Apple Magic Mouse Disconnecting

My Magic Mouse, that i brought for my Mac Mini, every 30 secs or so it disconnects, then about 1 min later it will reconnect again? that this is ongoing every 30 secs providing that im using it. If i leave it alone it will stay connected no problem, but the moment i touch it, it disconnects.
Anyone any ideas or do i just fire it out the window!!!

I have a 15" MBP Retina display from 2012, Lion 10.7.5, running lid closed with bluetooth mouse and keyboard.  My desk configuration has not changed but in the last couple of weeks I get both devices disconnecting simultaneously, once or twice per day.  The dashed bar disappears from the Bluetooth icon in the menu bar.
I turn bluetooth off and on (lift the lid, using keypad), and then it all works again.  I don't need to even touch the mouse or keyboard they instantly reconnect.  It is not the magic mouse battery problem, I've suffered through that and have it licked, and that would only take out the mouse.  There's nothing obvious in the system logs.  No change I know of in nearby electrical appliances or WiFi configuration.

Similar Messages

  • Apple Magic Mouse best usage

    Hi guys!...
    My wife bought me an Apple Magic Mouse and i have a few questions.
    I have a Mac Mini under 10.6.4 by the way
    I normally left downloading some stuff on my Mac all night long. Is it best to leave the Magic Mouse on or off?... If i turn it off... How can i connect again without reconnecting a USB mouse?... If i turn the mouse off without disconnecting it from the bluetooth icon, is there a risk on hardware damage?
    Thanks so much!!!

    The mouse should turn off automatically. You can just press the power button and hold it until a message appears on the Mac saying "Connection Lost" or "Trackpad Off". It does not damage the hardware.
    Hope that helps.

  • Magic mouse disconnect after a minute

    My Magic Mouse disconnect just in a minute after starting the system.
    As per instruction I got, I have deleted the Bluetooth Preferences, deleted the mouse from bluetooth list and re added it, but the problem is still present, Mu mouse battery is full [more than 90%] and no any physical damage happned with my mouse.
    The problem started when I put my I Mac in sleep mode for few Hours.
    Please provide me the solution
    Thanks

    I think you have the same problem as we have:
    https://discussions.apple.com/message/19269136#19269136

  • Can anyone tell me why my apple magic mouse isn't working on my computer i've tried new batterys but it still doesn't work

    I bought a macbook pro and apple magic mouse 6 months ago and it has worked in the past, but when I tried to use it earlier it doesn't work. The macbook seems to recognise it but when you move the mouse the curser stays put. The track pad still works though, any sugestions?

    I bought a macbook pro and apple magic mouse 6 months ago and it has worked in the past, but when I tried to use it earlier it doesn't work. The macbook seems to recognise it but when you move the mouse the curser stays put. The track pad still works though, any sugestions?

  • Can I change the name associated with my Apple magic Mouse?

    How do I change the name associated with or the name of my Apple Magic Mouse?

    setting then mouse then set up blue tooth mouse then control click on the mouse name

  • Using Apple Magic Mouse With Windows 7 64 bit and Parallels Desktop 8 questions

    I will be getting an iMac in the coming months and installing Parallels Desktop 8 and Windows 7 64 bit.
    I was wondering if I would have the functions of been able to left click, right click, scroll (preferably vertically but also occasionally horizontally) with the Apple Magic Mouse when I'm running Windows 7 through Parallels Desktop 8?
    I just wondered if anyone has installed Parallels Desktop 8 and Windows 7 and have you been able to do what i mentioned above and also have you come across any other issues, problems whilst using the Apple Magic Mouse on the Windows side?
    If there is any problems/issues with doing the above, is there anything I will need to do to get the above functionality to work?
    Thanks in advance.

    stz-42 wrote:
    I'm using Parallels 8 Win 7 64 bit, on an iMac.
    - leftclick and rightclick is working
    - i miss the middle button in my cad-software
    The same with the trackpad!
    Sometimes scrolling is a bit too fast, becuase Win 7 isn't made to use with the Magicmouse or trackpad.
    The only thing i miss / doesn't work ist the middle mouse button!
    Thanks very much for the help stz-42 its much appreciated.
    Providing I can left click, right click, scroll, then that's OK for me as I will be spending the vast amount of my time on the Mac side.
    Are you able to scroll both horizontally and vertically when using Parallels 8 Win 7 64 bit on your iMac?

