Apple Logo freeze after full Restore
I have just replaced a screen on my daughters i-phone 3G.
When I booted it back up I just got the apple logo - and no further.
I have updated to the latest version of itunes, then into Restore mode - and tried to do a full restore.
After another agonising long time with the download - the i phone still will not boot up past the apple logo.
I am at my wits end now - surely it is only the software that is preventing it working properly now so why wont it restore??
i am having problams with this as well i did a full restore on my iphone 3g aND NOW IT WONT WORK ITS STUCK ON THE APPLE SIGN AND THIS IS MY 3 IPHONE 3G BECAUSE THEY ALL KEEP BREAKING SOME ONE WHO KNOW WHAT TO DO CAN YOU PLEASE REPLY
Similar Messages
-
My iPhone 3gs is stuck on apple logo even after a restore on DFU mode, what can I do?
Hi guys, I just got an iPhone 3gs from my girlfriend and it was working perfectly, I restore it from the phone by erasing all data on it, and it wont boot after that, it is stuck on the apple logo, I've tried restoring it in recovery mode and even in DFU mode, but it's not working, what should I do?
If you live near an apple store make an appointment. They will perform a DFU restore using known good equipment.
If that doesn't work you probably have liquid damage. -
Hi Everyone,
Thank you in advance for your help.
I have an iPad 2, which was purchased online in May 2012. My iPad will not charge - the upper right-hand corner shows a charging symbol, but the iPad does not gain power. I have tried the following:
Charging the iPad with the APPLE USB cable and APPLE wall plug provided with the iPad in several different wall outlets
Charging with another, alternate apple cable (in case the apple cable I was using wasn't working)
Charging with an non-apple cable and plug into a wall socket
Charging the iPad with an apple cable into my Mac
Charging the iPad into a non-apple laptop
Performing a soft reset, by pushing the home button and power key down until the iPad reset (tried this several times, before and after full restore)
Performing a full restore, which involved updating my iPad to version 6.0, wiping the iPad clean, and then restoring it from a back-up (tried this several times)
Charging the iPad while completely powered off
Letting the iPad completely die, and then charging it - it took me several weeks to get any power back and for the red charging symbol to go away - I did this by leaving it plug into my non-mac laptop for several days, after which it finally charged it back to 14%, showing the "Not Charging symbol" the whole time.
Removing my case off the iPad (in case the case was blocking the proper insertion of the USB cable)
Blowing on the iPad port to remove blockage from dust, etc.
At this point, I'm not sure what else I can try. I combed the support threads thoroughly to ensure I didn't miss any other options, but I am hoping someone else may have thought of something I didn't try. I know that the fastest way to charge the iPad is to use the 10w USB cable provided by apple, into an outlet. I have tried this several times - it doesn't work. The charging symbol shows up in the right hand upper corner, but the display does not show a charging battery, and the iPad does not increase in charge.
I do not live in a city with an Apple Store, so I am hoping you all can provide me with a solution, as it will be a 10+ hour round trip to get this resolved in person, in store.
Your patience and assistance is appreciated.When you say " tried to reset it ", does that mean you tried holding down Home and Sleep till the screen went black and a white Apple logo appeared? That usually resets my batteries and lets them reach 100% charge.
If all fails and the device has a few years on it, the battery may very well be dead. Happens to all rechargeables. A trip to the Store for assessment will be inevitable to check the charger, cable and device. And if needed, a battery replacement alternative will be offered. -
1st Gen. Ipad slider stuck after full restore
1st Gen. Ipad Ipad unlock slider stuck after full restore. Please help. thank you.
Try a reset:
Hold the Sleep and Home button down (approximately 10 seconds) until you see the Apple logo.
Note: Data will not be affected. -
my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?
Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414
-
Help!!! Ipod Nano Frozen on Apple Logo Screen after trying to reset
my ipod nano is frozen on the apple logo screen after i tried reset it....and i think that battery was low when i tried reseting it...anyways please help...i hope if i leave it overnight the apple logo still wont be there
when you did the reset, did you follow these procedures?
Resetting
if the reset didnt work, then do a restore: Restore your iPod -
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
-
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Bootcamp 'Glowing' windows logo freeze after gfx driver install
Bootcamp 'Glowing' windows logo freeze after gfx driver install
Last week suddenly, after having changed or installed nothing, trying to boot into windows resulted in a frozen glowy window logo 'Starting Windows', which resulted in having to format the windows partition.
Since then I've found out that I can do everything except install gfx drivers.
I've installed firefox, all bootcamp drivers except gfx, swtor (doesn't run of course, but installs fine), quicktime, rebooting is fine after all this...
