Apple logo blinking every 3 seconds - nothing to do with iphone

Hi all!
I was using my iPhone, with its battery more than 70%, but suddently it tuned off by itself. I tried restarting though on/off button and home button, but it didn't start. I tried recharging and it didn't work as well. When I tried to connect to iTunes, the phone was not detected as usual. Then, the screen only showed the apple logo blinking every 3 seconds. I also tried updating my itunes, yet it still had no effect. Any other advice how to solve this problem? Thanks.

Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
If that doesn't work, make an appointment at any Apple store.

Similar Messages

  • Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success.  have tried this many times and kept connected for several hours.

    I have a classic, several years old.
    It will not recharge; the Apple logo flashes every few seconds then disappears. 
    I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success. 
    I have tried this many times and kept the ipod connected for several hours.  And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

    Hi enbridge4,
    If your iPod Classic won't charge or turn on, you may find the following articles helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/ts1383
    Apple Support: iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    Regards,
    - Brenden

  • My Ipod classic 160 gb,is dead only blinks when plugged to cpu via usb cable reset apple logo blinks as well Help!!!

    My Ipod classic 160gb is dead,It only responds when I plug it in to cpu via usb cable then the screen blinks.When I try to reset it the Apple logo appears but the apple logo  blinks on and off to as long as i hold the buttons down,when i realease the reset buttons it just blinks back and fourth to the blank gray screen,it worked fine yesterday night this morning its tanked.is this unit completely dead or can something be done at home?
    Thank you for your help
    Ice

    I wrote this long time ago, have a read and see whether it can be soloved
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Satellite A300-1IW: HDD access light blinks every seconds

    Hello everyone, and sorry for the english, I'm french :)
    I bought a Satellite A300-1IW few days ago and suddently (didn't remember exactly when) the HDD access light start to blink every seconds and it continues even after several reboots!
    It only does this with Vista; I checked the disk activity with "diskmon" and I saw that even if there were *no* *disk* *writing* *or* *reading* the led continued blinking, so I think it's not related to some vista services (superfetch, indexing...)
    I saw on a Microsoft support a similar problem but it was under windows 98 and with old motherborads!
    see : Link: [http://support.microsoft.com/kb/138598]
    It seems so that it's related to Vista SCSI or DVD quering...
    I now that's not critical but it's annoying to have this led blinking all the time
    Have any idea? Do you think it could be related to the bios? I want to be sure before touching this because it's always delicate.
    Thanks for your help

    In my opinion nobody must offer any comment because you already given the answer. This is nothing unusual and definitely no reason for panic.
    What to do about it? What you want to do? Sorry but it is really stupid question. I can just offer you one stupid answer. ;) Take some black adhesive tape and cower the LED. ;)

  • HT4623 i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.

  • Pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    See here  >  http://support.apple.com/kb/TS2570

  • HT4623 help! I didn't use my ipad for about a month then now it would not turn on, just a balck screen with apple logo blinking in the middle, please help

    Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • I have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens.  It will work in my docking station  but as soon as i take it out it will not respond.  any ideas, do i need a new battery?

    i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens.  It will work in my docking station  but as soon as i take it out it will not respond.  any ideas, do i need a new battery?

    It definitely sounds like your Nano needs a new battery at this point.  You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
    B-rock

  • Iphone4  apple logo blinking

    i have iphone4 at&t phone not unloacked, updated 5.0 1 and jbed after 3 days back wifi and bluetooth adress hiden and phone off the turn on time only apple logo blinking tred restore fw and also used cfw with sn0wbreez
    error 21,1601,1602,1604,2005, 20,16,etc
    restore time prepairing phone for restore and stuck , dfu mode using time phone disconnect apple logo blinking used redsnow matrix display coming time phone suddenly off and auto on logo blinking
    try another system same iam reassembled phone problom still
    iam edit host file same problom
    sory my bad english
    any body idea?????????????????????????????????????????????? ????

