APPLE IMAC 27 IN NOT COVERED BY RECALL
MY APPLE IMAC 27 INCH HAS A FAILED HARD DRIVE BUT ITS NOT SEAGATE. A HARD DRIVE SHOULD LAST LONGER THAN 1 YR AND I FIND IT STRANGE THAT MY HARD DRIVE DOESN'T QUALIFY BECAUSE CLEARLY IT IS DEFECTIVE.
WHAT ARE THE SPECIFICATIONS OF A REPLACEMENT. HARD DRIVE
Call Apple tech support and/or Customer Relations & ask them.
Typing in caps is considered shouting in cyber space. It's also very hard to read.
Similar Messages
-
Apple IMac Internet not connecting
I have a a WRT54GS and an apple imac and it recognizes the network but will not open the internet. I noticed that on the forum maybe its a firmware update or downgrade. What version of firmware should i be at?
is any other wireless client able to go online ?? if yes, check the ip add on the imac..ensure that it has an ip add in the range of the router ..
the firmware needs to be 1.52.0 if the router hardware version is 5 or 6 .... -
My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug MayI can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.
-
IMac 27" with Win7, Apple bluetooth keyboard not connected, STUCK.
I made a huge (and naive and stupid) mistake and now have an iMac stuck at the Win7 boot screen because it can not find the keyboard. I can't boot it back into OSX either because the keyboard OPT key is not recognized. Here is what happened:
My iMac 27" was working perfectly in dual boot mode and I could arbitrarily boot in either OS without problem since 3 months. Well, today, a friend called and said that her Apple keyboard is not recognized by Win7 on her iMac and she can not type. So I made sure that the battery is good and the green light is on, then I told her to go into the bluetooth device panel and remove the keyboard then re-pair it again. My thought was that I have done that with all bluetooth devices in Windows without problem, and Apple hardware and software is solid, so that got to work without a glitch, right. WRONG. She struggled to pair and connect the keyboard in Win7 to the point that I said I will remove my keyboard device and reconnect it so I can tell her the exact steps. Well, I learned the hard lesson with Apple stuffs myself. After removing the keyboard device, I could pair it, but not without difficulty. Then, however, does not connect, since I could not type and the device driver says that the device can not be started. Then I read messages in the Apple forum recommending to boot up in to OSX to remove the device there and boot it back into Win7 to pair it. OK. I used the mouse to shut down the Win7 and forgot that I have no keyboard now. I couldn't have used Boot Camp control panel to boot into OSX but I was so confident in Apple that I did not think about it. Now, I am stuck with a machine that boots into Windows without stopping and hangs at the first screen because the keyboard is missing. I inserted the OSX DVD in the hope that it would boot from the DVD but it does not. And the DVD is of course stuck in the drive. I am working at a remote location and do not have a usb keyboard or anything else.
Can anyone recommend a procedure to boot into OSX in my situation? Or can anyone tell me if I can pair and connect the keyboard in the BIOS? I googled but could not find anyone in a similar situation like mine. My friend can take her machine to Apple store for service, but I am in a country that has no Apple store.
Thank you very much for any hint.
tomI don't know but I installed my Windows 7 with Bootcamp without using a USB keyboard (cuz I don't have one). But you will at least need a USB mouse though. The moment it requires me to use keyboard input for various of information the bootcamp already downloaded required drivers and updates for my wireless keyboard to work. Make sure your wireless keyboard are on and try type something on it (it goes into some sort of sleep mode when you first start it).
Message was edited by: Aetherbomb -
I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8
Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?
Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem. -
How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
Thanks....Launch Keychain Access and click on Login in the left hand pane and then on Passwords. Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up. That will give you the ID no. and password.
OT -
the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/
Isa Garduño wrote:
the only way to creat an icloud account is with a ipad, iphone or imac Apple computer.
As you already knew, no, you cannot create a new iCloud account from anything but the above devices.
http://support.apple.com/kb/HT4436 -
Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG -
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Imac will not boot up, chimes with apple logo and beach ball spin??
imac will not boot up, chimes with apple logo and beach ball spin?? after installing adobe flash and up graded apple softeware
If your iMac came with or is running Lion, startup holding either the Command-R keys or the Option key and select the recovery partition and then use Disk Utility to repair the Macintosh HD.
see > OS X Lion: About Lion Recovery
If your running Snow Leopard or earlier OS X, pop in your Install DVD and startup holding either the Option or C key, then open and use Disk Utility to repair the Macintosh HD.
see > Mac OS X - Using Disk Utility to Repair a Disk -
After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?
Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.
-
My Imac does not start anymore.
==> What I have already done:
1) I tried with the tigger dvd to reinstall. It didn't succeed.
2) Via the single mode, when starting I got the message "disk0s2: I/0 error" several times. After that I got "Root device is mounted read-only"
3) Nevertheless, I tried the "fsck -yf" function. After checking "Journal HFS Plus volume", "extends overflow file", "catalog file"... and invalid record count
==> /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
Can someone advices me? I red on the internet I could reformat the disk... loosing all the data I didn't backed up. How am I suppose to reformat?
Thanks in advance,
FredReset the SMC: http://support.apple.com/kb/HT3964
Reset the PRAM: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
Restart the computer while holding down your mouse button which if you hold it down long enough (5 minutes at most) should eject the disk
If the disk still doesn't come out at that point then you need hardware evaluation;
contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store. -
Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around HELP !!
Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
http://support.apple.com/kb/HT1509
Have you been backiing up?
Maybe you are looking for
-
Problem install Oracle 8i (8.1.7) on Linux Mandrake 8.1
Hello, I want to install Oracle 8i Enterprise Edition (8.1.7) on a Linux Server (distribution : Mandrake 8.1). I do all the task execpt the kernel configuration : - swap 273Mo + a temprorary file swap 300Mo - glibx 2.1 installation (compatibility fro
-
I upgraded some albums to iTunes Plus - songs duplicated/overwritten
I upgraded a couple albums to iTunes Plus quality, specifically Elton John's "Live in Australia" and his debut album "Elton John". Both contain the tracks "Your Song" and "The King Must Die". When I downloaded the iTunes Plus version of the album "Li
-
Error: Reading Credit Master Data in IC
We are having trouble reading credit master date in the Collection Factsheet tab on the Navigation Bar of the IC. Does anyone have any ideas? Thanks.
-
Can I do the following in PhotoShop?
I wonder if someone can answer a question for me. I would like to be able to open an image in PS, define vectors around a section of the image, and then using the nodes and handles of the vectors, distort (or rather change the shape) of the selected
-
Why does my OS X Yosemite 10.10.1 ring when my iphone 5S gets a call
why does my OS X Yosemite 10.10.1 ring when my iphone 5S gets a call