Apple Mac OSX 10.7 scan to smb?

Please assist me. I have an apple mac osx 10.7.1. i am unable to get scan to smb working. I have enable smb scanning and setup all directories. I am able to browse the folder from a win 7 environment but unable to connect to the folder from Ricoh MPC2000 copier?

Wowzah. Not directed at you, but, like ouch!
£15 to have a minor OS refresh and bug fix, from a corporation with $$$ in cash in the bank, seems a bit tight to me. Talk about making Microsoft look generous.. sheesh.
I run 10.8 on my MacBook pro and need 10.8 to run the xcode 5 dev tools on my work mac... I thought it would be a simple download, didn't realise we'd have to pay? Frankly the differences are in no way deserving of any price tag!
Apple - try being more generous, people might like you more instead of just resenting every time we have to deal with you. The only fun bit seems to be walking out the door with the shiny new thing.

Similar Messages

Applet in Apple Mac OSX problem

Hi all,
have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
ArrayIndexOutOfBound, 0...
but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
_______________________________FireFox_____Safari_____IE
_______________________________Win | Mac_____Mac____Win
1. load applet for 1st time___________OK_|_NO_____FAIL____OK
2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
3. when applet button click (security)___OK_|_NO_____-_______OK
p/s: all above test was using same applet with same parameter and value.
below is the sample i capture from Apple Mac just now:
http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
Message was edited by:
ahbeng78

i has a loading problem saying that
init failed to load ArrayList as error message
said:
ArrayIndexOutOfBound, 0...Well, post the stack trace.
but when i debug print out the ArrayList content and
its length, i'm sure that this ArrayList is NOT NULL
and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
try it in Mac, it show only a part of applet without
any error, but when i try to refresh the page, applet
is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
lastly, when a button of an applet being click and
this will bring a new window with some parameters
value, its work on IE in Windows platform, why it
won't work for FireFox or Safari for Mac? i see
prompt out saying is security problem, is there any
workout of this? thanks. to summary out of junk
above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.

6280 Theme builder on Apple mac OSX?

is there a theme builder available for apple mac OSX?
i would like to change the theme but cant seem to find anything to do the job.
thanx
LP

Hi,
you are looking for PhoneDirector. Go to VersionTracker.
Jim.

Stuck with Apple Mac OSX 1.7.2 update!

My MacBook Pro Early 2011 is stuck on the Mac OSX 1.7.2 update.
I ordered Lion OSX from App Store about 2/3 months ago.
It says:
Software Update
Installing 3 items
Progress Bar
This may take a few minutes; do not shut down your computer.
And it has been going about 45min. on the same screen.
And i don't have a Time Machine recovery and don't want to lose my data.
PLEASE HELP!!!

I have solved my problem!
I just shut it down with the power button.
Waited 10 minutes (i kept trying before but did not start up).
I started it then it restarted about 4 times then it started up with all my data.

How to find and install icon in dock for access to Apple Mac OSX?

Just next to my downloads and document stacks I had an icon Apple Mac OS X icon that when clicked automatically transferred me to Snow Leopard site at Apple. By mistake I removed it from dock but now I can't find this icon to re-install it. I looked in applications folder but not there. Anyone know where I can find it to re-install it in dock?
Thanks

Go to Apple Mac OS X with Safari and drag the icon next to "http" from the address to the right side of the dock.

SMB 3.0 and Apple mac (osx)

Hello!
Im thinking about mac and SMB 3.0 today i tested a mac and smb 3,0 and unplug the ethernet cable and the plugged it in again and it wont restart the file transfer
can you help?

Hello!
Im thinking about mac and SMB 3.0 today i tested a mac and smb 3,0 and unplug the ethernet cable and the plugged it in again and it wont restart the file transfer
can you help?
You need to have multiple physical uplinks and configured SMB Multichannel to have transparent failover, fault tolerance and redundancy. See:
SMB Multichannel
http://blogs.technet.com/b/josebda/archive/2012/06/28/the-basics-of-smb-multichannel-a-feature-of-windows-server-2012-and-smb-3-0.aspx
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

SCSI and Mac OSX don't scan

Hello,
Just installed my old Agfa Studioscan IIs with an old but perfectly OSX supported Adaptec scsi card working OK with Silverfast scanningdrivers.
In the old days I scanned the scsi ports and I could mount a new device. Now I have to restart the Mac(sometimes more than once) to let the OS find my scsi scanner. Is somebody aware of existing software that scans and implements a scsi device in nowadays OS 10.4 without restarting?
Friendly,
Marc

found out I had to buy the silverfast soft

Installing Oracle9i Database Release 2 Enterprise Edition for Apple Mac OSX

I successfully downloaded the file from the website, however I am not sure how to begin installation. What folder/file am I looking for to begin installation. There is an install folder but it is empty. Any help would be appreciated.
Martin

If you look at page 2, Installation and Configuration, the steps to configure you OS and "install" oracle are detailed. Since this a developer preview version the standard installation steps commonly associated with Oracle do not apply.