  • How to Setup Apple Magic Mouse in Windows 7?

    Hi,
    I have a MBP that runs "Apple OS X 10.6.3" and "Windows 7 Ultimate".
    I also purchased an "Apple Magic Mouse".
    I have no problem setting up the Apple Magic Mouse on the Mac side, but don't know how to set up the Apple Magic Mouse in the Windows 7.
    So how do I make my Apple Magic Mouse work in the Windows 7?
    Thanks.

    Hi,
    I clicked "Add wireless devices", but it cannot show apple magic mouse.
    i put my apple magic mouse for a while and let bluetooth search, the apple magic mouse can be used, but still not showing in the panel.
    if i have to wait for 1 or 2 mins for the mbp to recognize my apple magic mouse,(in the windwos 7 of course), then it's too tedious.
    anyway that can solve this problem?
    Thansk

  • Will the Apple Magic Mouse work with my Mac Mini?

    Hi
    I have a mid 2007 Mac mini — the Model 2,1 — running Mac OS X Snow Leopard, 10•6•8
    I’m thinking of treating myself to the Apple Magic Mouse, or Trackpad.
    Will the Magic Mouse, work with this model and version of the OS … ?
    (I’m ALSO told I need to have Wireless Mouse Software Update 1.0: how do I go about checking that I do … ?)

    I'm not sure about the 2007 mini, but a quick check is to open your system preferences and look for Bluetooth preferences.  If there aren't any, then no magic mouse for you...

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • Can i connect my apple magic mouse and my apple wireless keybord with my pc?

    can i connect my apple magic mouse and my apple wireless keybord with my pc?

    try it find out

  • HT204387 Is there anyway to connect Apple Magic Mouse to my iPad 2

    Is there anyway to connect my Apple Magic Mouse to my iPad 2

    Duct tape, super glue, gaffer's tape-any tape really.

  • I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal

    I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal size

    Got confused between your header question about a wired mouse and the main question about a wireless mouse.  You said your magic mouse was frozen and added you do not have a wireless mouse.   Problem is ... the magic mouse is wireless.   The original mighty mouse was the corded version.
    The wired mouse is a regular problem.  After two to three years it tends to clog up. You can clean it (to a degree) as follows.
    Using an alcohol moistened, not wet, cotton bud, scratch at the mouse ball for a minute or so.   Then turn it upside down and on a clean piece of thick white paper or card on a firm surface, vigorously rub the mouse ball on the paper in a regular figure of eight.  Do this for a minute or so and occasionally tap the mouse on the paper.   This will help dislodge bits of fluff etc.   Then try again

  • Apple magic mouse

    I have just purchased the new Apple magic mouse.My operating system is Tiger version 10.4.1
    The booklet with the mouse says you need to have an Apple version of 10.5.8 or later and to install the wireless mouse software update.
    Has any one installed this new mouse on a G5 computer with Tiger OS.

    Hi Northwich boy, and a warm welcome to the forums!
    If that's 10.4.11 you have, then it'll only work like a regular Mouse as I understand it.

  • Apple Magic Mouse and Headset

    As soonas i run my Apple Magic Mouse together wit my samsung hm3100 my mouse is loosing the connection as soon as i switch of muy head set everything is fine Macbook Pro 17 inch snow 10.6.8
    Any idea
    Thanx
    Frank

    Sorry to ressurect a semi-dead thread, but I'm having issues with this as well.  Using my bluetooth headset and bluetooth mouse causes pandora to speed up and slow down all the time (really weird sounding) and then intermittant drops.  I'm on a 2011 macbook pro with 16gb of ram and a 500gb ssd, 2.3ghz i7 etc etc.  I don't really think I'm doing something that outside of the box, i mean I get that there are limits to how much data can be pushed through bluetooth, but you'd think that would be within reach...  Can you prioritize the data such that the sound quality is never affected?  I'd rather my mouse be a bit jumpy than the sound be all funky...

