Apple logo keep flashing every 5 seconds

Why do my iphone 4 logo keep flashing and cannot be restored?  Tried many menthods but still it can't be restored. Please advise.
Thanks!

Hello pollyinmypocket,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best of luck,
Mario

Similar Messages

  • Apple logo keeps flashing and i cant restart because power button is broken

    My apple logo keeps flashing on my phone for about 10 seconds at a time. I know most of you will tell me to hold the power and home button but the problem is my power buttons broken. Also, plugging it into my wall and laptop won't do anything. I'm not sure what else to try, any advice is appreciated.

    There really isn't anything to do.  You'll need to bring your phone to Apple for replacement.

  • My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

    My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

    If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.

  • HT3529 my iphone 5 apple logo keeps flashing

    my iphone 5 apple logo keeps flashing

    abj1953 wrote:
    my iphone 5 apple logo keeps flashing
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I plugged my phone in to charge and the apple logo keeps flashing up what does this meen?

    i plugged my i phon einto charge and the apple logo keeps popping up and the phone wont come on, what does this meen?

    Hey alixwilliams,
    It sounds like you are experiencing a software issue with your iPhone that requires a restore. You might want to try the method for restoring your phone found in this article to help you address this issue:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht1808
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My iPod generation 5 was working fine then it turned it self off and it won't switch on or anything and when I put on charge the apple logo keeps flashing on and off. It

    Lastnight I was just playing away on my iPod and next thing it just went off, it was fully charged and everything. Now it won't come back on and when I plug it into the wall the apple logo just keeps flashing on and off. I have tried to reset it by pressing the on and off button and home button but nothing. How can I get it working again.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201412 apple logo keeps flashing

    the apple logo on my iphone keeps flashing and its been doing it for two days after i tried to uptade it to ios6 ive tried everything and it still keeps f;ashing what do i do.

    Did you try to connect in recovery mode and restore again?
    iOS: Unable to update or restore
    Has there been modified software installed prior to the update?
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • My iPhone 4s apple logo keeps flashing.

    I have to have my iphone 4s connected to the wall or my computer in order for it to do anything. The apple logo just keeps flashing on and off and doesn't go to the home screen . My home button doesn't work so i can't reset it, should i just go to apple. Would it be a mother board problem, or battery problem ? thanks

    Hey Melrobb1!
    Here is an article that I believe will be helpful for this issue. Perform the steps suggested in the article as a step of normal troubleshooting for issues similar to this:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My ipod wont turn on, it keeps dying even if i leave it in charge the whole night and then after it dies it wont turn on the apple logo keeps flashing on and off and it also doesnt let merestore

    My ipod touch 5th gen wont turn on. it keeps dying sometimes it would die even if it was in charge, once it dies it doesnt turn on it keeps flashingthe apple logo and so i put it to restore and while it was restoring it said that there was an error and that it couldnt restore my ipod so i took it out of chrage and put it back in and it showed that my ipod was dead so then after a while it turned on and it showed the connect to itunes sign i connexct it to itunes but itunes doesnt let me restore or update. so i took it out of the usb that was plugged to my laptop and it showed that it was charging but it was dead, i left it in chrage for 3 hours and i dont know what happend but now it completly wont turn on

    You said "while it was restoring it said that there was an error ".
    What was the wording of the error message?
    Also:
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT201412 My iphone keeps repeating unclean shutdown.  Cant get to my screen to do anything. The apple logo keeps flashing on and off.  Can I restore or is phone done.

    I cant get my iphone to turn on. The apple logo goes on and off intermittently.  Avery small line of words stating error'unclean shutdown.  It ssms like it is frozen or locked.  Is there something I can do to restore my phone screen? I recently updated to IOS 6.

    What happens when you try to restore?

  • Does the apple logo keeps flashing on and off while restoring

    My ipad fell in water and went blank i tried restoring it would show a hardware problem.I got that fixed but it kept showing not charging sign then i forgot my pasword and tried restoring it to the factory setting but mid way it said ur ipad cannot be restored but the restoring process kept going on with the apple icon flashin one too many times in between. please advise.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT4623 Updated from ios5 to ios6 but its been a day and the apple logo keeps blinking every minute

    Using iphone 3gs
    Please help

    Hey Raffy613,
    Welcome to the Apple Support Communities. Sorry to hear about your issue, the issue sounds like the install did not take. The following article will assist with restoring and reinstalling the operating system on your iPhone.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

    I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

    Hello khanhlinh98,
    I would recommend performing the following steps in order to stabilize your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see the battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success.  have tried this many times and kept connected for several hours.

    I have a classic, several years old.
    It will not recharge; the Apple logo flashes every few seconds then disappears. 
    I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success. 
    I have tried this many times and kept the ipod connected for several hours.  And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

    Hi enbridge4,
    If your iPod Classic won't charge or turn on, you may find the following articles helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/ts1383
    Apple Support: iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    Regards,
    - Brenden

  • Apple logo keeps on flashing and blinking but it doesnt open to homescreen

    hi guiys, i need help before bringing my ipad in the apple service center. While using the ipad, the ipad shut down, and the apple logo keeps on flashing and blinking but it doesnt lead to the homescreen, after the blink, it goes black and apple logo blinks again.

    Try the following:
    1. Reset: Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo.
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Customer Master with SQVI

    Hi, I am trying to create a Report in SQVI for list of customers, but can anybody guide me the steps, if I am trying to join tables : KNA1, KNB1 & KNVV. System is allowing me to join but no data is populated at the time of execution. Rgds, Indrajit

  • How do I make a multi-line heading show up as a single line in the Table of Contents?

    I'm writing a document where the headings often have a line break in them for the sake of formatting. When I generate a Table of Contents, they show up as two entries on the same page instead of as a single heading. For example, if I have a section l

  • PSU for the HP s5300z

    I am putting a new video card into my s5300z and need to add power. I understnad this pc has 220W and the new vid card requires 350W. How do you add to the PSU? Does the current one get pulled and a new one put in it place or do you simply add an add

  • Adding a field to a Repeating Frame in Oracle Reports

    Hi, I have a report that has 4 repeating frames. At the lowest level (Level 4), I have several fields to do with school swimming sessions - Session Start Time, End Time etc.. I want to add a field to that frame for Session Notes, and have tried doing

  • Is direct upgrade from 2.0 to 3.2 supported?

    I couldn't find anything in the manuals about supported upgrade paths, so I gave the upgrade a go but @apexins failed with a whole load of errors (which I didn't capture :-() Before I go back and pick the bits apart and try again, is it supported to