Apple Macbook Shell

I own an original macbook, and i heard that apple replaces the inside of the shell for free if you have the warranty.
But i have a problem with the outside.
Within the first week I purchased it, I noticed there was a little crack right on the tip of the apple logo, so i took it to the apple store, and the guy told me it was just a scratch and not to worry about it. So I didn't and now it is obvious that it is a crack because it keeps getting bigger every month. I want to know if they replace this.
I take really good care with my apple products, and I barley let anyone use my apple stuff.
Thanks for anyone who can help!
Other info:
It had a hard drive problem within the 2 month of the purchase and they replaced it because they said it was dead, and i lost all my school notes and reports.
It over heats, burns my lap during class, and then after it finally gets way to hot the fans turn on and stay on for a long time. My friends macbook's don't do that.
I have an apple protection plan for the macbook

Hi
Regarding the crack, did you document what the tech said and have proof of that?
As for the hard drive and the burning of the lap, take it in. Usually I advise to run tests etc but in your case just bring it back with your Applecare agreement. They may end up just replacing it.
Oh, and backup all your info before you take it back.
Message was edited by: musashi88

Similar Messages

  • [SOLVED, mostly] Arch on Apple MacBook Pro 15-inch with Retina Display

    I've been looking into the Apple MacBook Pro. Of course, I would want to get rid of Mac OS X and load up Arch. Please tell me if the following will work out-of-the-box or have workarounds:
    WiFi
    Ethernet
    Sound
    Touchpad
    Keyboard
    Charging
    Bluetooth
    Graphics Card
    Webcam
    Microphones
    USB 3.0 Ports
    HDMI Port
    SDX Card Reader
    I know the high DPI display shouldn't be a problem since GNOME Shell now supports those, but I want to be able to use all of the above things. Also, please let me know if there are any other problems to look out for. Thanks.
    Last edited by JohnSmithLinux (2013-12-02 01:50:36)

    I can't comment on your specific model, but IMHO, getting a Mac (especially a Mac laptop) to run Linux exclusively doesn't make much sense, for the following reasons:
    Apple's EFI implementation is weird, and some features (most notably the ability to upgrade the firmware) can be done only with the help of OS X. As a practical matter, this means that you'll either have to use exotic tools like the Linux version of "bless" or boot the computer in BIOS/CSM/legacy mode -- and even then, upgrading the firmware will be a hassle, should that become necessary. Booting in BIOS/CSM/legacy mode is the easier path, and there's nothing wrong with doing it that way, but as the industry is moving away from BIOS and toward EFI, it means that either you'll be going in the other direction or you'll need to struggle with a Linux-only EFI-mode installation on the Mac.
    Hardware support in Linux for Macs is a bit weird, in part because of the preceding issue (the weird Apple firmware). I realize your question is aimed at uncovering specific answers about this topic, but as a general rule, Apple hardware seems more trouble-prone under Linux than standard PC hardware. Also, note that hardware support can vary depending on the mode you use (BIOS/CSM/legacy vs. EFI). Video hardware can be particularly troublesome on some models, with BIOS/CSM/legacy sometimes working better.
    Mac mice (including laptop trackpads) are 1-button devices, but Linux works best with 3-button mice. A 2-button mouse can do in a pinch. Using a 1-button mouse with X requires applying unusual workarounds involving the use of keyboard keys while clicking the mouse button. Although this can be done, it's an extra hassle, both to set up and to use. On a desktop computer, of course, you can just replace the mouse, but this isn't always practical with a laptop.
    I haven't checked pricing recently, but Apple hardware tends to carry a price premium compared to similar hardware from other manufacturers.
    Although most of these issues (with the possible exception of price, if you're on a tight budget) aren't really critical by themselves, they combine to create a rather unpleasant combination, at least when considering a Mac exclusively as a platform for running Linux. If you wanted to dual-boot with OS X, things would be different, of course, but personally, I wouldn't buy a Mac as a Linux-only computer.
    If you've got specific reasons for wanting a Mac, perhaps you could post them here. Although I personally haven't shopped for a laptop for a while and so can't offer specific suggestions, somebody else might be able to suggest alternatives that would do what you want.

  • I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

    I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
    Other info is available:
    Superdrive MFG date: Sept 2009
    Model: DVR-118LBK DVD-R/RW Writer Unit
    My Macbook is: Mid-2010, running Mavericks
    Thanks in advance, God bless!

