problems with these 2 devices as a result of 7.x.
1 - Each Apple TV changes its name at random in regards to the number, one might be "Lounge" for a moment, the next it will be "Lounge (2)" or "Lounge (3)" and so on, usually reverting to "Lounge (2)", either during use or sleep mode.
2 - 90% of the time they will not wake from sleep for the AirPlay function from iPhone 6 on iOS 8.1.3, iPad Air 2 on iOS 8.1.3 or Mac Mini on Yosemite 10.10.2
3 - When it finally does wake, there are constant AirPlay drop outs, most of the time the AirPlay link will drop and some times disappear off the AirPlay devices list right afterwards.
Both Apple TVs produce the same issues, time and time again, i have restored them completely twice each, i have had one replaced for these issues under warranty, yet these issues still remain.
I have tried them on 4 different networks, i have even replaced my modem/router as part of this problem, and still these issues remain.
I even set up via a test with a personal hotspot from one of my iPads, so all i had was an Apple tv, iPad and iPhone on this wifi hotspot, the same issues were present there also.
During this time i have had iPad, iPhone and Mac complete restores for other issues which rules out issues with them i would like to think.
I have even tried AirPlay stability from my older iPhones, iPads and iPhones on iOS 6 and 7 - the same issues are present there also.
I have had many many cases with Apple Care opened, each case gets me no closer to solving generally because the "Senior Advisor" appointed to the case never responds to me after getting off the phone, despite them emailing me with their contact details to "follow up the case" so i don't feel any more efforts there will get me any closer at this point.
I have exhausted many options with no success.
Does anyone else have these same issues?
Has anyone ever found a fix?
Has anyone got any other methods of diagnosing the root cause of this?
I would love any info on this, I'm at my wits end with AirPlay.

Hello, I'm having the same issues using Beamer (one of the best apps ever created) and my Apple TV.
I’m using the latest versions of Beamer, Apple TV and OS X. It’s some weeks that when I drag a movie into Beamer it doesn’t connect automatically to my Apple TV as before: instead, I have to click the Share button and select the Apple TV, then everything goes fine as usual. I haven’t changed any settings, so it should “Connect and Pause” automatically as before.
I’ve also noticed that my Apple TV’s name displayed in Beamer when I click the Share button has changed from the original one (“Miller Apple TV”) to “Miller Apple TV (2)”. I don’t know why there’s this (2) in the displayed name. It’s like Beamer sees 2 Apple TVs named the same way and so it has to add (2) to the other one. But there’s only this Apple TV and the name of the Apple TV itself is always “Miller Apple TV”.
These 2 things (auto-connect not working any more and (2) added to Apple TV’s name) have happened together. It’s like Beamer doesn’t connect automatically anymore to “Miller Apple TV” because there’s another Apple TV named the same way and so it doesn’t know where to connect. I'm in touch with Beamer support but after looking your post I'm now thinking that the problem is more related to the Apple TV than to Beamer.

Space disappears before and after numbers during epub fixed layout conversion

Created .indd file using InDesign CC 2014 and converted to epub fixed layout format. Everything is correctly converted -- EXCEPT that every number (date, address, single number in text) is stripped of its space before and after. The indesign file is correct and spaces are all present correctly. Any thoughts? Could it have to do with fonts (using open type features such as contextual alternates with Figure style set to Proportional Oldstyle)? Quick help would be appreciated -- on a deadline as usual!
Thanks,
Kate

<moved from Adobe Creative Cloud to InDesign>

Missing space characters before and after span element (TLF 2 with Flex 4.1)

It seems there's a bug, I reported it at
http://bugs.adobe.com/jira/browse/SDK-29367 .
(I wasn't able to specify "TLF" in the "Components" dropdown, that's why I'm posting the bug report URL here in the TLF forum.)
Tobi

I think the problem may be that you have "ignoreWhitespace" on the XML object set to true, so the spaces at the start and end of elements are being removed. Try setting it to false.
- robin

How can I make my Blue Skies less turquoise and more blue?

I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?

Instead use the quick selection tool (it works the same way for selecting the area) then go to layer>new adjustment layer>hue/saturation and use the sliders to get what you want.

Audio problems and more after updating to 10.4.3

After taking an OS X update to 10.4.3 from 10.4.2, I've got static instead of audio. This happens no matter what program I'm using: Bias Peak 4.14, iTunes 6.0.1, Apple DVD Player 4.6, QuickTime 7.0.3. I'm even getting static on system sounds (empty trash, delete file, etc). If I open 'Sound' in System Prefs, I'm treated to continuous static...
My sound card settings have not changed - it's an M-Audio Audiophile 2496 running driver version 2.0.4. I've tried contacting M-Audio tech support but they're closed on weekends.
Everything was ok before I took the update. Now i've got the static and other weird problems as well:
If I try to play a .vob file from a commercially pressed DVD using VLC Media Player, I get the following error message "read failed - permission denied". Anything from a recordable DVD is fine (except for the audio).
If I try to backup any file from a commercially pressed DVD, the file doesn't copy and an error message appears: "The operation cannot be completed because you do not have sufficient privileges for some of the items". I double-checked with a DVD that I had previously backed up successfully using the same method and now it doesn't work.
Any thoughts or suggestions will be most welcome.

