Apple Mail 2.1.3 imap issue

I have three Gmail accounts, one of which is a university account. I have them all imap enabled through my Apple Mail. I am unable to access my university account because I am getting a Connection Failed message that says:
There may be a problem with the mail server or network. Check the settings for account [my email account name] or try again.
The server error encountered was: Invalid credentials (Failure)
I can access my other two Gmail accounts in Apple Mail just fine.
Any help is greatly appreciated.
Donovan

I gather your old account is still working perfectly then, so that's something. At least you can send e-mail from that, whilst instructing your contacts to reply to you at your new e-mail address.
When you put 587 into the server port for Comcast, do you also tick SSSL? Try it ticked and unticked.
Try 465 as an alternative to 587 and again, try it with SSL ticked and unticked.
Whatever the Comcast instructions may say, and I am not and have never been a Comcast user, you might also try [email protected] for your outoing server.

Similar Messages

  • Apple Mail vs. Gmail IMAP disagreeing counts

    A friend has two iMacs (10.6.5), iPad & iPhone (iOS 4.2) recently switched to gmail for his primary email service.
    The problem is that not all the devices “see” the same Sent, Drafts and Trash mailbox.
    Working with other IMAP services, I never see issues like this, so I know this is a gmail specific issue - there’s a disconnect between the way Gmail organizes it’s IMAP mailboxes vs. the way the Apple Mail does.
    For instance, when you configure Apple Mail for a gmail IMAP account, it assumes your Sent mailbox will be called “Sent Messages”. And on the gmail web side, a Label always gets created called “Sent Messages”. My experience is that without any intervention, when you send email, it shows up in Apple Mail in the proper “Sent” mailbox, but in gmail it shows up in “Sent Messages”, NOT gmail’s Sent mailbox.
    For some reason, with a gmail account, the old trick of Mailboxes > Use this Mailbox for doesn’t work because the options are grayed out.
    So, how I’ve improved this situation is to open up PropertyListEditor and edit com.apple.mail.plist. There is a key called ‘MailAccounts’ under which is an “item” representing the Gmail account. Underneath, there’s an entry for ‘SentMessagesMailboxName’. I’ve tried changing this to both “Sent Mail” or “[Gmail]/Sent Mail” and both work in the sense that any email sent from Apple Mail ends up in gmail’s Sent mailbox, and NOT in “Sent Messages”
    Here’s where the mystery deepens.
    In my friend’s situation, when I do this, when path is set to [Gmail]/Sent Mail, I see two Sent mailboxes
            in Apple Mail, I see 886 messages in the Sent under ‘Mailboxes’, and 823 in ‘Sent Mail’ under GMAIL section
            in gmail, the ‘Sent Mail’ mailbox has 651 items and there exists a “[Imap]/Sent Mail” mailbox which has 609 items
    When I edit the plist and change the path with PropertyListEditor to just “Sent Mail”, Apple Mail only shows one Sent mailbox with 823 messages items, but is missing the message sent within the past couple days.
    Any ideas how to make sense of this?

    No real answer to your problem, but I can confirm the problem exists...I've been chasing it forever. Another issue (that is equally as perplexing) is that no matter how you configure deleted message behavior in Apple Mail, when you delete a message it NEVER shows up in the Gmail TRASH folder. If someone would just create a definitive guide for using Gmail and Apple Mail they could probably sell it.

