Apple iPad 6.1.2 10B147 - Active Sync Issues Remain

Hi,
Please correct me ASAP if I am posting this in the wrong area of the discussion forum.
I have a batch of Apple iPad devices that are now connecting to our Exchange 2003 system using Apple iPad iOS 6.1.2 10B147 devices. It would seem that these devices may have the 6.1 Active Sync issue again even though this version was meant to fix the issue.
A couple of users have reported this morning reoccuring calender cancellations, we have also had excessive log growth on Exchange 2007 platform.
Here is the reported "Device Agent" from Active Sync logs:
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Here is the reported Device iOS
DeviceOS
iOS 6.1.2 10B147
Does anyone know if Apple has this as a reported bug yet on their fixed version? If not is there an official Apple bug submission process that should be followed?
Regards
Ben Paddick

Hi waddock,
I think that for the most part, iOS 6.1.2 resolved the recurring calendar bug and the significant battery drain issues. With that said, I have had a couple cases of devices still experiencing the battery drain but not the calendar bug. Quick fix is to remove the Exchange mailbox(es) from the device and re-add it. If there are any existing accounts that use Exchange ActiveSync (I think Hotmail and legacy GoogleSync), I just remove and add them back to just in case.
I suggest checking here for periodic updates on what's going on with EAS (Exchange ActiveSync) and 3rd party devices like Apple:
http://support.microsoft.com/kb/2563324
I assume you're an on-premise environment, so to mitigate short-term, you may want to think about blocking certain devices on certain operating systems using your Device Access Settings in Exchange for mobile devices.
For feedback for Apple, you can do it a couple ways. This is the internet facing site:
http://www.apple.com/feedback/
Or you can create an Apple Developer account (or Apple IT program if you have an enterprise agreement with them) and start submitting feedback during your testing (i.e. beta versions of iOS):
https://developer.apple.com/
Hopefully this helps!

Similar Messages

SAP HR Active Sync Issue

Hi,
I encountered SAP HR Active Sync issue: The IDM seems can't receive the IDOC but SAP side says the data already passed to port OK.
I enabled the verbose mode of the Active Sync logs and it is repeating:
2009-06-04T17:07:08.750+0800: IDOCs of message type HRMD_A will be processed.
2009-06-04T17:07:08.750+0800: {jco.server.gwhost=10.153.3.20, jco.server.progid=IDMRFC, jco.server.gwserv=sapgw01, jco.server.trace=1, jco.server.unicode=1}
2009-06-04T17:07:08.750+0800: Started IDocServer (IDMRFC)
2009-06-04T17:07:08.750+0800: Done initializing SAPHRActiveSync resource adapter.
2009-06-04T17:07:08.750+0800: SARunner: loop 0
2009-06-04T17:07:08.812+0800: Started, paused until Thu Jun 04 17:07:08 GMT+08:00 2009
2009-06-04T17:07:13.812+0800: Pause completed
2009-06-04T17:07:13.843+0800: Polling
2009-06-04T17:07:13.843+0800: Poll complete.
2009-06-04T17:07:13.843+0800: SARunner: loop 1
SAP side transaction WE02 shows the IDOC:
IDoc sent to SAP system or external program: Data passed to port OK
SAP HR Active Sync resource reference says:
1. Enter transaction code PFAL.
2. Insert the Object Type P for person objects.
3. Enter an Employee's ID for the Object ID or select a range of employees.
4. Click Execute.
5. Ensure that the status is set to passed to port okay.
6. The IDoc has been created. Check the Active Sync adapter log file to verify that
an update was received.
Now why I can't see the IDOC logs in the active sync adaptor log file?
Thanks!

