Apple Logic Express 8 midi issues with Reason 4

Hello all. Ive been trying to find information on this small but annoying issue.
I have rewired Reason 4 to LE 8 and all works fine except, when I select any of my Reason synths in LE and play my keyboard, LE triggers 2 channels at once in Reason, the selected synth and the second synth I have setup in Reason. This happens if I select any of my Reason synths in LE.
Any and all help will be well appreciated.
Kilo

Ok, I see whats happening.
If there is a track selected in Reason, its also being triggered from LE, no matter which track you choose. In other words, if I select a track in LE to play and if there is a track that does not correspond to the same one in Reason, you hear both at the same time but if the same is selected in both LE and Reason, you dont hear but the one. Confusing but interesting. Any ideas about this? I guess Ill have to just select the same for both so I dont hear the annoying two.
Later
Kilo

Similar Messages

Logic Pro 9 MIDI issues with sustaining notes

I'm a little new to Logic 9 but please bear with me. I have connected my keyboard via MIDI to USB to my Mac and the computer recognizes it perfectly but when I try to play some software instruments it many times continues to play a certain note even after I depressed it. I am not holding down my sustain pedal yet Logic still continues to play a certain note. It does not seem to be a slow fade out or anything like that but rather it seems to be stuck. It does not seem to be really any given note, since it happened to me on different notes. The only way for me to stop Logic from playing is either to switch instruments of reset the MIDI by going to the control panel at the bottom and clicking repeatedly there on MIDI in.
Could someone clue me in on what to do to remedy this issue?

sounds like either logic is not seeing the note off command from the keyboard or the keyboard is not sending it properly. try playing the note that is sticking down and up again and see if the stuck note stops. or take a look at the midi i/o window in the transport at the bottom of the arrange page when you press the note it will show the note and when you let off, it should read off.
Also you may want to limit some info coming into logic and see if that make a difference. go to, project settings>midi>input filter, and check the aftertouch and polyphonic aftertouch, and maybe system exclusive, so that it is filtered out and see if that helps

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

Is Apple aware of the Wifi issue with the IOS8 upgrade?

Is Apple aware of the WiFi issue with the IOS8 update? If so, what are the doing about it?

Ipad, wifi stops working and I have to restart my iPad and log in again. It only stays logged into my wifi for a short while then it drops it again. I followed instructions from other threads to reset my IPad and my router...still having issues. The same thing happened the last time I updated my IOS.

Oxygen25 midi issue with Logic 9.1.8

Just recently bought a Oxygen25 midi keyboard controller and I'm running it on the latest macbook pro (10.8.2), with logic pro 9.1.8 - 32 bit. Everything functions on the midi keyboard expect the 8 controller Knobs, no matter what I do I can't get the knobs to recorded functions into Logic. I've download the latest directlink mode drivers and installed them correctly, I've gone into controller assignment window using learn mode button and assigned each knob to certain functions, cutoff, speed on ES2 synth. When you play the keyboard and turn the knobs the sounds work fine (no problem) but when I hit recorded the sounds play but will not record into logic. The pitch bend shows and works in the hyper editor and the All velocities but there's nothing coming through on the rest (Volume, Pan, Modulation, Ch. Pressure, Poly Program and Program.
I'm I missing something really simple here or does this keyboard just not work with logic ? I've been on M-audio website and there's no solutions, I've also looked on discussion board but had no luck. Any advice or help would be welcome, please help me get back into making some music.
Found this article on M-audio but not sure what it relates to - (These knobs map to control the track volume for the currently active bank of eight tracks)
Thank-you
Andrew

I'm having the exact same issue with the Multipressor in Logic (but not in Waveburner). What gives?

