Apple ID password not recognized on MacBook Pro

When initially setup, iCloud recognized my Apple ID and PW on my MacBook Pro; now as of today, it registers the password as invalid, so I reset the password using Apple password 'genie': iPhone and iCloud (web) both recognize my (new) password as valid, Apple Support recongizes my password, but iCloud (MacBook Pro) does not.
There seems to be no recourse w/in iCloud to go any further.
Any Suggestions? other threads?
TIA

Hi Laramar,
You may need to change the information on your iPhone:
iPhone User Guide:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
View and edit your account: Go to Settings > iTunes & App Stores, tap your Apple ID, then tap View Apple ID. You can turn subscribe to iTunes newsletters, and view Apple’s privacy policy. To change your password, tap the Apple ID field.
Hope this helps!
- Judy

Similar Messages

My Apple TV is not mirroring my Macbook Pro after I installed OS X Mavericks

My Apple TV is not mirroring my Macbook Pro after I installed OX X Mavericks?

Installing Maverick does not change the hardware requirements.
Did it work prior to installing Maverick?
Does the device meet the hardware requirements?
Supported Macs
AirPlay Mirroring in OS X takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)

IPhone 4s not recognized by MacBook Pro nor iTunes

I am currently running iOS 6.0.1 on my iPhone 4s and OS X 10.9.4 on my MacBook Pro Retina Late 2012. I recently reformatted my computer by means of a bootable OSX installer and I did a completely clean install. For some reason, my iPhone is able to charge, but not recognized by my computer nor iTunes at all. Nothing comes up.
I have followed the directions in the following:
http://support.apple.com/kb/TS1591?viewlocale=en_US
and
https://discussions.apple.com/message/24169239#24169239#24169239
Neither solution seems to be working. I have done the following:
reinstalled my iTunes multiple times
reset my networking on my iPhone a few times
restarted my computer
updated all my software
checked to make sure USB cables work
tried multiple iPhone charging cables
I'd greatly appreciate some guidance in regards to this. Thanks!

Ralph Landry1 wrote:
When you say a bootable OS X installer where did you get the installer? Is it one you created yourself?
You might want to try restarting the MacBook Air holding the Command and R keys. From Utilities on the menu bar, choose Install Mac OS X. That will reinstall using an installer from Apple. Install and see if that changes the behavior.
I did the following from this website:
http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
Option 1: Use createinstallmedia
Hidden inside the Mavericks installer is a Unix program calledcreateinstallmedia, provided by Apple for creating a bootable Mavericks installer. If you’re comfortable using Terminal, it’s a relatively simple tool to use. The program assumes your account has administrator privileges.
Note: This method does not work in Snow Leopard. It works only in Lion, Mountain Lion, or Mavericks. (The resulting installer drive will let you install Mavericks over Snow Leopard, but you can’t create the installer drive while booted into Snow Leopard.) If you need to create a Mavericks install drive while booted into Snow Leopard, you should use the Disk Utility instructions, below.
Download the Mavericks installer from the Mac App Store and make sure it’s in your main Applications folder. (This means that if you followed my advice to move the installer out of your Applications folder, you’ll have to move it back, at least temporarily. The Terminal command I’m using here assumes the installer is in its default location.)
Connect to your Mac a properly formatted 8GB (or larger) drive. Rename the drive to Untitled. (The Terminal command used here assumes the drive is named Untitled.)
Select the text of this Terminal command and copy it:sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Launch Terminal (in /Applications/Utilities).
Paste the copied command into Terminal and press Return. Warning: This step will erase the destination drive or partition, so make sure it doesn’t contain any valuable data.
Enter your admin-level account password when prompted.
The Terminal window displays the progress of the process, in a very Terminal sort of way, by displaying a textual representation of a progress bar: Erasing Disk: 0%... 10%...20%... and so on. The program then tells you it’s copying the installer files, making the disk bootable, and copying boot files. Wait until you see the text Copy Complete. Done. (see the screenshot below), which could take as long as 20 or 30 minutes, depending on how fast your Mac can copy data to your destination drive.
You now have a bootable Mavericks-install drive.