    The jailbreak made your phone unusable, and problems with those devices can't be discussed here, due to the Terms of Use.
    Sorry, the only help you could get, is from those people who convinced you to modify the software.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • Ipad cant be used - keeps flashing 'enter apple id password' every second

    Hi,
    I turned on my iPad 3 today and it is unusable.
    Every second it flashes up with the following - Sign in to iCloud.
    It wants me to enter an old apple ID that has been disabled.
    I cant sign in to make the flashing stop, and I can't do anything else as the flashing is continual every second.
    I have tried turning the iPad off, resetting by holding home and off button.
    I thought I would reset to factory settings and just lose my data but that isn't working either!
    Any suggestions would be appreciated.
    Thanks!

    Hi SmithyfromBT,
    To be sure an old Apple ID does not keep popping up like that, use the steps in this previous thread to remove it -
    How do I change my Apple ID on my iPad? | Apple Support Communities
    https://discussions.apple.com/thread/4431720
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
    iPhone - Contact Support - Apple Support

  • I am trying to download snow leopard, but with around 46 mins to go, a message appears saying, my coup is going to restart,it does but with just the apple logo,and white screen, nothing else,can anybody help? jib.

    i am trying to download snow leopard, but with around 46 mins to go, a message appears saying, my coup is going to restart,it does but with just the apple logo,and white screen, nothing else,can anybody help? jib.

    I think we need more clarification.
    What do you mean by "download"? Only updates are available as downloads, the System software has to be installed from a DVD.

  • HT201401 my iPhone 4s  fails to turn on. When I press the sleep button the apple logo shows displays but nothing happens after that

    iphone fails to turn on. The apple logo shows up but nothing happens after that

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • When i clicked on erase all content and setting in my iphone3, it first shut down and next the apple logo appears and then nothing happens, how to fix it

    when i clicked on erase all content and setting in my iphone3, it first shut down and next the apple logo appears and then nothing happens, its been 12hrs since like that. i tried force restart by clicking the home and sleep/wake button, and still same issue.

    I believe with the 3G and the older iOS, erase all content and settings acts differently than the newer iOS. You can use this support document http://support.apple.com/kb/HT1808 to place the phone in recovery mode and restore it.

  • TS4002 After the icloud update I have not been able to access any of the newly formatted icons including mail, is anyone else experiencing this.  I report to apple through the tab but nothing changes. My iPhone mail is unaffected.

    After the icloud update I have not been able to access any of the newly formatted icons including mail, is anyone else experiencing this.  I report to apple through the tab but nothing changes. My iPhone mail is unaffected.

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

Maybe you are looking for

  • How to restore a 5s backup to a new iPhone 6

    I lost my 5s at the bottom of a lake. I've been limping along with a dumb phone for the few weeks before the new iPhone 6 ships. I have a backup from right before I lost the 5s. I'm planning to buy an iPhone 6 right away. My question: Since my backup

  • Photoshop CS3 Extended Keyboard Shortcut Not Working

    I installed the CS3 Master Collection that included Photoshop CS3 Extended. I've used Photoshop for going on a decade and I find the CTRL+ALT+I keyboard shortcut really handly to pop open the Image Size window. Now, in this new version (don't after a

  • Mass print of detailed invoices (AR, AP)

    Hello, I would like to ask you to help me with the issue of the mass printing of detailed invoices of Accounts Receivable and Payable. I tried in FB03 but there is the only possibility to print list of invoices. I need something where I can choose to

  • I cant sync my iphone calendar to my mac

    i can't sync my iphone calendar to my mac.  

  • 10.4 .8 & Pro Tools 7 LE

    I can see from other posters on here there are a lot of issues with the update 10.4.8 I am afraid i am also having issues with my Pro Tools 7 LE I'm not sure if it started when i installed the 10.4.8 update but now whenever i go to open Pro Tools it