Apple Loops not installed

I recently purchased iLife 06 and installed Garageband 3 on my old Powerbook Titanium G4. The application runs, but when I start it up I get a message that Apple loops have not been installed. Strange. I searched my hard drive, and sure enough, they are not there. So, I reinserted the install disk thinking that I would do a custom install and just install the Apple Loops and whatever sounds I wanted. However, when I go to the custom install screen, installing Garageband and it's subfolders is not an option. I can select and deselect all the other iLife apps, but Garageband does not give me the option to select it.
I thought maybe I should do an uninstall/reinstall of Garageband, but I'm not sure how to do that, or if it would be successful. I'd rather not have to do that. I read in a forum that I should be able to do an uninstall from the install disk, but I have not found that to be an option with my install disk.
any thoughts?
thanks.

Move everything with a name containing GB or iLife out of that folder; if nothing in that folder matches those criteria either, create a new folder on the desktop and move everything in the Receipts folder to it, or use Pacifist to extract the content.
(33635)

Similar Messages

Third Party Apple Loops not being shown in Loop Browser.

Hey Everyone!
I posted this in the GB forum but nobody answered... maybe here someone can shed some light on this issue.
I am a quite experienced user of GB, Logic and Soundtrack, and usually I find the workarounds for these kind of problems but I'm stumped here.
-I've recently got 4 Big Fish "JamPacks" with a lot of apple loops (they were purchased as "apple loops" and they came in a folder called "apple loops")
-I installed all of them in /library/audio/apple loops (this is my default location for ALL my apple loops)
-I trashed the search indexes from /library/audio/apple loops Index (the only location where I have search indexes on my computer)
-dropped the entire "apple loops" folder in the GB loops browser.
-all the previously installed loops show up but only three of the new packs show up on the loop browser, the fourth one is nowhere to be found.
I tried reindexing three or four times in different ways
I also tried dropping just some of the apple loops of this particular folder directly on the loops browser and still no luck.
Actually, these individually dropped loops appeared in the /library/audio/apple loops/user loops/single files folder, so GB took them. but they are not found in the loop browser.
what's going on?
Why other identically crafted loops in the same folder (but not the same subfolder) are indexed but not these?
Could it be that they are wrongly formatted or not formatted at all as Apple Loops?
How can I check that?
Any Clues?
Cheers!

still nothing....
Now I have an update: I ran some of the loop files through Apple Loops Utility and a a first glance, they are not tagged...
Is there any good way to be sure they are/aren't formatted as apple loops?
Shouldn't the loop browser take any .aiff file even if it is not tagged?
I appreciate ANY input at all... I'm shocked.

Apple loops not folloiwng key changes

They follow tempo changes, but not key changes. Using both "green" and "blue" loops from the Loop Browswer, as well some audio takes I recorded and converted to Apple Loops using the Loop Utility. Same result for all.
Ideas? Thanks.

thanks.. heres a another question now that i have it making the changes.
is there a way to select what follows the changes and what doesnt. for example
I edit my drum tracks in phatmatik and then bring the midi files into logic. I don't want them to change, because the drums sounds would be off and in some case triggering no sounds.
thanks

Apple loop not responding to tempo changes

apple loops that have been created from an audio file in the arrange window do not respond to tempo changes. when i had logic 7 there would be a change in the audio file from an audio to an apple loop icon. this is not happening w/ logic 8 although it appears to be saved in the apple loop window but still i have no access to changes being made there as well. what is thew problem?

http://discussions.apple.com/thread.jspa?threadID=1793992&tstart=0

Apple Loops not dropping onto track area

I hope someone can help. I just upgraded to GB 11 and downloaded over a gig of apple loops. But whenever I drag a loop onto the blank track area it absolutely will not drop and creat the track as it is supposed to. I can demo all loops, and I can drag one over, but it "sticks" to my cursor and will not drop.
I have a MB Pro 2.4 GHz with 8GB ram, running OS X 10.6.8
Anybody know a possible solution to my problem?
Thank you.

Weird. The same thing just started happening to me, but the loop sticks to my cursor and won't drop. I have to force-quit GB for christ sake. As I write this I see the small title of the loop superimposed onto my Safari window. What a weird glitch.