  • Apple Mail and GoogleMail via IMAP

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    _*Apple Mail and GoogleMail via IMAP*_
    As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
    As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
    *Activating IMAP for Google Mail*
    If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
    1) Sign in to Gmail.
    2) Click "Settings" at the top of any Gmail page,
    3) click "Forwarding and POP/IMAP",
    4) select "Enable IMAP".
    5) Click "Save Changes".
    *Creating a new account in Apple Mail*
    To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
    1) Incoming Server: imap.gmail.com, port 993 (using SSL)
    2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
    3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
    *Configuring the Google Mail account in Apple Mail*
    After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
    In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
    Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
    So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
    Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
    *Some basic troubleshooting tips*
    1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
    2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
    I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
    The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
    Good computing.
    floba
    (Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    _*Apple Mail and GoogleMail via IMAP*_
    As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
    As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
    *Activating IMAP for Google Mail*
    If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
    1) Sign in to Gmail.
    2) Click "Settings" at the top of any Gmail page,
    3) click "Forwarding and POP/IMAP",
    4) select "Enable IMAP".
    5) Click "Save Changes".
    *Creating a new account in Apple Mail*
    To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
    1) Incoming Server: imap.gmail.com, port 993 (using SSL)
    2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
    3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
    *Configuring the Google Mail account in Apple Mail*
    After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
    In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
    Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
    So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
    Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
    *Some basic troubleshooting tips*
    1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
    2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
    I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
    The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
    Good computing.
    floba
    (Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn't be completed. (CoreDAVErrorDomain error 3.) is shown?

    My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn’t be completed. (CoreDAVErrorDomain error 3.) is shown?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Apple Mail doesn't support IMAP IDLE

    I had started using Entourage for a while just for testing since I had reacently started using a new IMAP server and I wanted to see how all the different email software behaves differently so that I can know what everyone will expect to see. Probably my favorite feature of the IMAP4rev1 protocol is IDLE. This feature gives the client the ability to stay connected to server so that the second an email comes in, it is "pushed" to the client.
    This is very different from the way that with POP3 and HTTPmail that you need to poll the server. Here's the real bummer for me though, my absolute favorite email client, Apple Mail, DOESN'T SUPPORT 'IMAP IDLE'!!!!!!!
    I beg you Apple to please realease a new version of Apple Mail that supports IDLE properly so that the client can stay connected to the IMAP server.
    Other not as important feature requests/bugs that I have:
    * CRAM-MD5 authentication on SMTP doesn't work for me in Apple Mail even though my server supports it and it works fine in other email clients
    * A three pane vertical view similar to Entourage/Outlook... It would just be a nice option
    * Ability to hide individual IMAP folders aka Unsubscribe
    * AND ONCE AGAIN PLEASE SUPPORT IDLE!!!
    Now if I have this all wrong and there is some way to turn IDLE on that is a hidden setting, someone please tell me. I'd be interested in hearing what someone from Apple has to say about this missing feature. Thank you!
    1.5GHz 15" PowerBook Aluminum   Mac OS X (10.4.3)   2GB RAM, 60GB 7200 RPM HD, SuperDrive, iSight

    No, all this does is download all of my emails and cache all of them locally (regardless of what folder they are in). I wouldn't want this to happen because I definitely have over 100MB stored on my email server.
    IDLE is something entirely different... I'm still hoping to get a reply from Apple.
    If anybody else is annoyed with this please file a feature/bug request/submit form at www.apple.com/macosx/feedback/ so that we can try to get this resolved soon via some sort of update. OS X 10.5 is still a ways away so I'd definitely like to see an update to 2.05 before we get to 3.0.

  • How does Apple Mail handle a full IMAP server?

    I am using IMAP on my serverr with the Apple Mail application.  I would like to know what happens when the mail server gets full.  Am I supposed to monitor the amount of room, or does Apple Mail automatically archive the mail entries on my computer? 
    Also, if the server loses its mail, will Apple Mail retain the mail locally or should I create a archive folder to handle any server problems?
    I was using a POP server before and never worried about this because the mail was always on my computer and if the POP server got full or lost mail, I would not lose anything I already received since it was stored locally.

    The state of your server is your issue, if it fills up you won't be able to receive mail. Make a local folder (On Your Mac) and move old mail there.

