Apple Magic Trackpad freeze after three finger touch

Hi at all!
I have the Apple Magic Trackpad and i wanted to use it with Arch. I installed the synaptics driver and the trackpad has the basic functionality like tap, scroll with two finger and second click with two-finger tap, however if a put three finger on it the trackpad freeze for like 10 seconds and then I'm able to continue using it. Now I don't even know where to start   looking for the problem... Someone know how to help me??

Hi! I have the same problem. Problem solved? Logs are clean. Works only on pressing touch, but only as a one-touch.
Last edited by lybin (2013-01-24 10:11:30)

Similar Messages

  • Magic Trackpad freezes after batteries changed

    The past few times my Magic Trackpad batteries have needed replacing, it loses its bluetooth connection and cannot be found.  The only way I can get things going again is to shut down my iMac with the power button and restart.  I believe this has only been an issue since I installed Lion.  Any ideas on how to fix this annoying behavior?  I'm using Apple's rechargeable batteries.

    Yes!  I did that and then removed and replaced my Trackpad batteries and here I am again, with everything working.  I may even notice a few other positive changes.

  • Magic Trackpad freezing after startup

    I recently got a Magic Trackpad for my MacPro. Installation went well. But when I restarted, the only thing functioning with the trackpad is the cursor. The double click etc. all gone.
    I again restarted and all's back to normal.
    This happens everytime I open the MacPro. 1st boot the trackpad is not functioning, then when restarted, all will be back to normal.
    Need some help here. Thanks so much.

    Maybe someone in our brand new Magic Mouse and Trackpad forum can help.
    DALE

  • Keyboard and trackpad freeze after being idle for a few minutes

    I have a early 2008 MBP and just today the keyboard and trackpad freeze after not using it for a few minutes.  I was at work when it happened.  I plugged it in and started doing something else and a few minutes later came back and i couldn't move the mouse or do anything with the keyboard, but processes were still running.  For example, I have a fan speed app that sits in the toolbar, and it was still showing current fan speed.  So I restarted it, and it did it again.  So the next time it happened, I closed the lid and opened it up and it fixed it.  It's happened several times now after a few minutes of non use and I just close the lid and it fixes it.  Also, there was a period when I was using my computer for a couple of hours non stop and it didn't have a problem.  Only when I'm not touching the keyboard or trackpad does it do it.  since this keeps happening i have verified the disk in disk utility, done a hardware reset with cmd+opt+p+r, ran through system profiler to see if there were any problems with no results, and it still does it.  Anyone have any ideas?
    It should be noted that not only does the battery not work for more than about 2 minutes, the left I/O board appears to be dying.  The power chord takes a considerable amount of wiggling and adjusting before it finds a place where it will actually charge. The audio out and the USB on that side are the same way. So I am aware of that problem. Also, I have had to take out the right side fan multiple times and disassemble and oil the bearing because it's going bad, which requires taking the top plate off, but I haven't had to do that for over 6 months. In my mind if the problem was caused by taking the top plate off, that would fry the entire top plate, which happened once when a technitian at a local company took the computer apart for a waranty repair.  All of these problems considered, I don't think they would have anything to do with the fact that the mouse and keyboard suddenly won't work after about 5-10 minutes of sitting idle. I have done nothing different since yesterday that would explain why it does this. 
    Also, I can't do anything with the install disk because the CD drive is dead.  But that's mostly because it was a piece of garbage to begin with.
    Any Ideas would be helpful.

    After doing some more digging I was watching processes in Activity Monitor to see if I could see what process is failing.  I think the problem with with Chrome. It only happened when Chrome was open. And since then I reinstalled it and the problem has so far gone away.  So, I think the problems is solved. 

  • Can i use an Apple Magic Trackpad on Native windows 8.1

    as title says. im trying to help my stepdad use a brand new Magic Trackpad on his Toshiba laptop, natively 8 and recently updated to 8.1. after all my researching i think its not possible at this time and the closest i came was http://www.labnol.org/software/apple-magic-trackpad-with-windows/14158/ and http://www.trackpadmagic.com/
    i hope im not being blasphemous talkin about using this on this machine. (i hope it wont work and i can use it on my macbook.)
    thanks for any input.
    Spencer.

    No, but you can use the Apple wireless keyboard.

  • Apple Magic Trackpad problem

    I just bought the apple magic trackpad but it gives me only left-click and pointer movement, nothing more.
    Not even two-finger scrolling or right click.
    Any ideas?
    (I am using macbook pro 2010 and lion operating system).
    Thank you.

    I ahev also been having the same trouble. I phoned Apple support and they made a couple of suggestions including re-installing Lion. Nothing worked so I took it back today for a replacement which does not work either.
    It appears that it connecting as a mouse (mouse logo pops up) rather than a Magic Trackpad. Having told the Apple 'Genius' in-store while I was getting the replacement, he told me he had not heard of anyone else having this problem and it must be my hardware. It works fine on an identical system running 10.6.8.
    I dont have USB Overdrive installed on mine. I am using a 24" iMac from 2009, 2.93GHz and 4GB RAM. I cant see any idea why it would not work so any suggestions welcome.
    Thanks,  Kev

  • I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why?