But as soon as I install any kind of graphics driver and reboot, it freezes at the glowy window logo.
I have tried;
The bootcamp included gfx driver
Windows Update included gfx driver
Official nVidia latest beta driver
Official nVidia latest whql driver
Official nVidia oldest whql driver
nVidia Cuda driver, both versions
All give the same result
I have formatted the entire harddrive and written zeros and made the windows partition in a physically different location to make sure it's not a harddrive issue, no luck.
I have tried both Windows 7 x86 and x64 with matching drivers, same results.
Tried booting with no devices attached, no luck.
This all seems to me like a bust gfx card, were it not that under Lion everything works fine, even gaming (WoW).
Techtool Pro's test machine shows no errors.
My machine is a;
iMac
24-inch, Early 2008
Processor 3,06 GHz Intel Core 2 Duo
Geheugen 4 GB 800 MHz DDR2 SDRAM
Videokaart NVIDIA GeForce 8800 GS 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Hardwareoverzicht:
Modelnaam: iMac
Modelaanduiding: iMac8,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 3,06 GHz
Aantal processors: 1
Totale aantal cores: 2
L2-cache: 6 MB
Geheugen: 4 GB
Bussnelheid: 1,07 GHz
Opstart-ROM-versie: IM81.00C1.B00
SMC-versie (systeem): 1.30f1I am running Lion on a Mac Mini Server wherein I placed a Bootcamp partition and installed Windows 7 Ultimate. I've been testing Windows Media Center using a CableCard Tuner installed in a SiliconDust HomeRun box.
All was well until I received a Windows notification of an NVIDIA driver update. After the update, I now freeze at the same point that you do in the Windows startup splash screen.
I rolled back the driver using the Windows control panel associated with the device. Still freezes.
Windows repair does not have a fix. I can't get windows to start in "safe mode" so I can remove the additional apps that NVIDIA installed during the update.
I'm certain the freeze is associated with the NVIDIA driver. -
my phone doesn't even appear on my computer or itunes, it's stuck where the apple logo appears, I tried restoring it but it didn't work, it's still the same, how do I fix it???
Sorry but jailbreaking frequently has its problems. It voids the warranty and we can't help you in this Apple forum.
-
I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls advice.
Read https://discussions.apple.com/thread/4875757?start=0&tstart
-
My iPod touch got restarted and frozen on the apple logo screen after I erased all content and settings. And it got restarted and frozen again every 5-10 mins until low battery. It also doesn't recognize by iTunes. Did any one has the same problem? And how did you solve it? Thank you.
Try here:
iOS: Not responding or does not turn on -
Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?
8.2 is out...perhaps that will address your problem.
Barry -
My iPad hang/freeze with the apple logo. Hard to restore.
Hi all...
How to solve a frozen/crash iPad or restore it?
Seems like my iPad cant login into home screen (now only appears the apple logo).
When i press home+power, i connect into iTunes and detect the iPad for restore.
(in the iPad screen appears apple logo & usb cable)
And while iTunes download the firmware, disconnected while there is 55 min left.
After that, I can't connect my iPad to iTunes.... (now only appears the apple logo).
Thanks for helping.
Awi-Jakarta-IndonesiaAwi ~ This Apple doc may help:
_iPad: Unable to update or restore_
...You can find such support docs by searching here:
http://support.apple.com/kb/index?page=search
Maybe you are looking for
-
How to include Goole Map in PDF cfdocument
We have a Google premier license and use it to create maps displaying markers defined by database lat/long values. I want to include one of the JS API generated maps inside a PDF we create using cfsavecontent and cfdocument. However, the map canvas
-
Fb full screen caller I'd is not working
Hi experts, I was downladed the fb full screen caller I'd app and while sync it contacts it showing the error msg . Success SECURITY WARNING: Please treat the URL above as you would your password and do not share it with anyone. Please help me in res
-
Inconsistent Date Implementation in Apps (Yosemite)
After upgrading to Yosemite 10.10.2 from Mavericks (10.9.latest), I've noticed several inconsistencies in how dates are shown in various apps. System Prefs Settings: Short: dd/mm/yy Medium: d/mon/yyyy Long: d month yyyy Full: Day, d month yyyy Calend
-
Sharepoint 2010: Password Expiration - FBA SQL
Good Day Everyone We want our sharepoint site to have a password expiration functionality, when the users are logging in on our site, is this possible? if yes how? i'm using a FBA SQL membership and i have a custom login page for my sharepoint site.
-
Normal/stacked bar chart problem
hi, i have created a bar chart which has 2 bars for each customer. (the customer is on the x-axis). how i did this, is i created two formulas and placed them in the 'show value(s)' box in the chart expert. however, what i want to do is to have one ba