  • "Apple Mail To Do" and IMAP

    I have an IMAP email account (with fastmail) that I use with Apple Mail (Version 3.5 (929.4/929.2)), and Mail has been creating (and recreating) an 'Apple Mail To Do' folder in my folder list.
    http://problems.physci.sent.com/imapscreenshot
    http://problems.physci.sent.com/mailscreenshot.png
    I deleted the folder from my IMAP web-account, and when I quit and reopen Mail, all is well at both Mail.app and my IMAP web-account. No folders/subfolders in IMAP.
    But that is only until the next time I reopen Mail. The next time I reopen Mail, Mail recreates a new copy of the "Apple Mail To Do" folder, but now nested within two "Inbox" folders (on my IMAP account). In attempt to solve this, I've tried various settings and changes and in so doing, I've tried to delete the folder(s), but all attempts were to no avail. Each time Mail reopens, the "Apple Mail To Do" keeps getting created and nested inside two, three, four, five, six, and more "Inbox" folders.
    http://problems.physci.sent.com/imapscreenshot
    Changing the preference settings in Mail to store Notes and To Do's "on my mac" has no influence on these happenings. My IMAP Path Prefix preferences is set to: INBOX. I'm afraid to change it to anything else because the last time I did that, Mail froze up my Inbox, automatically moved emails to unintended folders, and gave me an annoying pop-up every single time I opened Mail, asking me if I wanted to change my IMAP path preferences.
    I also noticed that when an Apple Mail To Do is created, I lose the unread mail count of my Inbox.
    http://problems.physci.sent.com/InboxUnreadCount
    But my dock unread count is accurate.
    http://problems.physci.sent.com/DockUnreadCount
    I would love to use Apple Mail To Do, and I think for its integrated functionality (to be able to select a sentence in a particular email and make a To Do), it requires a folder in my IMAP email account. I don't know why it creates nested folders, but more importantly I'm just not sure how to go about resolving this. Any advice would be greatly appreciated.

    In case someone else finds themselves in the same spot as I was, a fastmail pro (Rob) found a solution for this that works quite well. It's a long winded one, and I unfortunately don't quite have the time to go into all the details here, but it involves leaving the IMAP path prefix as "blank", and using alternate namespace IMAP ports. Rob has this detailed out in his blog at:
    http://blog.fastmail.fm/2008/08/11/alternate-namespace-imap-port-may-help-outloo k-ol-express-apple-mail-and-bis-users/
    and
    http://blog.fastmail.fm/2008/08/28/proxy-servers-for-alternate-imap-port-may-be- useful-for-blackberry-bis-users/
    For those that are not familiar with fastmail, imho, it is the way to go for professional imap emails. Lightning fast, 'customizable-galore', extremely reliable, and with an excellent support team. But more importantly they are very mac friendly, and works like awesome with Mac OS X Mail. For example, we have business email accounts hosted at fastmail, and I can share a designated "folder" of emails with 2 (or more) business partners, so much so that if one of us clicks an email, it comes up as being 'read' on all of our accounts, and with many many more functions. Really cool. Works well with family accounts (1, 2 or more users), and is simply customizable like crazy.
    http://www.fastmail.fm/
    They also have an awesome beta web-interface with heavy keyboard shortcuts, and they keep enhancing on it, increasing capability, efficiency and functions.
    Beta: http://www.fastmail.fm/beta
    Wow, I feel like a fastmail sales rep, heh?
    Anyway just wanted to post an update, that's all. Didn't mean to go on a tangent there.

  • Apple Mail not working with IMAP account

    I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
    I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

    I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
    I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
    I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
    I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
    Can anyone help with these IMAP access problems?

  • Apple Mail 1.3 and gmail issue. PLEASE HELP!

    Hi All,
    I just bought a g4 imac for my dad and am trying to set up apple mail for him with his gmail account. I have tried everything and I keep gettin this error no matter if it's set for POP or IMAP.
    Applemail 1.3.11 Panther 10.3.9
    Please help a brother out..
    The POP server “pop.gmail.com” is not responding. Check your network connection and that you entered the correct information in the “Incoming Mail Server” field. If it still doesn’t respond, the server might be temporarily unavailable.
    If you continue, you may not be able to receive any email.