Logic express 7.2.1 with Tascam US-122 issue

Im running Mac OS X 10.4.7 on a Powerbook 1.67 Ghz PowerPC G4 with 512 in RAM. My software is Logic Express 7.2.1.
I've installed the latest drivers to my USB external audio device Tascam US-122: 3.4.0 found on Tascam's website.
Here is the problem: I need to use sample rates (I/O buffer size) 512 or 1024 otherwise it starts to "crackle" and telling "system overload". With my new latop it should run on 64 or even 32.
- Any help what the problem is?
I have tried both re-installing logic express and us-122 drivers.

Hi Niili,
I have the same problem with a digi drivers too,
I didn't have a clue on how to to deal with iet,
you wanna laght?
When I use Protools Le, I can have lower buffers without problem,
not with logic!
It problably have to do with the drivers.
I'll get back to you, if I have better news.
I'll hope the you do the same if you discover a turn around it.
Or any mates out here!
:o)
Kindly regards,
Jorge

Feeling Ripped Off - Logic Express 9 Upgrade Issue

Hi, I have been using Logic Express 8 for about a year. I just bought the upgrade for Logic Express 9. I started installing it, entered the serial number and then I was prompted to enter the serial number for my Logic Express 8.
I have since misplaced my LE 8 booklet with the serial number on the back (a bunch of stuff didn't make it to my new apartment in a move). I didn't think this would be a big deal. I thought I would be able to find the serial number of my current version of LE 8 by clicking on the "About Logic Express" tab when I have the program running. However, when you click this all you get is who it is registered to (me) and the version number (8.02).
I called technical support and asked them where I can find the serial number and they said sure, "click on About Logic Express when you have the program open and it will be right there (he also called it the splash page)." It wasn't and isn't. The tech support person said "ah yes, only the previous versions of Logic Express show you the serial number of the version you currently are running." I asked if there was anywhere else that I could find this number and he said "no."
Solutions? He suggested I find my receipt and fax it in and get a new serial number. Impossible, I don't have the receipt. Call the store and see if they can dig it up. Let's get real. It was purchased with Xmas money in cash I got from my parents.
Basically, I'm screwed. I have an opened LE 9 upgrade that I can't return. I have a version of LE 8 that I legally purchased and for some dumb reason there isn't a file or page or something in the program that notes my serial number.
Not fair. I guess I have to tattoo all serial numbers for stuff I purchase from Apple to my arms on the chance that I lose a booklet. Why Apple doesn't include a file or store the serial number of the LE version you are running somewhere on the system is beyond me.
So, I feel ripped off. Apple doesn't care. I thought there would be some way we could work this out (like printing the screenshot of the page that says I am the registered owner) but they would rather try to get another $100 out of a loyal Apple customer and force me to buy LE 9 straight up. I've probably spent about $7,000 on Apple stuff in the past 6 years. I am the definition of a loyal customer.
Not fair.

You didn't buy Logic Express, you merely paid for the right to use it. When you install it, you are presented with the license agreement to which you must agree.
At the top of the agreement it reads "IF YOU DO NOT AGREE TO THE TERMS OF THE LICENSE, YOU MAY RETURN THE APPLE SOFTWARE TO THE PLACE WHERE YOU OBTAINED IT FOR A REFUND...."
So, try taking it back to the store and telling them you declined the license agreement and want a refund.
You can find a copy of the Logic Express license agreement here: http://images.apple.com/legal/sla/docs/logicexpress.pdf

Is Apple going to address the issue with the IPhone 5 charger port?

Hi all
I have had an IPhone for about 4 years and have had my current iPhone 5 for just over a year,I never had any problems until recently. Just before Christmas I started having issues with my IPhone not charging, I bought a new charger and the problem continued so I went into the Apple store in Newcastle, they pulled some dust out of the charger port and the issue appeared to be resolved. However after Christmas it happened again, and again I went to the Apple store, they did the same thing and the phone worked fine for a month. However, this last week the problem has come back, this time when I took the phone into the store, they tried pulling dust out the port but the phone would still not charge, I was then told that as the phone is out of warranty there is nothing they can do other than charge me £209 to fix it!!
What concerns me is that after speaking to other iPhone users and doing some online research I have discovered this is a seriously common problem. So now through no fault of my own, I am left with a phone, which doesn't work and costs me £48 a month. Another concern is that I originally took the phone to the store with this problem before my warranty ran out and was given a 'temporary fix', which made the phone last untill just after my warranty has ran out!
I am angry and disappointed, this issue needs to be addressed as the Phones appear to be like a ticking time bomb waiting to break, and for those of you like me, who this happens to you after the warranty is up, you are elft with no solution other than to pay £209!!!!