Hi Wushilin,
Did you ever find a solution to this?
Thanks

Exchange 2007 Active Sync Issue with 1 users mailbox

Good Afternoon,
Server OS: Small Business Server 2008
Exchange: 2007 Standard - Update Rollup 13 SP3
Mobile phone: Blackberry Z10
We are in the process of decommissioning our Blackberry Enterprise Server, and down to one user. I am able to setup Exchange on his new non BES server tied phone, but it will not sync any email, all Meetings, and only some contacts. I have tried
adding this account to an Android phone with the same results. I have numerous times went into EMC and delete the Mobile device, when re-adding the account, everything seems to point to his exchange account being the culprit. I am getting the below
Active Sync error after adding his account. I have Bing / Googled around, and nothing of substance I have found. Thank you in advance!
Log Name: Application
Source: MSExchange ActiveSync
Date: 3/24/2015 2:01:15 PM
Event ID: 1008
Task Category: Requests
Level: Warning
Keywords: Classic
User: N/A
Computer: SISBS.internaldomain.local
Description:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ActiveSync" />
<EventID Qualifiers="32772">1008</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-24T19:01:15.000Z" />
<EventRecordID>4756229</EventRecordID>
<Channel>Application</Channel>
<Computer>SISBS.internaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356</Data>
<Data>--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---</Data>
</EventData>
</Event>

Hello,
Yes, it means the mailbox is corrupted. The most efficeint way is to rebuild the user's mailbox.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Active Sync Issue - Exchange 2010

Hey,
Alright I have had some issues with some iPhones connecting to our Exchange 2010 server. When i run the Testconnectivity test, I receive a timeout error on the last step:
Attempting the FolderSync command on the Exchange ActiveSync session.
The test of the FolderSync command failed.
Additional Details
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Tools.ExRca.Extensions.RcaHttpRequest.GetResponse()
Elapsed Time: 100439 ms.
When I run the Test from Powershell I receive the following message:
[System.Net.WebException]: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. Inner error [System.Security.authentication.AuthenticationException]: The remote certificate is invalid according
to the validation procedure.
I have already taken a number of steps including removing all of the Exchange Certificates that are not current. I have also reassigned them to the correct services. I have recreated the Active Sync Virtual Directory. Among other things.
I can't seem to find anything that points me to the correct direction so if anyone has any ideas on what I can look at, it would be appreciated.
At this point, I can't create the Exchange account on any new Active Sync clients (I have tested from an iPhone and Android phone) however a few people who had the account already setup get random e-mail messages that come through.

I turns out the issue was Trend. I uninstalled this software and everything started working correctly.

IPad Mail shows RSS Feeds and Sync Issues folders from Outlook2007

My iPad mail syncs with Outlook 2007, how can I prevent is from showing the RSS Feeds and Sync Issues folders as these take up a lot of space, are annoyinh and useless to me

Hi The device could be corrupted in exchange. Check out my entry below and see if it helps http://blog.theinfraguys.com/2014/04/removing-corrupt-activesync-device-from.html
Blog: Http://theinfraguys.com
Follow me at Facebook http://www.facebook.com/theinfraguys
Please remember to click “Mark as Answer” on the answer if it helps you in anyway

Exchange Active Sync issue - Xiaomi Redmi 4G Note or MIUI android 4.4.4

Dear All,
We are in technical support for exchange active sync. We are getting number of calls from Redmi 4g note device users, as they are unable to configure or change their password in particular device model(Redmi
4g note, android version 4.4.4 Kitkat).
The same password is working well and good in Outlook, Webmail and other android/IOS devices.
Steps taken as of now:
User formatted the handset, flash the device and Hard/Factory reset,
Disabled the active sync service & enable again for users from exchange server,
Removed accounts from webmail.
We download some apps from play store and tried but no luck.
While configure exchange active sync in Particular model users are getting error as "User name and password incorrect".
There is no issue from exchange server and user account. as same is working fine in other devices. This issue happening for more that 10 users and receiving more calls day by day.
I request anybody to take it forward and provide the solution/suggestion, if it is a known bug for particular device model. Please confirm back.
We are waiting for someone valuable reply. Many thanks in advance.
- Senthilkumar.