    That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5.  For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity.  Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay.  Here's an example of one, although it only features USB connectivity.  You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial.  Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting.  If this isn't important to you, then a USB-only enclosure would be adequate.  The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • How to connect an MTN usb rotator to an Apple MacBook Pro 13'3

    How do i go about connecting my Apple MacBook Pro 13'3 to the interent with an "Huawei Mobile Broadband E367 HSPA+ USB ROTATOR" on the MTN Network

    If your USB port is working now, you didn't damage it and have nothing to worry about.
    The behavior you saw in your bus-powered Fujitsu drive is normal for a drive that needs more power than the USB port can provide.
    If your USB ports ever do shut down, resetting the SMC may bring them back online again quickly and easily.

  • I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?, I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?

    I need to buy a logic board for 
    Apple MacBook Pro 15" A1286, but i couldn´t find online to buy it where can i get one and if it´s possible if i can have it delivered to my hotel

    There are a lot of MacBook Pros with the model # A1286 - which year is your model (e.g., "15-inch Late 2011")?
    The only place that I know that you might could score a specific logic board is www.ifixit.com. They may be able to ship to your hotel.
    Clinton

  • How Does One Perform Initial Installation of T5 S/W on an Intel-based Apple MacBook Pro?

    Hello People,
    My old Palm Tungsten T5 died suddenly. I managed to secure an open box T5 from Amazon, and I tried to install on my new Apple MacBook Pro. The Palm software did not complete the install apparently due to the lack of a PowerPC processor. Now my new T5 cannot even read my 2GB SD card.
    Is there a work-around for installations using Intel processors on Apple computers?
    I am running OS X Lion---not Snow Leopard. I just bought this MacBook Pro less than two months ago, and it's the most modern version.
    I saw something of the issues others were having with Snow Leopard, and I wondered whether the same issues carried over to Lion.
    If necessary, I can dig my old Windows Vista PC out of storage, but I really like using the Apple laptop and would prefer to use that since I normally use the laptop and PDA on the go.
    Most respectfully yours,
    John
    Post relates to: Tungsten T5

    Here is the info. on MAC OS X. You will need to look for 3rd party options.
    Palm Desktop and HotSync Manager are not compatible with Mac OS X 10.6 Snow Leopard. Palm currently has no plans to release future versions of Palm Desktop and HotSync Manager for Palm OS. Customers do have options with third-party solutions such as The Missing Sync for Palm OS from Mark/Space.
    Here is the link to Mark/Space for your T5.
    http://www.markspace.com/products/palm/palm-sync-software.html?source=picker_palmos_mac
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/common/article/47831_en.html#tungstent5
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • HT3819 I have a new apple MacBook Pro. All my music is on my old computer and on my I-Pod. Can I use home sharing to transfer my music onto my new computer?

    I have a new apple MacBook Pro. All my music is on my old computer and my i-pad. What is the easiest way to transfer my music onto my new
    computer?

    apps
    If you have an iPod touch or iPhone with iOS 4 or later software, or an iPad, you can use iTunes to transfer files between your computer and an app on your device that supports file sharing.
    You might want to do this if, for example, you want to save files you create on your device to your computer, or take files with you so you can use them when you’re away from your computer.
    You don’t need to sync your device to transfer files, but your device needs to be connected to your computer.
    For information about supported apps, see the documentation for your apps.
    Hide
    To transfer files from your iPod touch, iPhone, or iPad to your computer:
    Connect your iPod touch, iPhone, or iPad to your computer.
    In iTunes, select your device (below Devices), and click the Apps button.
    Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.
    From the list on the right, select the file you want to transfer, and click “Save to.”
    In the window that appears, select the destination where you want to save the file, and click Choose.
    The file is saved to the selected destination on your computer.
    SImport music and video already on your computer
    If you have audio or video files on your computer, you can import them into iTunes so that they appear in your iTunes library.
    Hide
    Here are ways to add items from your computer to your iTunes library:
    Drag a file or folder from the Finder to the iTunes window.
    If you add a folder, all the files it contains are added to your library.
    In iTunes, choose File > “Add to Library,” locate a file or folder, and then click Choose.
    By default, iTunes places a copy of each audio file in the iTunes folder (Home/Music); the original file remains in the current location. For information about adding an alias to the file (instead of creating a copy), see Add items to your library without copying them to your iTunes folder.

  • My Apple Macbook Pro is connected by Telstra wireless Broadband to the Internet. Is it possible to connect to a WiFi Printer using Air Express or some other system? to the Internet.

