Apple logo randomly comes up when I hit the select button

When I am selecting songs on my Ipod, sometimes the apple logo will come up and stay on for about 5 seconds when I push the select key. My ipod is a Nano, 1GB. Does anyone have any ideas?

Idea: Post this on the iPod Nano discussion boards.

Similar Messages

I'm getting a random beep sound when I hit the input button to record a turntable

I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

Thanks Jim,
Seems to be this song. Other projects don't have this issue.
I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
I've bounced each track solo, listened and NO click at the 13 sec. mark
No third party plug-ins.
The click doesn't land close to any beginning or end of a region.
Final mix down looks good, no peaking over 0db.
This is making me nuts!

My macbook shows a only white screen with apple logo and spinning wheel when i on the power button? How can i correct that?

Any help!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again. Any ideas?

Welcome to the Apple Community.
Have you tried turning the TV off and on again.

All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time?

My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?

My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?

Hi..
Try Resetting the System Management Controller (SMC)
If that doesn't help, try Troubleshooting MagSafe adapters
When you post, please tell us which Mac OS X you have installed. Thanks

When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

Question
When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

The Cannot Setup Sync message indicates that you don't have internet access. Check that you can get your phone online (3g or wifi) and then try to connect again.

HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
Will the data on my iPhone be preserved?
No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
copied from Apple - Support - Service Answer Center

When I try to play some of the songs in my itunes library, I get a prompt saying the file could not be used. When I hit the "locate" button, it still won't locate the file. I didn't delete any of these tracks and there is no common link between them.

When I try to play some of the songs in my itunes library, I get a prompt saying the file cannot be used. When I hit the locate button, the file cannot be found. I didn't delete any songs/files and there is no common link between the missing songs.

Hello there, Paso Kid.
The following Knowledge Base articles provide some assistance with locating content in your iTunes Library:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
and
Where are my iTunes files located?
http://support.apple.com/kb/HT1391
If you have already reviewed those steps and still cannot find the songs you purchased from iTunes, delete the songs and download them again using the information in this article:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

TS1367 My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

I have a currently updated Mac that's fast as lightning. I use eBay A LOT. In the newest version when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

Hello,
I have a Mac that's fast as lightning running on the latest version of OS X. I use eBay A LOT. In the newest version of Firefox that I just downloaded when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

Thank you for your kind words on the Tablet, as this is the only product mentioned that is supported on this forum, The forums here are for Home Electronics and Computers, and do not reach the Sony smart phone community.
The Sony smart phone Support Forum is the place for Sony (formerly Sony Ericsson) users from around the world to get help and help others:
your very in depth suggestions and comments would best be heard at the following forum that is dedicated exclusively to the Sony smart phone community.
http://talk.sonyericsson.com/community/support

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tks

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

How much free space do you have? If it is low, installers may not be able to run properly.

Firefox doesn't retry downloads when I hit the retry button.

i will be downloading something and it will freeze and stop downloading so i hit pause and then when i hit resume it comes with a message saying the path is unavailable or something and ends the download. then when i hit the retry button to retry the download it just goes through a quick scan and ends it right there with a partially downloaded file that nothing can be done to.
== This happened ==
Just once or twice
== i was downloading a video/part file

There is something you can try when this happens..
Go to your downloads folder location. If the download has failed, Firefox may have created a .part file. If your file is ''largefile.exe'', look out for ''largefile.exe.part''.
Now basically all you have to do is go to the downloads page and start downloading your file again. This time pause the download, go to your downloads folder.
Rename "largefile.exe" to "oldlargefile.exe".
Rename "largefile.exe.part" to "largefile.exe" obviously replacing the name with your own file.
Now resume your download. It should continue from where it left off.

Apple logo randomly comes up when I hit the select button

Similar Messages

Maybe you are looking for