ActiveSync clients are developed by the device manufacturer and/or its operating system developer. I recommend you contact their technical support or find and post to a forum specific to that device.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange Active Sync issue - Xiaomi Redmi 4G Note or 4.4.4 Kitkat

Dear All,
We are in technical support for exchange active sync. We are getting number of calls from Redmi 4g note device users, as they are unable to configure or change their password in particular device model(Redmi
4g note, android version 4.4.4 Kitkat).
The same password is working well and good in Outlook, Webmail and other android/IOS devices.
Steps taken as of now:
User formatted the handset, flash the device and Hard/Factory reset,
Disabled the active sync service & enable again for users from exchange server,
Removed accounts from webmail.
We download some apps from play store and tried but no luck.
While configure exchange active sync in Particular model users are getting error as "User name and password incorrect".
There is no issue from exchange server and user account. as same is working fine in other devices. This issue happening for more that 10 users and receiving more calls day by day.
I request anybody to take it forward and provide the solution/suggestion, if it is a known bug for particular device model. Please confirm back.
We are waiting for someone valuable reply. Many thanks in advance.
- Senthilkumar.

Hi,
Please try run below command to double confirm the authentication of ActiveSync:
Get-ActiveSyncVirtualDirectory | FL Identity,*URL*,*Auth*
Additional, I find an blog about A script to troubleshoot issues with Exchange ActiveSync:
http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx
Since this issue related to ActiveSync, We recommend contact Mobility and ActiveSync Team so that you can get more professional suggestion.
Please refer to:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Active Sync Issue in Exchange 2003

What is the limit of concretion connection on Active sync exchange 2003 server with single front-end server and single copy mailbox cluster.

Hi,
Please refer to the following forum to get professional support:
Exchange Previous Versions-Mobility and ActiveSync
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobilitylegacy
Thank you for your understanding and support!
Best Regards,
Amy Wang

Have recently upgraded to iPhone 6 with iOS 8. Microsoft exchange works on iPad but not iPhone. Details incorrect password but pw fine. any thoughts. Think is active sync issue

i prefer the ME interface to gmail and want to use push

Annoying glitches since IOS 8 + the update have rendered my iPad Air nearly unusable.....way too frustrating & annoying with many glitches plus some functions just go way too slow or even worse - don't kick in at all.....necessitating a reboot.....(especially with sending emails.....need to power down / power up to get emails to be sent way too often)......stopped by the apple store the other day.....they did their "thing" ( a reset + whatever)......told me I was now good to go & all problems should have been solved / fixed......was in a rush, so didn't really test the fix until later in the day.....same problems remained....no fix whatsoever.....
some videos in various "formats" won't play now......keyboard disappears while doing almost every "google" search.....the list of glitches goes on & on.....apple & I part ways now unless this is resolved soon.....will stop by the store one more time over the weekend & give them 1 more chance....& will "test" it in the store this time before believing whatever they say & leaving......also, never happened before - an incoming facetime call was never received the other day......my friend sent a screenshot of her history of calls to show that she tried when I said that I had not missed any calls......

Microsoft Exchange Server Active Sync issue

When I purchased my Droid Incredible I set up my account for my work email. My job uses Microsoft exchange server so I had no issues getting setup and started.
A week later my email stopped syncing. I deleted the account and set it up again. That temporarily fixes the problem. Another week passes and I have the same problem. I reset my phone and set up the my email account again. No issues until one week later when it does it again.
Unless I can find a solution to this problem I think this phone will have to be returned. Don't get me wrong, this phone is great but email is the reason I purchased this phone. There are 52 weeks in a year. I can't see myself resting my email account every week.
Any help would be appreciated!
Thx
TainoE

I had the same problem when I first purchased the phone back in May. I had about 60,000.00 emails from the past 5 years in my main server at work that I had not deleted. My IT guy told me that I had to delete my old emails and that the INC works from the main server and I had way over the amount that I should have. I work for a very busy RE firm in NYC and we get about 150 emails a day, which ads up fast. Once I dld as he suggested the phone has not had one problem w/ outlook or syncing again. The Iphone works in the exact same way. BB's operate from their own server so are not as effected by this as much. The phone works great with outlook, and actually quicker and better than my BB. Good luck!!