    Hi
    Can someone please advise if it is possible to connect my Apple MacBook Pro 13.3" to a WiFi Printer, as I am connected to the Internet through Telstra Wireless broadband.
    Is it possible by using Airport Express or some other way?
    Thanks

    1.Power Cycle
       Power off the router. Unplug it from the wall. Wait a while.
       Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
       It will take a while.
      Restart the computer.
      Start up in Safe Mode.
       http://support.apple.com/kb/PH11212?viewlocale=en_US
    2.  Turn off Extensions, if any.
         Safari > Preferences > Extensions
    3. Turn off proxies, if selected.
         System Preference > Network > Advanced  > Proxies Tab
         Under "Select Protocol", uncheck any box if selected.
         Click "OK" then  "Apply"
    4. Uninstall anti-virus software, if any.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

  • Is my apple MacBook Pro laptop compatible with the new Creative Suite 6 program??

    I own a Apple MacBook Pro laptop i currently have the operating system Mac OS X Lion 10.7.5.
    my laptop is 13 inch laptop not a 15 inch.
    Here is the following info about my apple computer below:
    Processor  2.5 GHz Intel Core i5
    Memory  4 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000 384 MB
    Software  Mac OS X Lion 10.7.5 (11G63)
    I want to make sure that the new Creative Suite 6 program is compatiable with my apple
    computer before i buy it. my mother last year had brought me the creative suite 5 program
    for my Dell Desktop computer however, this computer later on crashed and now i am stuck with
    the CS5 program my mother brought because, this version of this program she brought is
    only for a desktop computer that has a windows operating system not for a apple
    computer that has a mac operating system. At the time my mother nor i knew if, i
    would be getting a new apple computer plus, i needed the program for school so that i
    could work on homework assignments at home. Now i am currently stuck with the
    windows version of the CS5 program which i cannot use at all. I tried to install it onto
    my apple laptop many times before but, i only ended up getting a error message saying
    that the software I had wouldn't install to the computer for some reason unexplained.
    Message was edited by: mzpretty3

    Hi mzpretty3
    Please See the Minimum System requirements for CS6 : http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html

  • Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Some basic printer troubleshooting steps before worrying about a printer driver:
    1. Have you tried turning the printer off and back on?
    2A. Is the printer attached with a cable?
         If yes, have you tried unplugging and re-plugging both ends of the printer cable?
         If that does not help, can you test the printer with another cable?
    2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
         Have you tried restarting your wireless router?
    3. Have you tried restarting your MacBook? (Be sure to save your work first.)
    4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
    5. Have you updated OS X or the program you're trying to print from recently?

  • Apple MacBook Pro 13" 2012 with OS Mountain Lion ships standard with iWorks?

    We recently purchased an Apple MacBook Pro 13" new, but from a recommended third party seller because we needed the 2012 version with OS Mountain Lion on it due to Pro Tools incapatability with Maverick.  Our Apple consultant told us that all Laptops ship standard with iWorks, but our college student who we purchased it for, says it is not on the laptop & that no software was included except what was already installed on the laptop.   Is this typical now with Apple, that you have to go & download your own software from the ITunes App store?  And is there a purchaser's code or something showing that there is no additional charge for the software?  Please help!  These laptops are expensive & should come with the typical Apple tools & software!  Also missing iPhoto, is this the same condition or did the seller rip us off?

    Just a caution when reading this forum for ML information ...
    Over 3 million have downloaded ML.  Count the number of "complaints and b*tching" like some in this thread, and you will find the number in the thousands.  Simple math will tell you how many users have enough of an issue, real or imagined, to actually say so.  Most users who are happy are too busy just using it to say anything.
    Now, as a reminder, you can download ML and load it on an external drive.  That way you can play with it to see what issues *you* may have based on your specific uses.  Of course external drives will respond more slowly than internal drives, but you should know if certain applications do not open.
    Also, check this site for applications that simply do not work under ML as "research": http://roaringapps.com/apps:table

  • I have an Apple Macbook and will be backing up the entire system to an external hard drive utilizing the Time Machine application. when I am doing this, will the data on the external drive that I am using be erased?

    I have an Apple Macbook and will be backing up the entire system in order to upgrade to a newer OS. I will be using an external hard drive to do this and there is already data on it. To complete the backup, i will be using the Time Machine application. Does this application wipe out all of the existing data on the external hard drive, or will it create a new "folder" for the backup?
    thank you

    No, but as steve359 states you should use a dedicated hard drive for backups. It you need a temporary backup then you can use the drive provided it has sufficient space for all your data on the hard drive.
    When Time Machine finds that the drive has data on it already it may decide to erase the drive before continuing, which is another reason to use a dedicated drive.

  • I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

    I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

Maybe you are looking for