Or talk to the store manager or Apple Customer Relations and explain that you brought the phone in twice before the warranthy expired for the same problem and that there was no permanent solution, though if clearing out the debris fixed it previously, it's perhaps unlikely that they'll think it a defect. You can try, though. Just complaining here will accomplish nothing since we're all fellow users in these forums.
Regards.

Logic Express Create MIDI from Audio Voice Track

Is it possible to take a sung voice recording and generate a MIDI track in Logic Express? I don't need to replicate the voice in the MIDI track, but would like the pitches and rhythms for editing in Finale.
Pete P.

That is a brilliant request, I'd love to see an answer to this myself. I've thought of this type of feature in the past and seen that there are tools out there that can convert audio from a guitar or other instrument to create midi - so the technology is there - the question is can Logic do it? hmmm curious too.

Can logic express 7 record samples with the internal mic

hey im thinking about buying Logic express 7, however im am wondering if it can record samples using the internal mic, or straight off the soundcard. for example say if i liked a sound i heard on youtube and i wanted to sample that sound so i could use it in a composition, how would i be able to do this? i have been doing this with my PC using a program called Audacity but im wondering if Mac has that option or more specifically if any Logic program has that option.
would anyone be able to help me?

thanks mate, does that come with logic? or is it a separate program, if so where do i get it and how much is it?

When is Apple going to fix WiFi issues with OS3.0

Since upgrading to OS3.0 on both my original iPhone and my new 3G S I constant have issues with maintaing strong signal strength with WiFi. In areas of my home where I always had full service I'm lucky to get any at all. I can also be standing right next to my airport device and only get one bar.
Apple, when are you going to acknowledge this problem and fix it???

Hi
Here:
http://discussions.apple.com/thread.jspa?threadID=2044754&start=1080&tstart=0
is the ongoing discussion about this problem with more than 175000 views and 1000 entries, which has been moved around in the forum.
This thread-starters problem is real for many, really many iPhone users - and Apple replaces their phones, although nobody have any official comments from Apple.
My unprofessional guess is that it seem like 3.0 provoked a hardware failure, like overheating or something on the wifi chip, and there seem that there is no going back - your wifi is dead. No upgrade, (and if you did 3.1 there is no down-grade possible) will fix it. Leaving your phone off-off for a while and then restart it, may bring your wifi alive for less than a minute, but after that it fail to detect anything.
There is a feedback center which you can try to contact Apple with the problem, if not, contact your sales-point and get your phone replaced if you are still under warranty.
Good luck
Ken.