This was resolved by repair disc

Apple Mail: Lost all Mail accounts and emails - after reboot - how to recover?

Here is what happened:
upgrade to 10.8.4.
macbook air froze
I held down power button
reboot took a looong time ... I nearly thought the little "meter" on the grey screen was stuck. But it finally came through:
I then logged in as usual
opened Mail
and nearly died, since all my 7 mail-accounts were gone + all emails gone
except mobile me account
tried restarting, restart mail.
mail crashed almost immidiately upon opening.
then I did what linc davis said in https://discussions.apple.com/message/22477277?tstart=0#22477277?tstart=0 and mail started anew, and now Mail doesn't crash straight away.
It seemed to import my mobile me mails, but comes up with the "!" sign next to my mobile me account and: "There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.The server returned the error: The connection to the server “p01-imap.mail.me.com” on port 143 timed out."
I have verified that username and paswword are correct and saved in preferences.
But anyways; thanks to another post from you elsewhere I have located my 7 mail accounts in subfolders to something called the V2 folder. There are 6 POP accounts each in a folder and one I think is called EWS.
So: How to I restore these POP accounts in Apple Mail and reimport all my (vital) emails from the last two years?
phew, I have loved working in mac OX for as long as I remember ... but this experience, I could have done without.
I really, really hope some genius can help out. Thanks

Mail isn't showing your eMails correctly or what?
Might try this before we restore anything...
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ does not exist.

Before and After Program Installation Checklist?

I have read various posts with various basic problems and solutions to get Premiere Elements functioning without too many glitches to begin with. I was wondering if there was a post with a list of the most common problems and fixes before and immediately after installing the program.
For example:
     Make sure the computer has enough resources to run the program ie processor speed, memory, hard drive space etc.
     Install the program and any patches/updates
     Delete the Bad Drivers txt file
     Disable Background Rendering
     Disable the Organizer
     Update or Roll Back Video Card Drivers as necessary
     Etc.
These aren't in any kind of order. I know there are more I've left out but there seem to be the same common basic problems with most of the versions of PrE just to get the program to function on a basic level. Sorry I wish I could be more clear on the matter. I am having glitches with the program and was thinking of reinstalling it, but can't remember all of the tidbits to do over again after I reinstall. If I had a list of the most basic things such as some of the items above which I have done after my first install, I might not have to re-read a bunch of posts.
      I'm sure you guys have a list of this stuff in your heads from all of your usage of the program (or reinstallation) and would apply the fixes after installing the program before you even start to use it. What would these basic fixes be?
Thanks

For general Adobe program installation, I have compiled this Tips & Tricks article: http://forums.adobe.com/message/3419692#3419692
In his PrE books, Steve Grisetti has a very useful set of appendices on setting up one's computer, to run PrE as smoothly, as possible. I find his tips to be very useful.
Good luck, and I am sure that others will have more thoughts on this.
Hunt

How do I change the paragraph spacing before and after paragraphs in Pages for iOS

Being experienced in writing technical documents, I would like to know if there is any way I can setup paragraph styles with a specific spacing before and/or after paragraphs in Pages for iOS. You can do this in the normal Pages for Mac OS. Setting line spacing in Pages for iOS is not a very accurate way of formatting a document so that it looks good on a page.

Hello James
I have realised this, but this is a long winded way of doing things and inconvenient if you want to create a new document using an iPad. To me paragraph spacing is one of the essentials when creating documents. It makes a document more readable and look more professional. For Apple to miss this out of iOS Pages is a huge error. Pages should be similar across all platforms where you can use Pages which will greatly overall compatibility, especially if you are exporting to other formats.
Regards
Schof

Management of memory space - using totalMemory() and maxMemory()

I'm writing an app and applet which if "users" select too many images to display would easily create an java.lang.OutOfMemoryError. When loading images, I can used totalMemory() and maxMemory() to see what's being used and available before and/or after loading an image.
Is there a desirable "headroom" between totalMemory() and maxMemory() for "normal" JVM operations? In the case of the applet, there should be few net new objects created once the applet starts besides the images cached based on their selections.
My thinking is to limit the total memory available for image caching based on the the difference maxMemory() - "headrooom" - "application base object totalMemory()"
TIA,
Roy

RoyEpperson wrote:
I understand profiling the application to see what demands it has. Assuming the app/applet logic is not creating and disposing new objects, how much space does the JVM need to do it's "housekeeping"? or is that already allocated on initial invocation of the application?It isn't as simple as that.
I have gotten the VM (1.5 I believe) to start with something like a 3meg (somewhere around there) max heap. Although interesting that isn't usable.
When the VM loads something, like the regex api it is hard to say what actually gets loaded when. And when you create instances it takes more space as well.
So if you just want to guess then I would start with 32meg.