IPod Video 5G Not recognized on MacBook Pro 17 Intel

My Ipod video 5G is not showing in iTunes or on my desktop. Not showing in System Profiler either. The ipod does charge however. I'm frustrated and stumped. I've tried the 5Rs a number of times but can't even get to the "Restore" portion. iPod works fine when not connected to my MacBook Pro. I also have a Nano and a 3G ipod (firewire) that both work fine and are recognized and update without a problem.
Anyone have an answer to getting the iPod video recognized....? Apple?
MacBook Pro 17" Intel Mac OS X (10.4.8) I'm running OS X 10.4.8 and iTunes 7.0.2

Have you tried the steps in this article?
iPod missing in iTunes and Mac desktop
-Kylene

IPod (almost) not recognized by MacBook Pro

Hi,
My MacBook Pro recently stopped recognizing my old 3rd generation iPod. I've been connecting the iPod to the computer using a FireWire cable with no problems for almost six months now, but something has suddenly changed. I used to be able to synch my iPod with iTunes no problem. Now, the iPod doesn't appear in iTunes, nor does it appear on the desktop. The only place where I'm able to see any evidence of the iPod is if I go to the System Profiler. There, under the FireWire section, it indicates that the iPod is connected.
The iPod itself is also evidencing some problems. When I try to start the iPod, the folder icon flashes on the screen, indicating that it can't find any of the files that used to be on the iPod hard drive. If turned on once, the iPod will continually restart on its own until the battery is discharged. If I plug the iPod into the computer, the iPod says "Disk Mode, Okay to Disconnect." The battery is also charged as usual.
This problem has me pretty stumped, since the iPod was working fine with this system for so long. Another difficulty is that none of the Apple support documents seem to directly address this situation. Most pages usually tell me to either reset the iPod using iTunes (not possible in this case) or reset it using the iPod Updater utility, which no longer seems to be available for download from the Apple website (the download link just takes me to the iTunes website).
Any suggestions would be appreciated. Thank you,
Adrian

Does anyone know at least if the iPod updater is still available? It used to appear on my computer after a software update every now and again, but I deleted it as soon as I used it to get my iPod software up to date. I don't know if this tool would be able to recognize the iPod if it doesn't show up in iTunes or on the Desktop, but I figure it may look a little bit harder.
Thanks,
Adrian

Striped RAID not recognized by Macbook Pro

I have a pair of external firewire 250GB drives that I had configured into a striped RAID set on my Powerbook Titanium. I recently purchased a Macbook Pro. When I plug the drives into the new machine, they are not recognized and the array (and I use the term loosely since it only refers to a pair of drives!) will not mount. When I launch DIsk Utility, the drives appear in the list and are offline. I cannot find a way to bring the thing online.
When I created the RAID, I used Mac OS Extended (Journaled) format. The disk set still works fine on my Powerbook and checks out fine with Disk Utility on that machine.
Does anybody have any suggestions on how to use my striped set on my new machine?

Hi, P. J.
Unfortunately, I don't have an answer for you, but — seeing as how your question has gone unanswered — I thought I'd offer the following hypothesis: I suspect it may have something to do with the different partitioning schemes used by PPC and Intel-based Macs.
Theoretically, "Any Macintosh computer running Mac OS X 10.4 and later can mount GPT-partitioned disks," per "Technical Note TN2166, "Secrets of the GPT." However, the RAID you created on your PPC-based Mac used the APM (Apple Partition Map) scheme.
Perhaps all the bugs haven't been worked out, esp. concerning RAID. For example, there is a known issue that some Intel-based Macs cannot boot from RAID volumes.
You may want to try your question on the MacBook Pro Discussion to see if others with your same Mac have had better luck. I'd also suggest providing more details (manufacturer, make, model, etc.) of the FireWire drives you've used in the RAID. If both are from the same manufacturer, then you might also want to check with the manufacturer to see if they've had similar reports.
One option, albeit a good bit of work, would be to backup the contents of the RAID to another drive, then recreate the RAID on your Intel-based Mac, restore the data, and see if that works on both your PPC- and Intel-based Macs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Wifi password not working on MacBook Pro