    I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?

    Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
    Barry

  • Can i use Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010

    Can i use new Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010?
    thank
    dean

    Yes. Pair using Bluetooth with your MacBook Air.

  • Magic trackpad freezing

    Ok, very simply put, I have a 2006 Mac Pro running 10.7.5 fully patched as of today.  I also have the Magic Trackpad (A1339) running over bluetooth to control my pointer.
    My issue is this, if I attempt to "Swipe between full-screen apps" left or right with three fingers (or four, depending on configuration under System Preferences), the pointer will freeze for a period of time, up to 10 seconds. This problem is driving me *insane* since I perform multi finger swipes on my 15" Retina Macbook Pro with ease.
    What is it with the Magic Trackpad configuration on my Mac Pro that causes the pointer to freeze?

    Hi guys, I had the same problem. After some trying around, I noticed that, from the Trackpad settings, pushing "Set Up Bluetooth Trackpad" would bring it to life again. I used Finder via the keyboard (Cmd-Space) and started typing "trackpad". Then pressed Tab several times to highlight the "Set Up... button". Pressed Space and voila, it worked again.
    However, the three finger freeze was still there. Turned out that changing the "Tracking Speed" solved the problem completely. Must have been a glimps in the settings or someting... Hope it stays like this.
    Share the experience!
    Gr. ER(ik)

  • Trackpad two- and three-finger functions not working

    Everything was fine last night, but when I turned on the computer this morning, the trackpad is not working correctly. Cursor movement with one finger feels different than normal (a bit sluggish) and two- and three-finger functions such as scrolling, enlarging, and navigating forward and back do not work. I have tried letting the computer sleep first, rebooting, shutting down and turning back on, and the trackpad firmware update from last November (which it said I did not need to update) and nothing has worked. The trackpad menu in the System Preferences offered nothing as well. I have not updated to Snow Leopard.
    Thanks in advance for your help.

    Hi
    I had the same problem specially after carrying out the last update 4.3 the battery was draining very fast y. In addition to that the phone freezing initially for few minutes then for almost a day and finally continuously.
    I did almost every thing but replacing the handset and non worked.
    As a final attempt to fix the problem before I replace the unit and get a new one was to
    1. connect the phone to the my computer (Mac)
    2. Launch iTunes
    3. Restore the phone to factory setting (with the 4.3) upgrade.
    Of course I lost every thing my contacts all of my apps and phone settings. But it worked it has been two days now the phone didn't freeze and the battery life is even better than before.
    Note:
    1. All of my contacts, note, calendar, emails were backed up using my company exchanger
    2. Before restoring I listed all of the apps that were installed and I reinstalled them one by one all over again.
    Try this solution and I hope it works with you.
    Regards
    Ana Al Khanajri
    iPhone 4   iOS 4    

  • HT4254 Magic Trackpad Freezing Again

    Magic Trackpad is freezing frequently again after the latest update to OSX Mavericks. Is there a cure?

    Hi davidaw,
    Thanks for visiting Apple Support Communities.
    If your Magic Trackpad is unresponsive or behaving erratically, I recommend starting with the troubleshooting guide found on this page:
    Trackpad or Magic Trackpad is jumpy or erratic
    It lists several steps that can help isolate and resolve the behavior you're seeing.
    Best Regards,
    Jeremy

  • Apple Magic Trackpad questions

    Hello,
    I bought yesterday a Magic Trackpad from Apple, after reading it was supported in 2.6.37. Pairing it with my Bluetooth USB dongle was quite easy using blueman-applet, and I read on several webpages that 'synaptics' driver was working with the trackpad, so I copied the lines from this post to my xorg.conf:
    Section "InputClass"
    Identifier "Magic Trackpad"
    MatchUSBID "05ac:030e"
    Driver "synaptics"
    Option "SHMConfig" "On"
    EndSection
    The problem I'm facing is that Xorg.0.log show the following suspecting error:
    [ 178.543] (EE) Query no Synaptics: 6003C8
    [ 178.543] (--) Apple Wireless Trackpad: no supported touchpad found
    [ 178.543] (EE) Apple Wireless Trackpad Unable to query/initialize Synaptics hardware.
    [ 178.586] (EE) PreInit failed for input device "Apple Wireless Trackpad"
    [ 178.586] (II) UnloadModule: "synaptics"
    (You can see almost complete Xorg.0.log here)
    However I can use the trackpad with its basic features (moving the cursor around and clicking). I can even change trackpad settings with gsynaptics with no problems at all, and enable advanced features such as tap to click and two finger scrolling.
    I use the the latest version of package xf86-input-synaptics, 1.3.0-2.
    Did anyone have this issue with Magic Trackpad? Am I dong something wrong?