  • Apple Magic Mouse and ID

    I've recently purchased the lovely Apple Magic Mouse and am finding it quite difficult to use with InDesign CS4 - other ID versions would be the same I imagine. With this mouse you scroll by stroking its top surface, rather like a trackpad. This is excellent in other applications but in ID, because the pasteboard area is so large and the sensitivity of the mouse so high (even when scrolling is turned down to the minimum in its preferences), it's very easy to make your document shoot sideways off the screen. I expect Illustrator would have similar problems.
    Is there a way in which the ID pasteboard can be resized or constrained? Maybe someone will come up with a prefs panel to control the new mouse's scrolling more precisely - but not yet.
    Thanks for any ideas.
    John Mallinson

    I agree, it's far too sensitive. The core problem is that we have become so accustomed to resting our fingers on the surface of mice, because they always require a *definite* press, or scroll action. Now the magic mouse is so sensitive to ANY touch that it reacts to touches meant to push the mouse or were not meant to contact the surface of the mouse.
    At first I liked it a bit, but the more I use it, I think it's Apple's worst mouse ever. Puck included (at least you could buy a housing to put them in). This mouse doesn't "seem" to track the same as all other wired mice I've ever used. The touch interface is great for vertical scrolling, but as pointed out here, far to sensitive in circumstances where such scrolling is not desired. Perhaps this could be rectified with a *very* comprehensive preference panel, ie one that lets a user specify the amount of scroll or movement required to initiate a swipe/scroll. The Wacom tablet panel has such prefs, for each program and an overall control as well (ie all unspecified apps). My other major complaint against the mouse is the overall shape. It is simple not comfortable or natural. I prefer a more bulbous mouse, since like many of you I imagine, I end up using the back of my palm to "push" the mouse around or rest my fingers on it. The Magic doesn't lend to resting on it at all. I also need to lift it up, or scroll it farther to the side of the screen than the room I have on my mouse surface. With my Mighty Mouse I pick it up by the sides and put it back down somwhere in the center of my mouse area. I have a dual screen setup, and my coworkers all have 24" iMacs, so it can still be a lot of screen space to traverse.
    My Magic Mouse was a gift, but I still feel the $70 for it was a waste. I use it primarily because the scroll ball on the Mighty gets dirty fast and does not respond, and at that I rest the Magic next to my keyboard to scroll but still use the Mighty 95% of the time. If Apple would have made the exact same Mighty Mouse but only made the center area where the ball is, a touch sensitive surface, I would be in mouse heaven (they could delineate the area with a small inscribed line or something).
    IMHO big Apple Fail.
    Chris
    aka SuperMacGuy

Maybe you are looking for

  • Exclusion mask in file sender

    Hi Frnds, i have 3 interfaces separately in my environment. 3 interfaces have 3 sender file channels.All 3 channels need to pick the file from same dropzone(abc/xyz/).But file names will differs. Lets asssume 1st channel will pick the file name start

  • How to erase photos in my iPad synchronized from my pc ?

    how to erase photos in my iPad synchronized from my pc ?

  • BR tools

    Can anyone plz send me the complete notes on BR tools Thanks in Advance Ansar

  • What happens with sound? in Flash CS4 AS3

    Hi, I have a couple of questions on the same topic: I was wondering what exactly is happening when I have this code: var sound:Sound = new Sound(new URLRequest("URL.mp3"); does the mp3 file get downloaded?      -If yes           -where does it get do

  • ICal on mac not getting iCloud data

    Hi, I'm having trouble with iCal on my macbook air syncing with iCloud. When i add an event to iCal on my macbook it syncs with icloud.com and the calender on my iphone perfectly. However, if i add an event on icloud.com or the Calendar on my iphone