    I have had a lot of trouble with the Apple Mail application and OS 10.3.9 and finally just downloaded Mozilla's Thunderbird mail program and it automatically set itself up to work with my .mac mail account. Maybe that would work for you too.
    You can get Thunderbird here, for free.
    http://www.mozilla.com/en-US/products/
    Here are a couple of sites that can help you set it up with bells and whistles.
    http://www.mozilla.org/support/thunderbird/faq#mail.app
    http://opensourcearticles.com/thunderbird15/english/part06

  • Apple mail incorrect subject lines (IMAP)

    I've seen a couple of suggested fixes for this issues but nothing seems to be working.
    Specs:
    Running Version 6.5 (1508) of Mail
    OSX 10.8.4 on MBP 13" Retina
    The issue that is becoming more consistent in occurance is that the subject line for an email may contain the body of an unrelated email (attached example).  Note that I use a great deal of Rules to route mail messages to their appropriate folder.  This issue just started about 1 week ago.
    I have tried:
    1. Rebuilt the inbox and various folders where the issue seems to be more common too many times to count
    2. Synchronized my inbox
    3. Deleted all "Envelope Index" files within ~/Library/Mail folder
    4. Deleting and recreating my Mail account
    If anyone has any other suggestions that would be great.  Not having an Apple friendly mail client that has no issues speaking with my Contacts and iCal is extremely problematic.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Apple Mail accounts defaulting to IMAP instead of POP

    My ISP (Cox) tells me they support both IMAP and POP.  With my old eMac (PPC 10.5.8), Apple Mail was working fine with POP.  However, when I set up my new Mac Mini (10.10.3), the account setup defaults to IMAP and doesn't allow me to change this to POP.  I was involved in this discussion :
    OS X 10.10.3 Apple Mail: 'Remove copy from server after retrieving a message' is no longer an option?
    However, unlike the OP, in my case after pressing the "Create" button, no second display came up, i.e. Yosemite automatically configured the account as IMAP and that was that.
    Anyone have any ideas how I can either edit the new accounts or add a new account so that it uses POP instead of IMAP in Apple Mail?

    You may have to use Add Other Account from the bottom of the email provider list in Internet Accounts.
    So, if this doesn't work for the listed providers, try it with Add Other Account.
    When you get to the screen where you put in the email address and password, hold down the Option key and the Create button will change to Next. Press that and you can manually configure the account.

  • Apple Mail not sending Gmail Imap

    Hey I have Gmail on my Apple Mail using Imap and it was working fine until about a week ago when it stopped sending so I tried re-adding an Imap account but cant even create one
    Anyone else had this problem, any ideas?

    Hello,
    What size are these attachments & what extention/file type are they?
    gMail has been known to refuse say .zip files, & of course attachments over a certain size.
    One big drawback on Apple Mail is that if you have a malformed or non compliant eMail, it'll prevent anything beyond that, just keeps trying & failing to progress to the next one.
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • Have to quit Apple Mail to receive new IMAP emails

    I am using IMAP email services from Cox Communications.  When I leave Apple Mail running on my MacBook Air it will not receive any new emails.  Only when I quit Mail and relaunch the app will it receive the new emails.  What boggles my mind is it works perfectly on my iPhone and iPad?  What is causing this hang up with Apple Mail when all my settings are the same as they are in my iPhone and iPad?  This has been a problem since I began using IMAP back when I was running Snow Leopard.  Very frustrating, any ideas?