Creative Zen Touch & Mac OSx comput

Hi, I have been given a Apple Mac OSx powerbook laptop.
I have downloaded my Creative Media Source onto my work computer (normal PC), but I tried to put the same disk into my laptop last night and it did not work. Is Creative compatable with Apple Mac? Does anyone know if i can buy a disk?
thanks,
Megan.

Hi Megan-
As far as I can tell the Zen Touch is not compatible with OS X right out of the box. At least I couldn't get mine to work on one.
But my Zen Nano Plus works in OS X.
If it's a new Mac you may have to look into installing Bootcamp and loading Windows XP on it to get it to work.

Adobe reader 11 takes over application folder icon in Mac OSX 10.8.2

After installation of the adobe reader 11 on Apple Mac OSX 10.8.2 the reader icon replaces the standard Apple application folder icon. It is very annoying. The reader works more or less ok.
I see in the adobe reader forum search that similar errors happen in windows 7 for years now and this behavior on Mac follows the pattern of lack of basic testing of the application before releasing it to the public.
-Peter

Disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.
* https://support.mozilla.org/kb/pdf-files-are-blank-and-cant-be-downloaded-mac
* https://support.mozilla.org/kb/Opening+PDF+files+within+Firefox

Cannot print pdf using Mac OSX 10.9.3 and Reader XI 11.0.07

Please advise how to get Apple Mac OSX 10.9.3 withAdobe Reader XI 11.0.07 to print pdf. Able to open the pdf but on selecting print simply comes up with an Adobe red box saying "Cannot print pdf". I believe this is a common problem so expect Adobe have an answer.

Have had same problem with error message "Unable to convert postscript file". No response from Adobe. Even tried their technical support which said they offered no support for free products. Have found a couple go arounds but no fixes.

I'm using mac OSX 10.9.5 to write to NAS, I need to decrease the SMB max MTU size used by the OSX

I'm using mac OSX 10.9.5 to write to NAS, I need to decrease the SMB max MTU size used by the OSX

By default, OS X Mavericks 10.9.5 Network MTU is set to 1500. If you perform the following at your SMB server, with an MTU of 1500, you will likely receive Message too long, and the SMB share takes a very long while to mount. This might be the contributing factor that has you believe it is an SMB MTU configuration issue.
ping -c 1 -D -s 1500 smbserver
If you dial the Network MTU down in a custom setting, the ping is immediate, and the SMB share mounts briskly. I tried values in small decrements until the message too long ceased.
ping -c 1 -D -s 1472 smbserver
I have done some searching and I do not see how, in Apple's current SMB implementation, that one can configure /etc/nsmb.conf to reduce SMB MTU size. See man nsmb.conf.
More on this subject.

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

How do I bundle a jre with an RCP appl on Mac OSX

Hi,
We are making an RCP appl with kepler.
I want to ship the jre's with the appl.
On windows I can just ship a jre dir in the root, no problem.
On the Mac (10.8.4) it does not seem to work, at least not in an obvious way.
I downloaded the latest 1.7 jre (25) for Mac from the oracle website.
I tried the following:
unzip it and put it in a jre dir in the root => not used, falling back to system jre
same and put '-vm' in the ini => error saying 1.6.0_51 is not supported (huh? I do not even have 1.6)
I tried exporting an appl (with bundled jre) from eclipse using the product definition. That works but when I look at the generated appl tree I see a jre dir with another jre dir inside it ??? The inner jre dir seems to be a (partial) duplicate of the outer one.
Ok, sort of at least, now I tried to copy my downloaded jre dir inside itself. That works, but if I remove the contents of one of them it does not work anymore and I do not really want to ship a double jre.
Can anybody shed some light here?
What is the optimal way to bundle a jre with an RCP application on Mac OSX?
Thanks,
Tom

