Apple ID has already been created

When trying to download or update an app I already have I'm getting the prompt "An Apple ID for (my Apple ID) has already been created." Options given are "Cancel" or "Retry". Resulting in me not being able to download or update. Please help.
Using same Apple ID on multiple devices.

Did you try a Soft Reset of your iPhone ...holding Seep button and Home button at the same time until Apple logo appears then waiting for your Lock Screen?

Similar Messages

Simple Entity Bean JWS fails: Connection has already been created in this tx context

I am new to Weblogic Workshop 8.1, and trying to create an EntityBean from a pre-existing
database table.
I get an error that indicates the JWS is using the default cgPool rather then
my new pool for some transaction.
I added my database (DB2) pool and data source, and then created an entity bean
using "New Entity Bean from database table.
I then wrapped this Entity Bean in a control and generated a JWS.
When I run the JWS and execute FindByPrimaryKey, I get the following error:
Submitted at Friday, April 2, 2004 11:07:30 AM CST
<error>
<faultcode>JWSError</faultcode>
<faultstring>Couldn't get connection:
java.sql.SQLException: Connection has already been created in this tx context
for pool named cgPool. Illegal attempt to create connection from another pool:
ATGW_POOL
java.sql.SQLException: Connection has already been created in this tx context
for pool named cgPool. Illegal attempt to create connection from another pool:
ATGW_POOL
at weblogic.jdbc.jts.Driver.getExistingConnection(Driver.java:410)
at weblogic.jdbc.jts.Driver.connect(Driver.java:141)

I am new to Weblogic Workshop 8.1, and trying to create an EntityBean from a pre-existing
database table.
I get an error that indicates the JWS is using the default cgPool rather then
my new pool for some transaction.
I added my database (DB2) pool and data source, and then created an entity bean
using "New Entity Bean from database table.
I then wrapped this Entity Bean in a control and generated a JWS.
When I run the JWS and execute FindByPrimaryKey, I get the following error:
Submitted at Friday, April 2, 2004 11:07:30 AM CST
<error>
<faultcode>JWSError</faultcode>
<faultstring>Couldn't get connection:
java.sql.SQLException: Connection has already been created in this tx context
for pool named cgPool. Illegal attempt to create connection from another pool:
ATGW_POOL
java.sql.SQLException: Connection has already been created in this tx context
for pool named cgPool. Illegal attempt to create connection from another pool:
ATGW_POOL
at weblogic.jdbc.jts.Driver.getExistingConnection(Driver.java:410)
at weblogic.jdbc.jts.Driver.connect(Driver.java:141)

Java.sql.SQLException: Connection has already been created in this tx context for pool named adrxSYBDEV07

I keep getting the following error when I try to use 2 different java.sql.Connections
from 2 different database connection pools in my message ejb. The message ejb
uses container managed transaction. The 2 connection pools point to different
Sybase Servers.
Any help will be much appreciated !!!
java.sql.SQLException: Connection has already been created in this tx context
for pool named adrxSYBDEV07. Illegal attempt to create connection from another
pool: Sybbev07Pool JDBCUtil > getConnection()

Hi Eddie,
"Eddie Baue" <[email protected]> wrote in message
news:3ddbf74f$[email protected]..
I keep getting the following error when I try to use 2 differentjava.sql.Connections
from 2 different database connection pools in my message ejb. The messageejb
uses container managed transaction. The 2 connection pools point todifferent
Sybase Servers.In order to access more then one database base within
a TX you need to have TXDataSources backed by XA
connection pools...
Regards,
Slava Imeshev

SQLException: Connection has already been created in this tx context for...

I get this Exception when i try to do persistance in one Oracle database after i received data from another Oracle database
2010-08-24 10:41:44,185 2497 [[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.btick.ejb.db.MauSqlMapClient - excepcion al intentar ejecutar statement [CLIENTS.RegistrarMovimientos]
java.sql.SQLException: Connection has already been created in this tx context for pool named ConnPoolClient. Illegal attempt to create connection from another pool: ConnPoolStore
     at weblogic.jdbc.jts.Driver.getExistingConnection(Driver.java:608)
     at weblogic.jdbc.jts.Driver.connect(Driver.java:127)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:339)
     at com.ibatis.sqlmap.engine.transaction.jdbc.JdbcTransaction.init(JdbcTransaction.java:48)
     at com.ibatis.sqlmap.engine.transaction.jdbc.JdbcTransaction.getConnection(JdbcTransaction.java:89)
     at com.ibatis.sqlmap.engine.mapping.statement.GeneralStatement.executeQueryForObject(GeneralStatement.java:104)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:566)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:541)
     at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForObject(SqlMapSessionImpl.java:106)
     at com.ibatis.sqlmap.engine.impl.SqlMapClientImpl.queryForObject(SqlMapClientImpl.java:83)
     at com.btick.ejb.db.EntelSqlMapClient.queryForObject(MauSqlMapClient.java:150)
     at com.btick.ejb.archivos.SyniverseBean.persistData(SynBean.java:127)
     at com.btick.ejb.archivos.SyniverseBean.persist(SynBean.java:121)
Can u help me how to solve this?
I tried using differents drivers.
Thanx in advance!

