Apple logo appears but won't proceed to main menu screen
My video ipod recently went unresponsive. I have completed the 5R's numerous times. I am still able to put my ipod in disk mode and it is appears in itunes when I do so. However when it appears in itunes a message pops up saying that the ipod is in recovery mode and needs to be restored to original settings. I have restored the ipod to its original settings several times. However when it is finished restoring, I have to change the ipod from disk mode by pressing the select and menu button at the same time. When I do this after a restore the apple logo will appear and then a small bar at the bottom of the ipod screen will show up as if it were downloading something. Once the "download" on the ipod is complete my ipod will restart the apple logo will show and then nothing. I have tried formatting my ipod through windows. Only the quick formatting works. PLEASE HELP!!!!! What am I doing wrong? Would it have anything to do with my firewall settings or a virus on my computer? Or is the hard drive shot on my ipod?
Hi there Appleyard722,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
-Griff W.
Similar Messages
-
I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Help!! I'm in Belize (not a good place to be with an Apple, as international as you may claim to be!) and my computer decided to "quit" thusly:
White screen with a crossed out circle which flickers to the Apple logo sometimes, but won't open. What can I do to open it? (I do have my recently backed up data with me, but no loading discs for my computer.
Hoping there is a solution,
DianaThe make of the disk doesn't really tell us how your data is being backed up onto that disk. Do you know what software it uses?
For example Time Machine copies files every hour in a way that is not bootable, but you can extract those files & get all your data back into a working OS.
Carbon Copy Cloner duplicates a disk in a way that is bootable - it would appear when holding alt at startup so you could use that to boot & inspect the state of the internal disk.
It may also be Seagate's own software that does something different.
Please try recovery mode, if that works you can try repairing the disk in Disk Utility.
OS X: About OS X Recovery - Apple Support
If that works, select Disk Utility & see if the internal disk can be repaired in the first aid tab.
Recovery mode can also download OS X & reinstall it, however you really need to know if the backup contains everything before that is attempted, otherwise you may lose data. The OS is also around 5GB so you may have issues if your internet is capped or unstable etc.
P.S.
I have no idea if this is helpful, but there may be help out there…?
http://belizeyp.com/Belize/I-T-Engineers-Consultants/profile
https://www.google.com/maps/place/VIP+wireless/@17.4938135,-88.1914518,4205m/dat a=!3m1!1e3!4m2!3m1!1s0x8f5c583ff12cb605:0x17a5a2f97fc838c3?hl=en
Search & ask around, you may find some help, try recovery mode first. -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update. Now my iPod doesn't turn on completely. The apple logo appears but then the screen goes blank. I've tried charging it, letting it discharge, I've tried things I found on the internet but nothing seems to be working. What can I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Original text by lllaass
-Ethan -
when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!
Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore -
My IPad shut down this afternoon and now it won't start up. It's less than 1 year old. I tried plugging it in and pressing the on/off button. After holding the button in for several seconds, the Apple icon appears, but then disappears.
First, try this:
Plug it in to the wall using an Apple charger and Apple cable for several hours. The idea is to fully charge it.
Then hold the home and on/off buttons together for about 10 seconds. Hopefully the Apple logo will appear and it will start. Do not release the buttons until you see the Apple logo.
If it starts, great. If not, you say your iPad is less than a year old. If you bought it brand new from an Apple Store or Authorized Apple vendor, it is under warranty. Take it to an Apple Store or Authorized Apple Service Center for diagnosis and repair. -
I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
After a phone reset,apple logo appears but phone wont start
After a phone reset,Apple logo appears on screen,but phone wont start!!
That hapened to me and this fixed it. I dont know what it does or how it works so dont hold me accountable but it worked for me
Entering DFU Mode (Official Instructions)
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
Make sure the device screen is blank and no logos are present
Exiting DFU Mode
Hold Home and Power Button till the Apple Logo appears
~Jordan -
how to fix ipod touch if it hungs/ does not turn on and stays only on the apple logo when you press/hold the keys home and sleep/wake. and when connected to the computer, it does not appear in the itunes that the ipod is connected or simply the computer does not recognize the device. i barely need you help guys! please...
I found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-) -
Please Help!! I've tried to unlock my IPAD..using instructions given to do so..Apple Logo shows up..but nothing else happens.Still disabled.?
If the iPad is disabled, then you will have to restore the iPad in recovery mode on iTunes.
-
My iPhone 4 won't work, the apple symbol appears but never goes through to the lock screen
the apple symbol comes up but doesn't go to my lock screen.
I'be tried the home and lol screen button and left it on charger but it didnt help.Hi there Appleyard722,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
-Griff W. -
I have no idea what to do will someone help me please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I had just checked my phone and it had 41% battery life left. A few minutes later, it simply went blank and won't do anything. I tried reseting it by pushing down on the wake/sleep button and the button on top until the Apple logo appeared, but that didn't help. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.
Maybe you are looking for
-
How to make SELECT querry to work for CONVERSION EXIT
Dear All, I want to select some data from from table J_1IEXCTAX , and to limit that retrieval I have WHERE clause for fields VALIDFROM and VALIDTO My select querry is like SELECT SINGLE RATE ECSRATE FROM J_1IEXCTAX
-
IPhoto populated my events with thousands of graphics.
Just downloaded the new iPhoto and it populated my events with thousands of graphics. Now the program crashes!!!
-
Morning all, I'm dipping my toe into the world of ASscripts, trying to do things the better way-at least i'm told, but am having great difficulty. Any pearls of wisdom you can share would be very gratefully recieved! What i'm trying to do is assign a
-
Cursor skips in Mail 8.0 on word with apostrophe
When typing any word with an apostrophe in the middle (e.g. we'll, we're, she'll, it'll) in Mail 8.0, when I hit the spacebar after typing the word, the cursor skips back/left two spaces to between the first and second "l" in the word just typed. Any
-
Sorry for being naive. Once the datafiles, controlfile, and spfile are restored, archived redo logs are applied to restore. This is a roll-forward operation. There is an undo segment in the db, why whatever stored on undo tablespace is not used durin