Apple Loop Playback problem  ok only at 44.1k

Aloha, Just discovered after having all my loops reindex themselves all by itself and throw out all of my imported ones, I have found that the loops "skip" {don't play all of file} unless my Session is at 44.1. Of course I have been running at 96k. Won't play right at 48 either and is not a Logic 32 or 64 bit issue. Used to play back ok but since last OSX update this starting happening to me and others. Loops play fine dragged on to track. Garageband is on;y 44.1 so no problem. Anyone else Have the same issue? I think it is an OSX bug that will drive us LOgic folks crazy.. Loop browser is not operating at any other level than 44.1.

Anyone else Have the same issue?
Yes, this is a known bug with previewing loops in the Loops browser (when your project is not set to 44.1). The best you can do is drag them into Arrange for the purpose of previewing them. As you mentioned, they play fine once they're in the Arrange window.
Either that, or just stick with 44.1. It's too bad, but that's the way it is right now.

Similar Messages

  • Apple loop playback question

    If I have an apple loop which I want to play at twice the tempo of the song I'm using it in, how do I do it? My song is at 80 bpm and when I drop my apple loop in I want it to play back at 160 bpm not 80 bpm. Is there an easy way to do this?

    - solo the audio track w/ loop in it
    - set logic to 160 bpm
    - bounce the loop & add to audio window
    - set logic back to 80 bpm, create new audio track & insert bounced audio
    - un-solo

  • Apple tv playback problems

    Ok I am really getting sick of this. I have an apple tv on a time Warner Internet connection. ( 15-25 megs down )
    I rent a movie and start to watch it and it just stops. Then I see your movie will be ready in 15 min or something like that. It was so bad that i couldn't even get past the first few min of a movie and I just rented it from timewarner. ( I tried to get a refund but I couldn't find any place to do that but I digress )
    Also the playback of my netflix pauses every 2 to 3 min. Very annoying.
    I have checked my network and nothing is running or downloading. I am not using wifi.
    I have a business class router and a hp managed 24 port switch. All cat 5e cable
    And store bought patch cords that I have tested.
    I have a blueray DVD player with Netflix and there is no problem watching movies on that device.
    After a reset of the apple tv it seems to work better but the problem comes back.
    Any thoughts? Thanks in advance!

    Here's some help for the digression point - getting the refund. Follow this link to the claims form for a refund.
    http://www.apple.com/support/itunes/contact.html?form=video&topic=Video%20Purcha ses&subtopic=Lost%20or%20Missing%20Items

  • Apple tv playback problem

    rented a movie which took six hours to download yesterday. Tried to watch it tonight but it statred to download the whole movie again. Any solutions?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
    If your internet connection is too slow, you might consider downloading only SD content or downloading to a computer.

  • Apple loops audio files wont play

    I can listen to previews of the loops but when I drag them to the arrange area, I hear nothing. I can see that they are working but cant hear anything. The green instrument apple loops work fine, its only the blue ones that dont work. I also cant hear anything that has been recorded using a usb mic. I have everything set up the way the manual tells me too, and it will record and I can see that it is playing i just cant hear it. How do I fix this problem. I have Logic Pro 9 and Snow Leopard.

    I have not changed any settings on my own as I am very new to the whole music recording thing and have no idea how to get technical. All I have done is installed the program and followed the "try this" in the getting started manual. It seemed to work just fine the first time I put something together. I restarted my computer because it was seeming extraordinarily slow. When I reopened logic and attempted to create another beat only the green loops could be heard. Although you could see the meters moving on the blue ones no sound could be heard through either the built in speakers or headphones as I tried both. I can still click on the blue loops while they are in the loops library and I hear them just fine. As soon as they are dragged into the arrange area, I hear nothing.

  • Regarding apple loops that come with GB

    I recently had help with reindexing my apple loops. After deleting all my loop indexes for both the Apple loops that came with GB and the ones I've bought from other sites, I dragged all the loop folders back into GB. I had no problems with dragging the user loops (the ones I bought) and reindexing them. However, for some reason, the apple loops folder that came with GB will not reinstall. The window comes up after I drag it into GB that it is reindexing and then the window comes up with me needing to sign in to ok the process. But when the reindexing is done and I go to show all to see if the apple loops are there, the only ones I can see under show all are the ones that I bought and downloaded. What is weird is that my apple loops that came with GB are on my hard drive as when I click on that folder (Mac hd/library/audio/apple loops/apple/apple loops for garageband) they are all showing there. I can click on them and the demo plays. When I check in the same path but choose apple loops index instead of apple loops, there are no indexes to be found (as should be as I dragged them earlier to trash), but obviously it means the reindexing wasn't done even though the window showed that the process was taking place. I still have all the indexes removed from both apple loops and user loops in my trash. I don't want to delete them in case I need to put something back to fix this problem.
    Any help for me with this? I did do disk utility/repair permissions, but that doesn't seemed to have helped that problem as the list when it was finished did not include anything for GB. I really need to get these loops back in as I already have songs done for leading worship that need those loops.
    Again, any help would be needed and much appreciated.
    Steve

    Let me know how it went if you do
    i can't say i'm any clearer on the issue. another intel mac lists the premissions as
    system Read/Write
    admin Read/Write
    everyone read Only
    and a PPC shows
    me
    system
    admin
    others
    all as Read/Write
    maybe I should now remove myself from having permission to do it
    without a more solid knowledge base from which to draw, it just seemed like a good idea. before i made a change like that and left it, i'd want to do a bit of reading on why permissions should/would be set the way they are. iow, find out if there's a reason i'm not listed, and granted full access as an admin.