Airport Express (n) signal issues with Powerbook G4

Here is my setup:
1 Airport Express (n)
1 Cradlepoint CTR500 router
1 Lenovo PC Laptop
1 Powerbook G4 12"
I have a printer hooked up to the Airport Express as well as my stereo. I have the AX set to 802.11n (b/g compatible) for the Powerbook. My laptop (PC) is n. The Powerbook is approx 10 feet away from the AX, and there is a wall with a door between the two. No electronics are between in the wall, etc. Its a pretty strait shot, except for the wall.
I have noticed that the Powerbook will show 5 bars for Airport, and after a little bit, go down to 2 bars, or even 1. It will stay there, couple of mins at the most, then shoot back up. Sometimes I have to disconnect (turn airport off) and then reconnect to establish 5 bars.
Now, I have also noticed on my PC that (being 3 feet away from the AX) I will sometimes go from 5 bars to 4, and my laptop will register anywhere from 14 Mbps up to ~150 Mbps connection. It settles around 72 Mbps when the Powerbook is connected to the network. So why under normal web page browsing, does my speed drop to 14, 28, 36 Mbps, yet show signal strength at 4 bars, or even 5, usually when the Powerbook is connected? In addition, and I understand that the 54G rated Powerbook will slow the network down all around, why is it that the Powerbook will drop from 5 bars down to 2, or even 1 in the airport menu? Is the AX changing channels? I have manually set it to channel 8 to see if that was the problem, and it didn't seem to solve anything.
I am kind of at a loss here. Perhaps interference? I do live in an old 100+ year old house, so that might be an issue? I will say that when I set it to N 5GHz, my laptop will connect and maintain a 300 Mbps speed. That's pretty good IMHO. So since that stays connected properly, I can only assume that it is a 2.4 GHz interference issue with neighbors, upstairs phones (this is an apartment) or other devices perhaps.

I think you're probably right that you're getting intermittent interference at 2.4 GHz.
Suggest you try [iStumbler|http://istumbler.net]. Monitor it for a day or so to get an idea of which channels your neighbors may be using. Then, set the AX to one as different from the others as possible. If the interference problem returns, try another open channel.
Also, try activating interference robustness on the AX and Powerbook.

Apple airport express will not work with my iPad ?

Apple network. Cannot be set up by this soft ware ( this is the message I get when trying to set uo apple airport express

I'd take a free Express.
Use AirPort Utility - it's free too.

Apple TV started having streaming issues with Netflix

Several days ago my Apple TV is no longer providing consistent streaming throught Netflix. Before that, I had great streaming through all content for many months.
Issues, configuration and some actions already taken:
Video quality starts suffering, then some pauses/buffering begins.
I have tried the same Netflix account, content and network to trace the issue and found out through my Macbook Air and iPad and the streaming is excellent.
My Apple TV is connected to my ISP through an Ethernet cable at 200 Mbps (tested @ Speedtest.net)
I already restarted several times, and restored once my Apple TV.
Software is updated since it became available.
Yesterday, I found a post which recommended to manually setup my DNS to 008.008.008.008 which I did and worked great at that time, but todays problems are back with that fixed DNS and with Auto setup.
I hove someone here can help me with some further advice, or perhaps Apple very soon releases a fix. Seems that the latest update improved Airplay consistency to deliver both video and audio and not only video, but might have broken Netflix streaming.
Thanks in advance.

Yes, I'm having the exact same issue since the latest update. I thought it was my internet connection but it worked perfectly fine in my ipad and macbook air.
I also have 2 Apple TV's and the problem is in both of them. I really hope apple fixes this issue ASAP.
In the meantime, if you wanna watch your netflix content on your apple tv with good streaming and you have an iPad/iPhone with netflix on it. I recommend Airplay mirroring the iOS device and then opening netflix, it will airplay the video content and the iphone/ipad screen will function as a remote control with all the settings and stuff...its kinda cool...the only bad thing is that you can't turn off the iPad/iPhone screen or it will pause the movie.
i hope this works for you while apple fixes this issue.

Logic Express no MIDI instrument output

I use Express with an M-Audio Fast Track Ultra. Always had no problems, but now when I load a software instrument, I get MIDI input trigger messages but no monitoring output. In other words, if I record then playback, I hear what i recorded, but I cannot hear it as I play it. How can I restore the monitoring volume to my Express software instruments?

I had the same problem. I'm not in front of my studio computer right now, so I'm not sure if this is correct, but you need to hold down or right click your mouse over the icon in the track name window and select the instrument and channel that you want to play thru. Typing in the channel and changing the port in the channel strip is not enough. At least, I think that's what I had to do. Also, make sure you're set-up correctly in the Environment.
Good luck.
Paul

Apple Logic Express 8 midi issues with Reason 4

Similar Messages

Maybe you are looking for