    This is also one of my problems with Leopard (among others like missing 'new mail' sound and - since 10.5.2 - dropping Airport connections). I have a Fastmail account and while IMAP seems to work fine with it for a while after having started Mail (as verified by sending mails from the web interface of one of my other email accounts to the Fastmail account), it stops responding to new Mail after I leave it alone for a while (20 min or so).
    Manually checking for new mail doesn't help. When I open Mail's activity window by pressing 'cmd+0' I can see that it does connect to the server when I check manually, but it behaves like there is no new mail available. And yes, it is configured to use the IDLE command. Only restarting Mail.app will fetch the new mail.
    On my mobile phone (Nokia E61i) this works perfectly, as soon as I get a new mail my phone notifies me of it immediately, so the IDLE command feature of the server works.
    I'm really starting to be very disappointed by Apple. This is a standard feature of every decent mail client, this really has to work, and not only with .Mac accounts. I have installed Thunderbird now and while that indeed seems to work better I would hate to switch because Mail.app is really much more nicely integrated into the system. But if these problems persist I might end up having to do just that.

  • How to only download/sync Apple Mail 6.3 with IMAP server manually

    All my various e-mail addresses get forward to my AT&T/Yahoo e-mail server which I just started downloading/syncing with IMAP when I started using my new MacMini.  For years, I had just downloaded straight using POP.
    I use IMAP to generally just download to my Inbox.  Fairly simple.  And I generally like to 'thin-out" my ATT/Yahoo Inbox on the server using the yahoo Mail app on my iphone before I download to the Mini.  
    The problem is, I can't keep Mail 6.3 from syncing with the server on its own!  How can I totally control Mail and tell it to sync/download only when I want it to happen. In Mail preferences > Accounts > advanced, I unchecked "include when automatically checking for messages" box.    Also, in Preferences > General I've selected Manually for "Check for new messages:".   Is there anything else to do?  Thank you.

    All my various e-mail addresses get forward to my AT&T/Yahoo e-mail server which I just started downloading/syncing with IMAP when I started using my new MacMini.  For years, I had just downloaded straight using POP.
    I use IMAP to generally just download to my Inbox.  Fairly simple.  And I generally like to 'thin-out" my ATT/Yahoo Inbox on the server using the yahoo Mail app on my iphone before I download to the Mini.  
    The problem is, I can't keep Mail 6.3 from syncing with the server on its own!  How can I totally control Mail and tell it to sync/download only when I want it to happen. In Mail preferences > Accounts > advanced, I unchecked "include when automatically checking for messages" box.    Also, in Preferences > General I've selected Manually for "Check for new messages:".   Is there anything else to do?  Thank you.

  • Apple Mail stopped recognizing GoDaddy imap

    Sometime on 2/1/12, my Mail program stopped being able to receive mail from my GoDaddy account. I can send mail from that address using the Mail program, and my iPhone receives and sends fine with that address, but my laptop can no longer receive incoming mails.
    All updates current.
    I've checked all the info and passwords, and haven't found a solution.
    Anyone else have and resolve this issue?

    I hadn't connected those two things. There has to be a workaround other than "never update my computer again".
    Any other thoughts?

Maybe you are looking for

  • Smart playlists for file location?

    I have half my music on my powerbook hd, and half on an external drive. I want to create a smart playlist of all the music on the internal drive, and one of all the music on the external. Is this possible? Perhaps I need something else though... I wa

  • Get doc date according to material no

    Hello all, I am working on a query which gets the po orders, document date and material numbers associated to it. My need is to get the latest document date by the material number. My date is a characteristic and not a key figure  therefore i cannot

  • What happened to the photoshop cs6?

    I have been trying to find it but can't

  • Compiling /usr/ports/java/jdk15 error

    Topic: compiling /usr/ports/java/jdk15 error From: Vizion <[email protected]> Hi I am compiling the FreeBSD port onto FreeBSD 5.3 and do not have enough experience to identify the cause of the error. I have raised the question on the FreeBS

  • OS X 10.6.4 Update taking FOREVER to download

    Just got a brand new Macbook a few days ago, running OS X 10.6.3. When I run software update and try to download the 10.6.4 update, it will literally take days to download. I tried going directly to the Apple Support downloads with the same results.