Hi Mgaldames,
Please refer to : http://weblogic-wonders.com/weblogic/forums/ejb-webservices-dev/#comment-1620
Thanks
Jay SenSharma

Connection has already been created in this tx context

Hi All,
I am experiencing this problem and I am not able to find the solution for this.
Please help.
I have stateless EJB ('REQUIRED') and within that I have many EJB's using 'SUPPORTS'
as transaction and in the flow I am also calling DAO object which invokes JDBC
( using TXDataSource) call from different Datasource from the one above EJB.
I get SQL EXception as
"SQLException while getting DB connection : Connection has already been created
in this tx context for pool named oraclePool. Illegal attempt to create connection
from another pool: sybPool "
I am not able to figure out why this error is coming. Any help will be appreciated!
Regards
SH

Hi all,
I am facing this same problem
i am using database for weblogic integrator
Pointbase
and oracle for my system.
I didn't get the what u meant by XA driver
Regards,
Cleophus Pereira
"Slava Imeshev" <[email protected]> wrote:
Hi Sanjeev,
Slava
"Sanjeev" <[email protected]> wrote in message
news:3d6f55bd$[email protected]..
Hi All,
I am experiencing this problem and I am not able to find the solutionfor this.
Please help.
I have stateless EJB ('REQUIRED') and within that I have many EJB'susing
'SUPPORTS'
as transaction and in the flow I am also calling DAO object which invokesJDBC
( using TXDataSource) call from different Datasource from the one aboveEJB.
I get SQL EXception as
"SQLException while getting DB connection : Connection has alreadybeen
created
in this tx context for pool named oraclePool. Illegal attempt to createconnection
from another pool: sybPool "
I am not able to figure out why this error is coming. Any help willbe
appreciated!
Regards
SH

Connection has already been created in this tx ctxt for pool named cgPool

Hi,
I am getting the below error when I try to call a DB Control( pointing to DB2) when I run my Process in Weblogic WorkShop( BEA WeblogicWorkShop8.1.4)
<b>Caused by: java.sql.SQLException: Connection has already been created in this tx context for pool named cgPool. Illegal attempt to create connection from another pool: Mypool</b>
I even tried changing MyPool as XA- Connection Pool.
I set the cgPool to Emulate 2phaseCommit- non XA.
Still the error is occuring. I am not able to call any of my methods of the DB Control.
MyPool is pointing to a DB2 Server.
If Any of you guys have got a solution . Please post the solution on how to solve this problem!!
Waiting for the Response
Regards
Ravi Upasi:O

Hi,
WebLogic Workshop uses a built-in connection pool, cgPool, to track conversation state. If you create a Database control that uses a data source created on a different connection pool, you may get an error that stating that you already have a transactional context created in the first pool (the one that Workshop is using to track state), and you cannot use data sources from two different connection pools within the same transaction. You can solve this problem by using a transactional (XA) driver.
Solution: Please use a XA driver for your application pool and the error should go away.
Thanks
Vimala

Connection has already been created in this tx context for pool named cgPoo

Hi all,
First of all apologies, as I know there have been multiple posts on the above issue but I have not as yet been able to resolve the issue.
I am using weblogic 8.1 sp3 to develop a portal. As you are aware on the domain creation a connection pool cg pool is created. I am using an oracle driver (oraclei 8.1.7 thin ).
I have to create another jdbc ( clin_live )connection pool, which I also use the oracle 8 (oraclei 8.1.7 thin) and when I create the data source ( clinPool) for this I check the "emulate 2 phase commit".
The connection pool and the data source both deploy ok but when I use the clinPool datasource I get the following error.
Failure=java.sql.SQLException: Connection has already been created in this tx context for pool named cgPool. Illegal attempt to create connection from another pool: clin_live [ServiceException]>
From the previous posts I understand that weblogic will let you have only one non-xa connection pool and cgPool must be non-xa.
In trying to resolve this I have created the pool using the oracle thin XA driver without much luck.
If any one has a solution I would be very grateful.
Many thanks,
Niambh

Niambh,
you can have only one non-xa datasource participating in a transaction. Emulating or faking XA means only that WLS does first all the operations for the XA resources, then the one non xa, and based on the result of this either commit or rollback.
So obviously only one resource can "emulate 2PC).
But there can be as many non XA db connections as you want, as long as they are not participating in the transaction.
Check your datasources.
I think the reason to use non-XA driver and "emulate 2PC" for Oracle is mainly the poor performance of the XA driver prior to 10g.
Check also, if your Oracle database is XA enabled at all. I have seen some issues with customers, where the necessary PL/SQL packages have not been installed and therefore the thin XA driver did not work.
-Kai