  • Can automator turn thousands of samples into Apple Loops? (VSL rep/runs)

    Hello everyone,
    First off, I'm familiar with how to build my own apple loops and find them to be VERY useful, especially in the application I'm about to describe. However, I find it quite tedious to build them manually, especially when dealing with thousands of samples. Thus I'm looking for the best/easist way to create apple loops, hopefully using Tigers "automator."
    Heres my situation: I use/love VSL sample libs, which contain many articulations/phrases, but some of these are "tempo specific" such as the numerous instrument runs, repetition files, glissandos, crescendos, etc, and when doing a film score I cannot let tempo specific files dictate the tempo of the piece (the film does that). Thus I've started taking some of the VSL samples (especially the repetition and runs) and turning them into apple loops, which conform to the tempo of the piece. Within reason, the results are WONDERFUL allow me to continue to use these very realistic phrases at almost any tempo!
    However, I've grown tired of manually converting these files to apple loops, and thus have only converted a handful of these phrases into apple loops. Whats worse is when I'm forced to stop the creative process to turn a phrase into an apple loop only to find that after all that time creating the loop, it doesnt work!
    Is it possible to use Tigers automator to automatically convert .wav files into apple loops? This would be a great time saver, and would possibly allow for turning the thousands of samples into apple loops. Anyone currently doing this type of thing? Is it worth it in the end?
    Thanks in advance for any help/tips you can provide.

    Hi Jonathan,
    You can use Logic to create AIFFs of these files very quickly.
    Then, open them in ALU.
    Select all files.
    Change 1 field.
    Save.
    You now have Apple Loops -- they will have a few few things automatically inserted such as guessed tempi -- they will almost always be set to 4/4 to the tempo closest to 120(?)... but they will load and many will load usably for your needs.
    Now, I don't know exactly what you are facing with this concept but it sounds like a very big job and this will still leave much time hand tuning. If this is true, I recommend you have a look at Accelerando:
    http://www.eigentoneresearch.com/Accelerando.html
    Accelerando contains several tools which will substantially decrease the tedium - and yes, it does use Automator. It works directly with Logic Pro, Apple Loops Utility - and more. Ultimately, you may be able to create workflows which handle this task with 1 gesture per Apple Loop - although a large library of workflows would be required to accomplish this to most users expectations so 2 or more gestures is more likely. of course, you can try to set up a more intelligent scheme if, say, the files can be filtered by an attribute such as their name.
    J
    Per Apple's TOU, I am required to state my affiliation with Eigentone Research.
    I Developed Accelerando

  • New Apple Loops aren't showing in Loops Library.

    After adding gigs of sample libraries to the Apple Loop folder this morning, only the drums/drum kits of those libraries are showing in Logic's loop library. I've already deleted all of the index files, reindexed the library several times, and it's still not showing anything other than drums, even though in Finder, all of my samples are there. AIFF and Wav.
    My sample libraries added prior to this morning still work. I have over 120 gigs of samples. I'm not sure if Logic has issues with large libraries or not, but this is a bit frustrating. Maybe someone can help? Thanks.

    It does not work. Mav even if the files are converted to AIFF it can only be seen in the Apple Loops Utility. You can not see them in Loops browser in Logic.
    Give me better way !

  • Apple Loops from Regions problem...

    Greetings,
        Having a problem when I add a region to Apple Loops in Logic Express 8....
          I've read some similar threads, but nothing that answers these issues..
        After creating a region using the Ultrabeat or a synth (all internal), I'll select the region and go up
           to the 'Region' drop down menu and select the first option, 'Add to apple loops library'...
         I came across this process naturally and it seemed to work fine, but then some of the loops created
             acted differently than others.  When I drag some of them into the Arrage area, and press play,
                they will playback no matter what position they are at.
            For example if I have a beat that starts at 1., but I have the recently added 'problem' loop at 4.,
              this 'problem' loop will play back from 1 as well, no matter if it's at 4, or 24...
           I'm not sure why this is happening to some and not others....???
              Did i accidentally do something to these that I didn't do to the others?
           Also, I figured I'd just delete them and create new ones, but then I couldn't find them ANYWHERE
              on my harddrive!!!???   I really don't get this one...
             I've read about the Apple Loops Utility now and I guess i should use that for future loop creation?
                I really don't understand how the loops I made are no where to be found, not even in the
                     Apple Loops/User Loops folder....
             Would really, really appreciate if someone could help w/ this conundrum!