    Unlike you, I'm getting no response from my Magic Trackpad!  Does anyone have any suggestions?  Already added the aforementioned "InputClass" block in my xorg.conf.  I'm using bluez with blueman and everything looks like it's connecting properly.  Blueman-manager successfully detects, pairs, trusts, and SAYS it's connecting to my input service.  Also, the data activity icons are doing their thing (no other bluetooth devices connected to this laptop).  The yellow activity icon even starts blinking when I twiddle my fingers across the trackpad.
    Here's what happens in my Xorg.0.log when I open up blueman-manager:
    [ 50.749] (II) config/udev: Adding input device Apple Wireless Trackpad (/dev/input/event17)
    [ 50.749] (**) Apple Wireless Trackpad: Applying InputClass "evdev touchpad catchall"
    [ 50.749] (**) Apple Wireless Trackpad: Applying InputClass "touchpad catchall"
    [ 50.749] (**) Apple Wireless Trackpad: Applying InputClass "Magic Trackpad"
    [ 50.749] (**) Apple Wireless Trackpad: Applying InputClass "Magic Trackpad"
    [ 50.749] (II) Using input driver 'synaptics' for 'Apple Wireless Trackpad'
    [ 50.749] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 50.749] (**) Apple Wireless Trackpad: always reports core events
    [ 50.749] (**) Option "Device" "/dev/input/event17"
    [ 50.856] (EE) xf86OpenSerial: Cannot open device /dev/input/event17
    No such file or directory.
    [ 50.856] (EE) synaptics: Apple Wireless Trackpad: Synaptics driver unable to open device
    [ 50.856] (EE) PreInit returned 11 for "Apple Wireless Trackpad"
    [ 50.856] (II) UnloadModule: "synaptics"
    [ 50.856] (II) Unloading synaptics
    Let me know if you'd like more information!

  • Magic trackpad freezes

    After installing 10.7.3 when waking from sleep magic trackpad sometimes freezes. If I then I use a mouse the magic trackpad starts working.

    Select  ▹ System Preferences ▹ Bluetooth. Select the device in the list on the left, then from the action menu (gear icon) below the list, select Update Services. Any change?

  • Mouse trackpad freezes after mavericks update

    I have a Macbook Pro Retina and after updating to Mavericks, my mouse curser will freeze on occasion and the only answer is to do a hard reboot.  Very annoying when doing a presentation in front of 100 people!
    I hope there is a bug fix soon!

    I found the following steps will unfreeze the trackpad:
    1. Use Command + Space to launch Spotlight
    2. Type "System Preferences" in Spotlight to open the System Preferences program
    3. Inside of the search field in System Preferences, type "mouse"
    4. Press the "Enter" key to oper the mouse preferences
    At this point, the trackpad will unfreeze.
    If you leave System Preferences open after you've completed the steps above, when the trackpad freezes again, you can use Command + Tab to bring System Preferences to the top of your windows.  Doing so will unfreeze the mouse.
    Very annoying, but better than a reboot if you're presenting in front of people.  I hope Apple fixes this soon.

  • Does the new magic trackpad comes with the Force Touch

    Hi
    I want buy a new magic trackpad and I wonder does it come with the new "Force Touch" that has been recently introduced to a new MacBook? 
    Thanks
    Save13

    According to the article, there is no stand-alone trackpad with that new feature available at this time:
    It makes some sense to imagine Apple will introduce support for Force Touch inside future versions of its $69 Magic Trackpad at some point. It is also likely Force Touch will be rolled out in future iOS devices.
    And, according to the store page, they are still selling the regular trackpad (no mention of a new one):
    http://store.apple.com/us/product/MC380LL/A/magic-trackpad?fnode=b9d707c7e9fd32a ce6fa1d54bdea066635028c206a143a27ea39de2…

Maybe you are looking for

  • Windows 7 Desktop Manager 6.0 will not sync calendar with Outlook

    I just loaded Windows 7 and now I can't get Desktop Manager to recognize Outlook Calendar.  It shows (not installed) next to the Calendar on the sync window. I have uninstalled Desktop software and reloaded and same issue.  I am using a Bold 9700 if

  • (Vendor) Master records with individual payment

    Hi for company code AD12 for all vendors we are using the individual payment because we dont´t have payment advices. And without them the vendors are unable to allocate our payment to open invoices. But the problem is: We post an invoice and a credit

  • Columns doesnt wrap in Excel output

    Hi, I have a Table in RTF template which has 7 fixed width columns. I have couple of description columns in the Table and I have set "Wrap Text" option for those columns so that column width remains the same even for "long" descriptions. This works f

  • How to integrate PPM 5 with Federated Portal Network

    Hi experts, If we are using PPM 5 standalone (without portal) and we want to include it into Federated Portal Network, which steps we have to follow to configurate PPM in the Federated Portal. Do we have to install stack java for PPM 5 at portal leve

  • AQ/MGW Errors

    I posted this on a google oracle forum with no luck , so I will try here ... Can someone please tell me where I can get a complete list of Oracle Message Gateway error messages and thier meanings - The doco is limited and so is metalink. A couple of