I have done this within our product and have it working. It's tricky because if you're using Maven to build, OS X's JRE symlink's libjvm.dylib - which Java's unzip invariably screws up.
I was only able to get this to work by using Tycho, as the app export within the PDE is just plain broken (and seemingly unmaintained). This bug has been there for quite some time - I don't have any faith in it ever getting fixed, regardless of whatever bugzilla says.
If you're building RCP apps for distribution - you should probably consider using Tycho anyways; admittedly there's a lot of BS that comes with it, but it's the only seemingly straightforward way to build and package an RCP app in a headless manner for continuous integration. Buckminster is supposedly also a solution - but it has less information and support than Tycho - so YMMV.
Anyways back to your problem. Using Tycho with some custom maven magic, I was able to solve this. Essentially I downloaded the JRE from Oracle, and uploaded to our Artifactory so I could reference it using maven coordinates. I unpack that tar.gz package into the OS X distribution directory and place the package under the <your app name>.app/jre. Because of the symlink munging - you have to go and fix that, so remove the existing zero byte libjvm.dylib and relink it using ant exec. Now that you have a good JVM, you need to modify the config.ini to use the right JRE. Unfortunately you can only build this on OS X or Linux - Windows is SOL unless you can find a way to use Cygwin or equivalent. Since I'm doing this outside of Tycho's archiving phase (and theres not apparently way to slip my changes in between), I have to recreate the OS X archive.
Hopefully this helps you solve your problem... I beat my head against the wall trying to fix this for several weeks trying to find a working solution as the error reporting is completely incorrect.
Anyways, good luck!
<profiles>
<profile>
<id>fix-jre-archives</id>
<activation>
<os><family>unix</family></os>
</activation>
<dependencies>
<dependency>
<groupId>com.sri</groupId>
<artifactId>oracle-jre</artifactId>
<version>${distrib.oracle-jre.version}</version>
<classifier>macosx-x64</classifier>
<type>tar.gz</type>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<version>2.8</version>
<executions>
<execution>
<id>unpack-mac-jre</id>
<phase>prepare-package</phase>
<goals>
<goal>unpack</goal>
</goals>
<configuration>
<artifactItems>
<artifactItem>
<groupId>com.sri</groupId>
<artifactId>oracle-jre</artifactId>
<version>${distrib.oracle-jre.version}</version>
<classifier>macosx-x64</classifier>
<type>tar.gz</type>
<outputDirectory>${distrib.macosx.x86_64}</outputDirectory>
</artifactItem>
</artifactItems>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>1.7</version>
<executions>
<execution>
<id>fix-jre-mac</id>
<phase>package</phase>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<mkdir dir="${distrib.macosx.x86_64}/${distrib.bin.name}.app"/>
<move file="${distrib.macosx.x86_64}/jre${distrib.jre.version}.jre" tofile="${distrib.macosx.x86_64}/${distrib.bin.name}.app/jre"/>
<symlink action="delete" link="${distrib.macosx.x86_64}/${distrib.bin.name}.app/jre/Contents/MacOS/libjli.dylib" />
<symlink link="${distrib.macosx.x86_64}/${distrib.bin.name}.app/jre/Contents/MacOS/libjli.dylib"
resource="../Home/lib/jli/libjli.dylib" overwrite="true"/>
<concat destfile="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}_temp.ini" fixlastline="yes">
<header filtering="no" trimleading="yes">
-vm
../../jre/Contents/Home/lib/server/libjvm.dylib
</header>
<fileset file="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}.ini"/>
</concat>
<move file="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}.ini"
tofile="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}_bak.ini" />
<move file="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}_temp.ini"
tofile="${distrib.macosx.x86_64}/${distrib.bin.name}.app/Contents/MacOS/${distrib.bin.name}.ini" />
</target>
</configuration>
</execution>
<execution>
<id>remove-director-archive-mac</id>
<phase>pre-integration-test</phase>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<delete file="${archive.macosx.x86_64}" />
</target>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.3.1</version>
<executions>
<execution>
<id>manual-archive-mac</id>
<phase>pre-integration-test</phase>
<goals>
<goal>exec</goal>
</goals>
<configuration>
<executable>zip</executable>
<workingDirectory>${distrib.macosx.x86_64}/..</workingDirectory>
<arguments>
<argument>-r</argument>
<argument>-q</argument>
<argument>-dd</argument>
<argument>--symlinks</argument>
<argument>${archive.macosx.x86_64}</argument>
<argument>${distrib.root}</argument>
</arguments>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</profile>
</profiles>

The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my email. I can't seem to purchase this on-line

The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my emails. I can't seem to purchase this on-line as it keeps telling me to go to the app store. I haven't got the app store on my computer as I am told I need iCloud for which I need the new operating system, which I can't download or purchase as I am sent back to an instruction telling mee to go to the app store icon.
How difficult can it be to simply purchase the software on-line have it shipped to you so you can install it, in the event it cannot be downloaded as it appears it can't be based on my curent operating systems being Mac OSX 10.5.8.

Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
Requirements for Mountain Lion:
http://www.apple.com/osx/specs/

Apple Mac OSX 10.7 scan to smb?

Similar Messages

Maybe you are looking for