Apple logo frozen with loading
Hello, I wish to bring a problem to the light. So I had this Ipod, somehow it turned off. Now when i start it up, the apple logo comes up for 15 seconds, then the screen glitches and a loading thing comes up over the apple logo. I provided a picture of what it looks like. Please help!
Thanks,
Myles Balla
Here is the picture of the Ipod's problem
http://imgur.com/xMzX0Vb
Also it freezes like that until it dies.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
How to remove apple logo frozen with loading circle on phone
i cant remove apple logo i tried to reset phone pushing for ten sec and now it wont do anything just loading circle bar somtimes moves i have it on the charger when i connect to comptuer my computer is unable to find harware its like this for a week now on the charger frozen
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??
Unknown "source"? Do you mean unknown "error" followed by a number?
http://support.apple.com/kb/TS3221
Follow the instructions in the article. When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode. -
My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?
In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck. -
i dowloaded an app cant rember name but i was ment to be a jailbreak thing (typed in on sarfari jailbreak me) but it was not what i hopped for so i tryed deleting it (and an game boy app off this app) but no X came up on the corner so i tryed resating it but its now frozen and thers the apple logo and a loading bar under it ?
PLEZ HELP ME SOME ONETry forcing your iPod into Recovery Mode...
Follow the Steps in this Article...
Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao. -
When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!
... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ... -
My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?
What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564 -
Computer won't load past grey screen with Apple logo, even with OS Disc
I turn on my computer and only gets to the grey screen with the Apple logo and idling circle. After a while, it loads a small box telling me to restart, time and time again, no matter how many times I restart. I've tried holding "shift" to go into safe mode, it won't let me.
I believe it's originally a Tiger platform, and right now I think it's running on Leopard.
I just bought a Snow Leopard OS X Disc, and I inserted it and tried to let it load. It gave me the restart box. I held down "c" while starting up, got the restart box.
Held down "option", and selected the "Mac OS X install Disc"; it went back to the grey Apple logo screen to load, and gave me the restart box after several minutes. Repeated that and held down "c" while loading, still gave me the box.
Nothing I do with or without the OS X Disc is making a difference. I cannot load anything on my computer, period.
Can someone please suggest something for me to try?Well if you do then turn both computers off. Connect a Firewire cable between them. Boot your computer into Target Disk Mode. After the TDM screen appears boot the other computer normally. If your drive is accessible it will show up as a disk icon on the Desktop of the other Mac. You can then access your files and transfer them to another hard drive.
Then open Disk Utility. Your drive should appear in the sidebar list. Select the drive entry (mfgr.'s ID and drive size) then click on the Partition tab in the DU main window. Set the Partition Scheme drop down menu to one. Set the Format type drop down menu to Mac OS Extended, Journaled, then click on the Partition button and wait for the process to complete.
Your drive should now be OK assuming it's not mechanically damaged. Eject the drive from the Desktop as you would eject any removable drive and disconnect the Firewire cable. Shutdown your computer. You can now boot from the installer disc and install OS X. -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
My iPad only shows the Apple logo, sometimes with a frozen buffer logo as well. I CANNOT turn the machine on by getting past this logo.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black
Hey there mtriest,
It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
There is additional information in the article with further troubleshooting if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
nephew had mutliple tabs open and shut down the iMac by hitting the button on the back instead of closing everything corectly. Now the only screen i get is the white with apple logo and the loading circle icon. i have attempted restart and c key with disk in but cant even get a menu to come up. What can I attempt from home before having to haul this into the store?
wireless keyboard and mouse were working prior to safe mode attempt, i was able to eject disk. still waiting on the safe mode restart. I'm not sure what I should be looking for to confirm safe mode and what the screen should look like if successfully processing. it seems to be putting off a lot of heat. BRB
Message was edited by: FeydakeeeeenHelpMePlease -
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan
Maybe you are looking for
-
Can I use Mac Dictate to convert voice memos to text?
Can I use Mac Dictate to convert voice memos to text?
-
How to get the view in editable mode with OCA button.
Dear Experties, I am new to CRM WEB UI ,I have got the requirement to develope a view with OCA button on it and when i click on the button it should direct to the second view and it should open with edit mode. The Source view is table type and targe
-
Unable to create a distribution list
Hi all, I am trying to create this distribution list for a report and I am getting this error "The required entry variables in query ZABC_DEF_Q001 are not filled". When I click on this error I get another message Notification number RSRD 250. Also ap
-
Will BADI BBP_CREATE_REQ_BACK be called by program CLEAN_REQREQ_UP?
SRM gurus, We are in SRM 4.0 (SRM_SERVER 500). I use t code SE38 to run program CLEAN_REQREQ_UP in SRM to convert shopping carts into purchase requisitions in R3 backend. I put our customized codes in BADI BBP_CREATE_REQ_BACK and I thought that this
-
Should I use a case for my iPhone 5?
I have the iPhone 5 with AppleCare+. I am very carefull with all of my Apple products. I love the design of the iPhone 5, but am sadly using a case right now. Should I leave it on or take it off?