Wifi password not working
I got a MacBook Pro today. The previous owner had Apple wipe it clean for the new owner, me. When I first tried putting my wifi password in, I wasn't remembering exactly what it was, so I tried many different possibilities. Since then, I found my password in my office. I put it in, when it asked for it. But, it's not taking it. It just says searching for networks. And, this is after I identified the correct network. So, I am wondering if perhaps after a number of "tries" does it not accept ANY further attempts ? You know like Banking passwords....you get locked out. I'm wondering if I'm locked out?

No, not like a bank timeout.
Open keychain in your Utilities Folder and look for old router password, or delete wrong passwords.
You can always reset your router password to something new that you can remember.

Samsung 840 evo ssd not recognized in macbook pro 2011

Hello Apple Support Forum,
I am trying to upgrade the hdd in macbook pro for ssd. I've formated the SSD in Mac format in another macbook air via USB, and installed the SSD in the main bay. However, after I booted using OS X mavericks usb drive, the OS X installer does not regonize the SSD. Can any one offer some adivce or suggestions? I am pretty sure that the disk is physically installed corrected in the mai bay.
Thanks!

biglizheng,
have you checked to see if your SSD is recognized by your MacBook Pro externally, via USB? If it’s accessible externally, then you could run the Mavericks installer to do a clean install onto the external SSD. It will be slow, since it will be limited by your USB port’s transfer rate, but it should get the task done. Once the external installation process has completed, you can hold down an Option key while restarting your MacBook Pro, and it should list the SSD as one of the drives from which you can boot. If you can boot from it and run Mavericks from it, then the problem could be with your internal SATA cable rather than with the SSD. (HDDs can be more forgiving of faulty SATA cables than SSDs are, which could explain why it didn’t affect your HDD.)

IPhone 4S not recognized by MacBook Pro

Mac OS X Lion - Version 10.7.4
iPhone 4S
Tried troubleshooting all over the internet on this one and have finally given up after countless attempts. Any help here would be greatly appreciated.
So my iPhone 4S works fine with one exception, it will not take a charge or sync on my MacBook Pro anymore. Not sure what I did (or what update did it) but I'd like to fix the issue if possible.
I have an iPod shuffle, iTouch and iPad 2, all of which sync fine on the MacBook Pro.
The iPhone 4S charges in my car, through all wall outlets and is set up on iCloud and syncs fine with iPhoto, iCal, and any purchases made on iTunes. The big reason I need to get this fixed is to move the videos I have on my iPhone onto my MacBook.
I've tried different cords, restarting both the MacBook Pro and iPhone, resetting the iPhone etc. etc.
I'm at a loss other than taking the iPhone and MacBook into an Apple store. I feel like I've read countless threads on this same issue but no real fixes.
Does anyone have a solution?

Thought I would add a quick update.
I tried plugging my iPhone 4S into a different MacBook Pro and no response there either.
Safe to assume it's the phone at this point???
Think I may just take it to the Apple Store if nobody has any ideas.

Mx870 printer not recognized by macbook pro

The network name/password at my office changed recently and I have been unable to print or scan wirelessly to my MX870 since, even after setting up both my computer and my 3-in-1 on the new network. In addition, after deleting the printer in the Printer & Scanner System Preferences, I was unable to add it back in as a printer. It only shows up as a scanner. My computer is a MacBook Pro OS 10.9.5.

When I plug in the iPhone, I get the following in the console.log:
Jul 23 10:59:19 Crainte kernel[0]: USBF: 3331.256 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Jul 23 10:59:31 Crainte kernel[0]: USBF: 3343.257 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Jul 23 10:59:43 Crainte kernel[0]: USBF: 3355.258 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Perhaps the camera device is timing out somehow...
I'm going to drive out to an Apple store to see if they can download the photos for me... and then maybe try a restore...