Apple will not install Internal Bluetooth Module, now what?

ibook was purchased without BT installed, so i purchased the appropriate module from the ebay (item # 922-5764) thinking that i had the type of airport card that could be paired up with BT... WRONG!
so anyways i look into the matter further and discover that in addition to having to take apart my iBook to install the part, i would need to purchase two more parts- antenna (922-6256) and cable (922-6188), which by the way would end up costing me more than the module itself!
Ok, no problem, i'm determined that i can do this install. I taught myself how to install PCI cards back in the day, and later how to upgrade ram, processor, even a logic board on various desktops. But WOW does taking apart an ibook look like way too much work.
So i call Apple to find out how much they would charge to install this for me, but it turns out that even though this was originally an optional install, they WILL NOT install it after the fact.
I already have a BT Dongle, but I really really want to have it internal. what are my options at this point? any ideas??

...I already have a BT Dongle, but I really really want to have it internal. what are my options at this point?
The options seem pretty clear:
Use the BT dongle.
Disassemble and install the part yourself.
Find someone who will disassemble your iBook and install the part.

Apple loops not getting saved with current projects tempo

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Apple loops not getting saved with tempo info

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Loops not installed properly

I have GarageBand 8 on config below. Not all the loops are available - many are greyed out. If I click on any of the greyed options a dialog box comes up saying "you have already initated the installation of additional content for GarageBand via Software Update. For additional information please open the Software Update application'. I do, and the last reference to GarageBand Log Entry says "2007-10-20 12:09:45 +1000: Installed "GarageBand Update" (4.1)." Other than that, nothing. GB seems to have initiated a process which hasn't been closed. It won't give me the option of installing from the DVD again. What to do.

http://www.bulletsandbones.com/GB/FAQPages/NoLoops.html
(About every 2nd thread in this forum is about this problem. It's always a good idea to do a search before you post a question. Saves other people time.)

Pages purchased via Apple Store not installed in MacBook Pro

Hi, I bought a new MacBook Pro recently (Mac OS X Version 10.7.4). I purchased Pages via Apple Store and click the 'INSTALL' button. After that I found that Pages is never installed in my computer (I check the applications folder and could not find pages installed in it). Can anyone help me out.
Thanks in Advance.
Dina

Dear Jerry,
Thank you for the reply. Sorry for the delay in replying.
You are right. There is an application in MacBook Pro (Lion) with the name App Store.
I purchased the software using this application only.
I am sorry. I did not purchase it online in apple online store. I purchased online through this application (App Store).
Finally, I figured out. I had a previous installation of iWork in my MacBook Pro (Lion). I read in the internet
about this and came to know that I should go to Library/Preferences/ and then delete Com.Apple.iWork.
I did this. Rebooted the system and then tried to install. I was successful and now Pages is installed.
Thank you very much for the help.
- Dina

HT202436 Apple Configurator not installing updated app versions

Hello all,
I have noticed that when i complete a batch of Ipads using Apple Configurator that apps installed on ipads are marked to be updated.
Before commencing using Configurator I have no apps which require updating in iTunes so I am wondering do i need to "purge" older versions of apps and import updated versions.
Configurator version 1.7.1
Itunes version 12.1
Mac OS 10.10.2
(Imac 2.66 early 2009)
thanks in advance,
Jon

Following advice - i have removed and reimported updated applications to Apple Configurator this worked without a hitch - i was able to import the latest versions of 10 applications but..
Upon refreshing one device I was not able to install Garageband even though the codes and application previously loaded about 5 minutes before. I then stopped the update because it had failed. After a period of time process stops cleanly. Message in configurator is "insufficient license codes" to install the Garageband.
Ok getting used to this game (not fun) but it fills in my day! Click on the application in Apple Configurator and import redemption codes (again). After a period of time (long) the message "Finished importing Redemption codes" appears but does not disappear - ie complete. Apple Configurator is now frozen.
I Force Quit Apple Configurator, all changes (work) is lost and possible the configurator database is now corrupt. I also now have the bonus of trying to fix another problem to fix.
Whilst the advice above is good & i am not critical of those who replied and would like to thank them. I am nearing the end of the line now with Apple Configurator

Apple Support Not Installing on Computer, Ive tried everything to my knowlegde, it keeps rolling back changes. Ive completely deleted itunes, bonjour, and even the folders in my C://Program (86x) folders in regular program folders. Even ran ccleaner

Any other methods? Like I said Ive tried all that i can. Even removed some windows updates, programs, and still not working. sometimes itunes wont install but thats got to do with my msi installer. Ive done the "run msiexec /unreg then msiexec /regserve" then close explorer.exe and reopen as administrative to install. Itunes would install but when I plug up phone nothing. Went to device manager it doesnt even show Unknown device but I still reinstalled Device manager with the system command. even tried to install older versions of itunes but for some reason I cant install versions lower than 10. Rebooted computer and device with fresh install and nothing. At one point it even showed "Trust Computer" but didnt do anything. I have an Iphone 4S that even stop working. So now I can't use that either. Any Idea whats going on ANY one?