    Ouch.... That's a real bummer.
    I would recommend trying the "re-conversion" with just a few loops and seeing how it works for you. I've had to do this before as well. I had a library from L7 that I had converted using ALU inside L8's arrange window. For some reason, the loops that I had never used in that project that I had converted were not converted after I deleted the project that I used them in... make sense? not to me either....
    The whole Apple Loop Utility is awesomely useful sometimes and buggy to the point of frustration at others....
    Also, is there any consistent pattern to the "off-timeiness" of the loops? (i.e: only midi loops, only audio loops, only slows down, only speeds up, "choppy", etc...)

  • This content requires HDCP for playback problem! Apple TV2

    Owned Apple TV for two weeks. Two weeks ago, everything was fine for films already in my iTunes library.
    This week, when selecting play on a movie, I get the message 'This content requires HDCP for playback problem' inconsistently. Some vids work, some don't. Then they do then they don't! I have tried on a Samsung TV and a Sony Bravia? Same for both!
    How do I resolve this. I have tried different HDMI ports, turned Apple TV 2 off and on. Tried different cables (Although my HDMI cable is the one I purchased from Apple).
    Any suggestions? Is it something Apple need to fix? This is kinda embarrassing when I tell friends how good Apple TV is, get them round to watch a movie and inconsistently get this.
    Many Thanks for any help
    Dave.

    I too sadly have this handshaking issue. I'm in Phoenix, AZ. Day one buyer for ATV2. Worked all of about two days in terms of streaming HD content from either my MAC or netflix. About the third time i tried to stream HD content from Netflix or Blu Ray digital copies from my Mac, I get the HDCP compliance message stating my display is not authorized.
    I have tried every concievable combination of unplugging and rebooting of TV (Samsung 2005 DLP), ATV2, and HDMI switcher (Monoprice) and nothing will work. My DirecTV HD-DVR works like a charm. If I rent an HD pay per view from DirecTV, no problem. If I rent an HD movie on iTunes, won't display it due to the HDCP issue. I've NOT ONCE had an issue with my DirecTV HDDVR having an HDCP compliance issue and of course its connected to my TV via HDMI thru my monoprice HDMI four port switch.
    I guess the only other thing I could try is exchanging the unit itself. But everything else works as advertised. It feels like this is just a software issue that needs to be patched, and fast.

  • "Only files in Apple Loops format will be shown in the loop browser".

    I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
    After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
    What do i do?
    Please help.
    Thanks
    Rohan

    I've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
    Comes along with Result Code=-43.
    I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
    My process:
    Take original audio.
    Flex it using slice mode.
    Bounce in place.
    Drag new region into Loops browser.
    Errors ensue.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Loop Problems. There are no Apple Loops installed on your System.

    When I first open Garage Band I get a message that says
    "There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package"
    Where is the Loop Package, how do I reinstall it, and overall.. how do I fix this problem?

    WH,
    I did and with no luck. But I was able to solve the problem.
    What I found out was that the folder under the main library has the wrong rights which wouldn't allow the index files to be updated.
    So, I change the Audio folder and all enclosed folders to allow All Others the ability to Read/Write. I deleted the files out of the Apple Loops Index and launched GB. I dropped a loop onto the loop browser and the index was rebuilt.
    Eventually I copied the Jam Pack folders over to the Macintosh HD > Library > Audio > Apple Loops > Apple folder. Then dopped another loop on the loop browser for the index to be rebuilt again. Doing this allowed all users on this computer to have access to the loops.
    Race.
    Message was edited by: Race Proffitt

  • Problems with indexing and Apple Loops on External Drive

    Ok, so I've recently moved my entire "Apple Loops" folder to an external drive and created an alias pointing back the "Audio" folder where the apple loops folder used to reside. The problem is when I bring up the loop browser, it's not finding the loops. Do I need to move the Apple Loops Index to the external hard drive as well? I assumed by creating an alias, it would just go to my external drive.

    Someone had said that it's better to use the alias for the apple loops since Logic will always go to where it expects the loops to be first. Which I'm assuming would be faster. But, if it truly doesn't matter and I should just drop all my apple loop folders one by one from my external hard drive, then I"ll do that. Anyone heard about what's faster....alias Vs. external HD direct path?

  • Midi Apple Loops Problem

    Hi,
    Im having some issues with the midi apple loops loosing some effects that are heard when previewed in the media section, then once dragged into the arrange it'll loose for example a prevalent reverb and other notable sonic qualities...even when the plug-ins that are usually bypassed once dragged into arrange window are activated its still lacking from the preview loop heard.
    Wa gwahn?

    This is normal behavior. If you want the midi loop to sound exactly like auditioned in the preview you will have to create an audio track and move the midi region onto the audio track, and then it will sound exactly the same.

Maybe you are looking for