Apple logo flashing off and on

I have basically dropped my iphone so many times that it is now not working
I bought it in the UK but I am now living in the US - It is our of warrenty
It has no glass on the back and little on the front - the home button is also off
I am happy to repair all of this myself however my phone wont start
It does power but only has tthe flashing apple logo (as it wont start I also cant sync it)
any help would be good
I would take it to an apple store but not sure how it works with being a UK phone
thanks

While the Apple warranty for the iPhone is not international, you mention the phone is out of warranty. There is always the chance they will take it and allow you to make an Out of Warranty replacement. That is $149US for all but the 4S which is $199. They will do the OOW swap for the same model, color and size of iPhone that you bring in. It is worth a shot!

Similar Messages

  • When i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. how can i stop it and turn on my ipod??????

    when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Apple TV flashed off and on

    Yesterday, when I set up my new out of the box Apple TV, it seemed to work fine.  Seemless set up, I was able to stream my itunes from my conputer.  Now tonight, the unit flashes off and on when I started it up.  What should I do?

    I have 2 Apple TV's one works fine on 4.1.1 software. The other I updated and now any of my video files that have 6 channels of audio, play no sound. And All the movie categories are appearing all wrong. In comparison the other apple tv still plays the audio fine and the categories appear normal.
    Is anyone having this issue, if your not streaming video files from you peronal library with multi channel audio, you might not know you have a problem. My simple 2 channel audio files play fine.

  • How do i fix my issue: Apple Logo flashes on and off after iphone battery died during IOS update?

    I've tried the methods I've seen on youtube and other iphone tech help sites but I am still having the same problem. Today while updating to IOS 7 my iphone 4 battery died and I didnt have a charger, now that I am home an I put in on the charger I notice the apple logo just flashes on and off. I've tried to restores using the DFU mode with the home and power button but that only seem to stop the logo from flashing and even then the iphone still isnt recognised by the pc to restore, Is there any other way i can go about fixing this problem!!!!

    You can try the steps recommended in the User Guide.  If they don't work bring your phone into Apple for evaluation.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • HT201263 ipod touch cannot turn off or on apple logo flashes on and off

    i have the first ipod touch and it is flashing the apple logo. it will not power off or on. it is stuck in this mode. I have tried pressing both buttons for 10 seconds. It will not respond when plugged into itunes either.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod will not start or reset, plugging in makes apple logo flash on and off

    My friend's iPod nano 3G won't turn on. In fact it won't do anything - I can't even reset it. When plugged it, it flashes the apple logo every 1.7 - 1.8 seconds. Suggestions?

    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • Ipod turns on, Shows Apple logo, Shuts off

    My friend took my ipod out with her to jog, came back and all it does now is turn on, show the apple logo, turn off and repeat till the battery is dead. Anyone got any ideas? I have tried reseting it but it just shuts off untill i take my fingers of the buttons and then it goes back to turning off and on.

    See if you can force it into disk mode...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    If that works, then see if you can hook it up to your computer and have it show up in iTunes.
    Patrick

  • Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success.  have tried this many times and kept connected for several hours.

    I have a classic, several years old.
    It will not recharge; the Apple logo flashes every few seconds then disappears. 
    I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success. 
    I have tried this many times and kept the ipod connected for several hours.  And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

    Hi enbridge4,
    If your iPod Classic won't charge or turn on, you may find the following articles helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/ts1383
    Apple Support: iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    Regards,
    - Brenden

  • Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

    Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

    I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

  • My Iphone 4S keeps flashing between the Apple logo, blank screen and sign in.  It will not let me sign in, nor can I power it off.  Help!

    My Iphone 4S keeps flashing between the Apple logo, blank screen and sign on screen.  It will not let me sign on or power off.  It started about 20 mins ago.  One of my friends started having the same issue at the same time.  How can I fix this?

    Hi Bucky16,
    If you haven't already done so, you may want to reset the iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Apple symbol flashing on and off

    Phone won't turn on and apple symbol flashing on and off

    Standard troubleshooting...
    1. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it. (Try DFU Mode)
    6. If still a problem, it's likely a hardware issue.

  • Ipod classic try to start but the apple just flashes on and off.

    Ipod classic I try to start but the apple just flashes on and off.
    I can't reset and it doesn't show it charging. Not recognized by computer. 
    It was working just fine in my car, I stopped for an hour, and when I came back it just started the flashing thing.
    Anyone have any ideas?

    Reset it this way.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If it is  still not working.
    Then Restore it using iTunes
    Good Luck!

  • When i switch my iphone on the apple logo flashes on then off

    when i switch my iphone3 on the apple logo flashes on then off.

    Try leaving it on a charger? Might be low battery life.
    Try a hard reset holding the Home button and sleep/wake button ( The circle button, and button on top)

  • My iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    Hello warhogs17,
    After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT4623 iPhone apple logo goes on and off and is unresponsive

    iPhone apple logo goes on and off and is unresponsive

    It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
    i
    (And stop taking it into the sauna... or swimming)

Maybe you are looking for

  • Running multiple java-apps in single JVM?

    We have about 125 Citrix clients running on 5 Citrix Servers. We are investigating a new very big development project which will cover about 10 main projects with 15 Applications each. The complete project will be written in Java. Basically, each mod

  • Adobe Photoshop CC 'Window-Application Frame' setting

    So I've never been an adopter of the whole adobe application frame; I like the openness and abiltiy to click my desktop behind the image I'm working on. I know how to turn it off, but how do I KEEP it off? Every time I close and reopen photoshop it's

  • How to identify which data has been inserted  to the table in specific date

    Hi, i created one table without data column.. i am inserting data in that table. i want which data has been inserted today.. Please help. Thanks,

  • Silverlight crashing in all browsers

    I've been having a long tussle with Silverlight. After upgrading to Silverlight 5 the plugin crashes in any browser as soon as a silverlight site is loaded. I've uninstalled silverlight, reinstalled older versions, reset browsers and and just about e

  • Acquiring DC Voltage Signal from HP3457

    I have a question that I believe to be easy to solve. I am using LabVIEW to acquire DC Voltage from a HP3457A DMM. I can acquire the signal OK, but when I write the data to an lvm file only about every 8th measurement is correct (with the others bein