Are you using a Windows machine? We are mostly Mac users here - there is a forum for Windows software on Macs, so you could try that forum or iTunes for Windows forum which might be your best bet:
iTunes for Windows

Apps wil not install

I had a Palm Pre Plus phone and I dropped it and the screen broke. I had an old Palm Pre Plus and activated it. When it activated it would not install all the apps such as Pandora, I purchased a new Palm Pre Plus and activated it and many appls would not install. The new app catalog would not even install. What do I need to do?

You need to install the App Catalog update.
See the post above yours titled, "App Catalog not working?..."
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

All drum loops in LE 8 are greyed out and Apple loops utility 'can't be installed'

Hi
I installed Logic Express 8 and have loads of loops missing, especially the drum loops.
Even the Apple loops utility is giving me problems. It looks like the Apple loops utility was installed (because I have the icon for it now), but everything inside that utility is greyed out. When I try to re-install it, i get the error message 'Apple Loops Utility can’t be installed on this computer. The specified message could not be found for the index 0.'
I have a new MAC Mini OS X 10.6.7
Help would be appreciated.
UPDATE: I have looked through other related discussions here but could not find the naswer.
I also just checked in /Library/Audio/Apple Loops/User Loops to see if the files are there and of course they are not.
In fact, funnily enough, there are 0 files in the apple loops (although I do have plenty of loops that do play in LE8, just not the drum loops), which is strange. Where are all the files?????
I also found the following interesting point in the discussions here:
'The standard installation doesn't install all the loops. You'll have to do a custom installation and check the GB extras.'
The problem is that I am never given any option to do a custom installation when I install. It only offers the normal installation mode.

Hi,
1. On the newer Macs, iLife 11 or so, only a part of the loops is being installed, and the other part must be downloaded via software update. GB will tell you so if you select a greyed out loop.
2. Loops should all be in "(your HD)/library/audio/apple loops/apple", not in the user library.
3. If you find the loops are installed there but aren't shown in LE or in GB, you might want to re-index the loops.
4. If loops are still missing after re-indexing, drag the loops folder straight above your loop browser and drop them there - this should add the missing loops.
Fox

Loops are installed, but not in Loop Browser

Hi All!!
I have just bought the four (newly packaged) GarageBand Jam Packs. I was so impressed with the demo "song" Victory (Full), that I have decided to use those loops for a project I am working on.
The "Victory" loops all play in the loop browser (all 137 of them) when I have "Victory (Full)" loaded for playback in GarageBand.
But.......
When I start a new project, the Victory loops are not available in the loop browser. This is rather perplexing for me.
What do I need? I need to find a solution to see these loops and maybe others that are missing (but not missing).
Thanks in advance for your help.
Rodger GW

Yes. The demo song is in D, and I have ensured that I have set the new song to be in D.
I have also trashed the preferences, trashed the indexes, rebuilt the loop browser by dragging the loop folders from all sources (sources being those defined by the install script), and ensured that the Keyword Browsing is unckecked and I have reset the keyword layout.
The only thing I have not done is the laborious task of importing each of the 137 Victory files into the the track window then translating each individual part as an Apple Loop. The reason for this is two fold: 1. I am on the lazy side of life and think there should be a quicker way; and 2. I have checked the other files contained in Library -> Audio -> Apple Loops -> Apple -> Jam Pack 4 - Symphony Orchestra are available in the loop browser under the Jam Pack 4 and the Loops Pull Down Menu.
I am very unsure of the next thing to try.
Rodger GW
PS I have even tried to have those loops from the "Victory (Full)" file be selected as favorites. They now reside in Home -> Library -> Audio -> Apple Loops -> User Loops -> SingleFiles, but do not appear in the Favorites tab in the Loop Browser in any new project.
Thanks in Advance,
RGW

Apple Loops not installed

Similar Messages

Maybe you are looking for