IPhone Camera not recognized by MacBook Pro

My camera is neither being recognized by Image Capture, nor by iPhoto.
This was working fine (iPhoto auto-launching to download the camera roll) before my vacation, and now I have 1000+ pictures on my iPhone that I want to download.
During my vacation I changed timezones, used airplane mode, etc.
Is there any way to get all of these photos off my iPhone without wiping the entire thing?
The whole phone still works properly, it still takes photos (I'm up to 1094 now).
Thus far I've tried rebooting everything, turning the iPhone off for a while, letting it be plugged into my laptop over night... Nothing works so far.
MacBook Pro Mac OS X (10.4.10)

When I plug in the iPhone, I get the following in the console.log:
Jul 23 10:59:19 Crainte kernel[0]: USBF: 3331.256 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Jul 23 10:59:31 Crainte kernel[0]: USBF: 3343.257 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Jul 23 10:59:43 Crainte kernel[0]: USBF: 3355.258 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Perhaps the camera device is timing out somehow...
I'm going to drive out to an Apple store to see if they can download the photos for me... and then maybe try a restore...

WD Smartware, external hard drive back up not recognized by Macbook Pro

I use WD external hard drive as back up for my Macbook Pro using WD Smartware. All software is upto date but when I plug in my external hard drive it is now not recognised by my Mac. It does not appear in Finder or Disk Utility but it does show up in System Profiler. It has worked fine until now. I have changed the UCB cables multiple times, the external WD hard drive has its own power suppy and other external hard drives work in the same usb port. When I plug the external drive into a PC it is recognised but obviously will not let me use it. When I go to access via the PC it prompts me for the password to open the drive, however when I plug into my Mac, when I click on 'unlock drive' its says that the drive is not locked. The WD Smartware software runs to check the files on my Mac but after categorising them the 'back up' option is not highlighted and it will not access the external WD drive.
How can I access the WD external drive ? System Profiler data is below. Many thanks, apologies for any ignorance and thanks in anticipation of any help !
My Book 1110:    Capacity:     804.4 MB (804,421,632 bytes)   Removable Media:     Yes   Detachable Drive:     Yes   BSD Name:     disk1   Product ID:     0x1110   Vendor ID:     0x1058 (Western Digital Technologies, Inc.)   Version:     20./My Book 1110:    Capacity: 804.4 MB (804,421,632 bytes)   Removable Media: Yes   Detachable Drive: Yes   BSD Name: disk1   Product ID: 0x1110   Vendor ID: 0x1058 (Western Digital Technologies, Inc.)   Version: 20.18   Serial Number: 574341565931323033383539   Speed: Up to 480 Mb/sec   Manufacturer: Western Digital   Location ID: 0xfd130000 / 5   Current Available (mA): 500   Current Required (mA): 2   Partition Map Type: Unknown   S.M.A.R.T. status: Not Supported   Volumes:   Capacity: 700.4 MB (700,448,768 bytes)   Writable: No   BSD Name: disk1s0   Capacity: 32 KB (32,256 bytes)   Writable: No   BSD Name: disk1s0s1 WD SmartWare:   Capacity: 229.7 MB (229,672,960 bytes)   Available: Zero KB   Writable: No   File System: HFS    BSD Name: disk1s0s2   Mount Point: /Volumes/WD SmartWare18   Serial Number:     574341565931323033383539   Speed:     Up to 480 Mb/sec   Manufacturer:     Western Digital   Location ID:     0xfd130000 / 5   Current Available (mA):     500   Current Required (mA):     2   Partition Map Type:     Unknown   S.M.A.R.T. status:     Not Supported   Volumes:   Capacity:     700.4 MB (700,448,768 bytes)   Writable:     No   BSD Name:     disk1s0   Capacity:     32 KB (32,256 bytes)   Writable:     No   BSD Name:     disk1s0s1 WD SmartWare:   Capacity:     229.7 MB (229,672,960 bytes)   Available:     Zero KB   Writable:     No   File System:     HFS+   BSD Name:     disk1s0s2   Mount Point:     /Volumes/WD SmartWare

mjunder Hong Kong
   I use WD external hard drive as back up for my Macbook Pro using WD Smartware.
To be a parrot,.......REMOVE the WD garbageware.
Western Digital warned its users about its OWN software couple months ago.
Remove ANY and ALL WD software products.