BlackBerry Z10 Exchange Active Sync Issues

Hello all! I am on my 4th BlackBerry device in exactly one year. I have stopped asking for a new phone as I believe it may be software related as the issue continues no matter what. I will put my Exchange account on my phone, change nothing else, ask it to sync only 7 days of email and I get nothing but a screen full of dates listed one after the other. It may be hours before I get an email on it and then once that happens, I may or may not continue to sync email. If that doesn't work, I have to delete my email account, restart my phone, add it back, restart my phone and try again. If THAT doesn't work, I have to completely wipe my phone. It is beyond aggravating. Anyone else know about this issue? It shows that I am on the latest release too. I've tried everything....What am I missing?
Carrier: AT&T
Solved!
Go to Solution.

http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...#
Please see this link! It was AMAZINGLY helpful! I had originally thought that my phones issues were software related since I had 4 phones and they each had the same exact issue. I upgraded my software version via this guys post and it worked. My phone is lighting fast, hasn't had one issue, has lots of updated features and I'm just so excited to not have to give up my BlackBerry for another phone type. AT&T really needs to push this out to their BlackBerry customers!
Hope this helps you!!

Flatfile active sync issue

Hi Friends,
I am running 2 FF AS. Second FF AS depends upon first one has to be completed. I am not sure how should I make sure that second should not run unless first one is complete.
Please throw if you have some idea, how else can I achieve this senario.
TIA

Insufficient data, Captain.
Do you process all records in the second FF?
Do you process a diff of records in the second FF?
What are the frequencies of the FFAS schedule? first run/second run.. are they hourly, every 30 minutes, every 5 minutes, every minute?
All these would have an impact on the design.
Only way for sure is to look at Log of 1st FFAS, when the string " Poll complete.. setting schedule for..." (or what ever the exact text is) then and only then move the latest file of the second FFAS into the directory where the 2nd FFAS is looking.

Exchange 2010 Active Sync issues

I know I've posted a lot lately, but the issues keep rolling in with this upgrade. Since upgrading to Exchange 2010, I have 2 users ( that have come forward thus far) saying they are unable to add exchange mail back onto their phones.
When I go into EMC to look at it and right-click on the uses it shows the option to manage mobile device. Usually when there is no device paired, that option doesnt come up. When I go into manage mobile device, it shows that there is no device
listed. If I run Get-ActiveSyncDeviceStatistics -Mailbox:"alias" I get the same result. It shows no device. I think this is locking the user out somehow from being able to add exchange back onto their mobile device.
I have also tried removing their email box from the server, then re-attaching it. I get the same results each time. They can add exchange to their phones, but when it tries to download mail it gets "Cannot get mail. Connection to the
server failed." Even after they were able to add their account into their phone.

Since you had ActiveSync devices on these accounts on the old system, the tools know those devices existed. However, you can't manage them until you connect through the new system. Is your Exchange 2010 system the one that handles the inbound
ActiveSync connections? Downlevel systems can't support any
mailbox connections to newer systems.

LDAP Active Sync is Hanging

Howdy all,
I'm looking for some advice on debugging an active sync issue. We are running IDM 7.0, and do a lot of processing via our LDAP active sync workflows. Currently we are experiencing an increasing amount of hung active sync threads. When looking at the active sync logs, and the jakarta tomcat logs, we don't really see any errors or clues. If we examine the Show_Provisioning debug page, we can often see that a provision thread is fetching a user from some resource when it hangs. It is not hanging up on the same user, or same resource. Has anyone experienced anything like this before? Does anyone have any ideas on good ways to debug it? I was thinking about trying to trace some of the java classes that are executing, but am not sure which ones are likely candidates. Please let me know if you have any other debugging ideas.
Thanks!

Did you set the java heap size in Tomcat?

Active Sync Not Stopping

I had an issue this AM with my active sync hanging. I had the JVM restarted as active sync was not responding. The active sync is still not responding even though the jvm has been stopped and re-started.
I did notice that under the active state there is a SPE Sync:stopped.
If I try to restart it it tells me the polciy is disabled.
IS this causing my active sync issue?
How do I re-start the SPE?
Thanks!

Don’t bother about SPE Sync:stopped.,
For AS just go to All tasks and delete SARunner task related to your AS like SARunner:Active Sync and then try to start

Apple iPad 6.1.2 10B147 - Active Sync Issues Remain

Similar Messages

Maybe you are looking for