How to create a loop to run total of records for before and after unconstant date

Post Author: Ann2
CA Forum: Formula
Here is the data sample:
ID period code date
1 00 I    01/01/1999
1 00   Z   01/02/1999
1 00 G   12/05/1999
1 00 M   01/01/2000
There are many students with many periods and many codes. I need to save a date when code = 'G' and count separateley records per student/period 2 times - before and equal that date and after that date, so in the end for period 00 I will have 2 values: 3 (before) and 1(after).
There are periods from 00 to 08. I am counting students abscencies before and after warning letter was sent (code G).
The result data should look : 00 01 02 03 04 05 06 07 08              00 01 02 03 04 05 06 07 08     Total
                                            3 0   0   0   0   0   0   0   0                 1 0    0   0   0   0   0   0   0        4
Please help me.
Thank you.
Ann2

Post Author: Ann2
CA Forum: Formula
Thank you for your answer, but I do care about the date the 'G' happened, because I need to reset count.
The logic behind is this:if a student absent for more than 8 times per period - the letter will be sent out to the parents , that will be code 'G' with period '-1' (it may happen that there will never be code 'G' , but I need to track all absencies). Once the letter is sent, the count starts over (the count starts over the next day after code 'G'). The absencies which happened before or the date the letter sent should count toward 'previous' abscenices, all other - absenices after the letter.
So basically I need total per period and total per period before or the day with code 'G'. Running total with reset with formula code = 'G' does not work.
I created a formula field which has global date (when code 'G' happenned) and it says if globaldate >= periodDate then date (1900,01,01) else (2100,01,01) and that formula is ok, but I can not use it in running total or can not create group on it and insert total.
Please help me with this. Thank you.
Ann2

HT5624 How do I update my Apple ID on iPad and iPhone after changing it?

How do I update my Apple ID email address on iPhone and iPad after changing the email but not password. I have verified my new email on iPhone iPad and iMac but settings on all for iCloud still show my old email address. I can't use anything now that needs my Apple ID

Hello there, Chivs86.
From what it sounds like you are wanting to sign out of iCloud with the "old" ID and sign in with the new. The following Knowledge Base article should help you with that issue:
iCloud: Features that work with one account at a time on iOS 5 and OS X Lion or later
http://support.apple.com/kb/TS4020
Specifically:
To change a secondary account to a primary account
iOS 5 or later:
Tap Settings > Mail, Contacts, Calendars.
Delete the secondary account.
Tap the Back button.
Tap iCloud.
Delete the primary account.
Add the secondary account that you want to be your primary account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Two Apple IDs... deleting one and content lost?

I have a several year old Apple ID that I must have created a while back, but didn't use much as I only had an iPhone... but it has my current gmail email address
When I got my new iPhone, ipad and Mac, I couldn't rember what my Apple ID was (nor did I realize how difficult it would be resolve this issue in the future) amd created a second ID with an old comcast email account. We are now getting rid of comcast and want to change the Primary email address for Apple ID to my current email / gamil account.... but I get an "email already in use" error message
Understand that I can not combine the content, purchased into a single ID but I am OK loosing the content, the price to pay to work around a difficult software.
How do I delete the apple ID with a gmail account and then after I delete that I can change the email addres on the comcast account back to my primary gmail account? Is there a way to see the amount of content associated with my two apple IDs?
Thanks
Rob

You can't delete an account, but you can try logging into the old account via this page and change it's primary email address to be something else : http://appleid.apple.com - you can then try updating your new account to have that new email address on it.
You can see the purchase history of an account via the Store > View Account menu option on your computer's iTunes - if you log into your account via that then on your account's page there should be a Purchase History section with a 'see all' clickable link next to it.

When I export photos to Iphoto slideshow they crop more after each play. Is this common?

When I export photos to IPhoto slideshow they crop more and more after each play. Is this common?

No. In fact, I've never heard of it before.
It might help if you could give us some details. What do you mean by "export photos to iPhoto Slideshow"? DO you mean you're adding photos to a slideshow in iPhoto? Or hat you created a slideshow in iPhoto and exported that to the Finder?

Apple ID:digits space less before @ and more after

Similar Messages

Maybe you are looking for