HP scanner not recognized by MacBook Pro 17" 2010

New Macbook Pro user (arrived from the factory last week) with OSX 10.6.8. Trying to get my HP scanjet 7400C to work. It's certainly not being recognized. When I look up how to install a scanner in the help it dumps me to the print and fax dialog. No indication in this dialog how to set up or use a scanner. No scan tab. No scanner options at all that I can see.
How do I install a scanner?

Hello Jeff,
I have the same problem trying to connect an HP 7400C Scanner to my MacBook Pro 17" (2011) running Snow Leopard. I tried downloading the drivers from HP Support Drivers (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=59553#N160). The web page indicates that it supports OS 10.3, but does not identify any later version of OSX that is supported. When I download that package, it is not recognized as an installable image.
I am wondering what drivers and support software you downloaded and installed?
Thanks for your help!

Windows-formatted Iphone not recognized by Macbook Pro Itunes

I recently ditched a PC laptop from which I had started using an Iphone and just switched to a Macbook Pro. When I connect my Iphone to the Mac, the Iphone icon pops up on the left hand side, and I'm able to see all the music on the Iphone, but it all appears gray (ie: inaccessible). When I try to drag music to copy from the Mac Itunes to the Iphone, it won't allow me to do so (dragging music onto the IPhone icon does nothing). Similarly, I can't play any music on my Iphone via the Mac Itunes. I am able to sync though, which seems strange. All software is up to date (for Mac OSX, Itunes, and IPhones), and I've tried re-booting several times without success.
I've tried authorizing the computer which does nothing, and unfortunately the Apple support rep wasn't very helpful. I've also tried Googling this issue but can't find any posts addressing to this issue.
I would assume that this has something to do with my Iphone originally being formatted by Windows, and now my new Macbook Pro is having compatibility issues with this? Is there some other software or formatting I need to do so I can copy new music to my IPhone, etc, without clearing out all the music already on the IPhone?
Thanks!

I recently ditched a PC laptop from which I had started using an Iphone and just switched to a Macbook Pro. When I connect my Iphone to the Mac, the Iphone icon pops up on the left hand side, and I'm able to see all the music on the Iphone, but it all appears gray (ie: inaccessible). When I try to drag music to copy from the Mac Itunes to the Iphone, it won't allow me to do so (dragging music onto the IPhone icon does nothing). Similarly, I can't play any music on my Iphone via the Mac Itunes. I am able to sync though, which seems strange. All software is up to date (for Mac OSX, Itunes, and IPhones), and I've tried re-booting several times without success.
I've tried authorizing the computer which does nothing, and unfortunately the Apple support rep wasn't very helpful. I've also tried Googling this issue but can't find any posts addressing to this issue.
I would assume that this has something to do with my Iphone originally being formatted by Windows, and now my new Macbook Pro is having compatibility issues with this? Is there some other software or formatting I need to do so I can copy new music to my IPhone, etc, without clearing out all the music already on the IPhone?
Thanks!

Leopard dvd not recognized by macbook pro

hello,
i have a macbook pro running 10.4.10 and it doesn't recognize the leopard installation dvd. the same dvd works on my G4 and was successful with the upgrade. the macbook just ejects the dvd after i insert it. i am able to play movie dvd's and/or cd's on the same macbook pro.
need help please.
thank you!

Hi coredumped,
I had the same problem today. I took my macbook pro to the Apple Store and they installed Leopard using a firewire drive. I don't really consider this a solution because my computer still ejects the Leopard disc after about 20 seconds and I can't update the Bootcamp drivers. If those things don't matter to you, you might just take it to an Apple Store (if that's an option).

Apple ID password not recognized on MacBook Pro

Similar Messages

Maybe you are looking for