Connection has already been created in this tx context for pool

Hello
          I can´t use WLS 6.0 I must use WLS 5.1. So I can´t to use distributed
          transactions.
          So that, Can I to simulate this situation???
          Client code:
          method
          UserTransaction.begin
          class1.create
          class2.updateDatabaseOracle1
          this.comit();
          Exception
          this.rollback();
          method commit
          class1.commit();
          class2.commit();
          UserTransaction.commit
          methdo rollback
          class1.rollback;
          class2.rollback;
          UserTransaction.rollback
          class1
          create
          EJBCreate
          commit
          EJB.putData
          rollback
          EJB.remove
          I get this Error:
          "Connection has already been created in this tx context for pool
          named pool1. Illegal attempt to create connection from another
          pool: pool2"
          Please Help How can I do it?
          Miguel Lopez Montero
          Soluziona Servicios Internet,Spain


Niambh,
you can have only one non-xa datasource participating in a transaction. Emulating or faking XA means only that WLS does first all the operations for the XA resources, then the one non xa, and based on the result of this either commit or rollback.
So obviously only one resource can "emulate 2PC).
But there can be as many non XA db connections as you want, as long as they are not participating in the transaction.
Check your datasources.
I think the reason to use non-XA driver and "emulate 2PC" for Oracle is mainly the poor performance of the XA driver prior to 10g.
Check also, if your Oracle database is XA enabled at all. I have seen some issues with customers, where the necessary PL/SQL packages have not been installed and therefore the thin XA driver did not work.
-Kai

Can't log in. Says account has already been created with this username.

Try to log in and it says account has already been created with this username, and yes I am under the log in tab and not the create an account tab. I tried to reset the password then and it told me that the form has expired. Don't know what to do about this.

Hi there welcome,
Could you try to clean your browser cache? If that doesn't help, then try incognito mode or a different browser.

FB, LinkedIn and Twitter Error: Account has already been created

I just bought my BlackBerry Classic from AT&T. When I tried to set up my social media accounts - FaceBook, LinkedIn and Twitter by signing in, each of them said there was an error completing the set up and I should try again later. When I returned later I got error "This account has already been created" for each of them. I deleted FB app and reinstalled it but got the same error. I made sure I updated each app to the latest version but no luck.
Has anybody else had similar problems?

No I don't see those accounts in settings >> accounts. I only see email accounts there.

Fried my hard drive. Trying to authorize new computer (store authorize computer). I get a box that says the account has already been created.

Fried hard drive and replaced computer. Trying to authorize my new computer to download music on the account I created with old computer. I get a box that says the account hs already been created. I know that. I created it. Has anyone else out there run into this before?

Unless the process has changed, you won't be able to do that (I've been there, done that...). You can either opt to de-authorize all (doesn't matter if it's only one) which you're allowed to do once a year, or, if you don't want to "waste" that option, contact iTunes support.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

HT201441 I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G.

How do I fix this error? 'This invitation to receive assigned content has already been accepted by another apple id'

I'm trying to send apps to the ipad.
To use VPP it says the user need to except the inventation.
WHen they try to, they get this error "This invitation to receive assigned content has already been accepted by another apple id"

I had this same issue as well.
I ended up calling Apple Support about the issue. After being on the phone for an hour and trying every thing to fix it, we determined that a certificate was messed up and the server had to be set up from scratch again. I had to reinstall the OS on the Mac Mini Server then reinstall the server app. After setting things back up again everything for user VPP enrollment and pushing apps works now.
My server was still in the testing stage so it wasn't a big deal for me to do.
Did you try removing the user from the program under the user account's About tab in profile manager? Or does the user not show that they're actually enrolled? (Mine wasn't showing they were enrolled but gave that error message you stated)
There is a way to remove Profile Manager content from the server using a Terminal command, i'd try to do that before completely re-doing the server.

The process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.

Hi
he process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.
Command executed: "C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe" -command "&G:\SCOM\SCOMModule\Notification\SMS.ps1 -scomalertid:'{c5a013e7-5408-468a-9b04-febab33cc56d}' -alertname:'Common Primary Database TableSpace
Threshold Alert' -alertdesc:'TableSpace TEMP FreeSizePercent:0.4375\n' -alertstate:'Closed' -alerttime:'7/26/2014 1:55:19 PM' -Priority:'1' -Severity:'2'"
Working Directory: g:\SCOM\SCOMModule\Notification
One or more workflows were affected by this.
Workflow name: Subscription852fbf70_40eb_450c_874d_46b631ca1352
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group:******
Please help me
Thanks

Hi,
the RMS is "Root Management Server". When you install first management server it becomes RMS. The RMS is relevant in SCOM 2007x management group. You can identify which server is RMS in administration console under management server view. Look for instance
with "yes" value in "Is RMS" column.
If you have SCOM 2012x version management group create sugested registry entrys on all management servers (MS) which executes command channel.
This will surely solve your
problem.
Regards,
Ivan

Apple ID has already been created

Similar Messages

Maybe you are looking for