Apple Mail 6.2 Exchange 2010 Delete Fail

When deleteting an email in Apple Mail 6.2 setup to use Exchange 2010 with MAPI, the following error message is displayed:
The message "X" could not be moved to the mailbox "Trash folder name".
An error occurred while moving messages to mailbox "Trash folder name".
To reproduce this problem I loaded a mailbox with 30k of emails. I then deleted 4000 messages, and while the client was still syncing (visibly you could see it syncing the activity window) - I deleted some of the same messages again.
The sync process stopped, the activity window stopped showing any activity and my emails which were previously marked for deletion remained visible.
Now when I try to delete the emails I previously deleted, I receive the error as above and the messages are not deleted.
If I delete other messages that were not previously marked for deletion I do not receive the error.
To remove the messages that were causing the error I had to "Command-X" to cut them from the folder and bypass the trash.

Hi Andrew,
I tried to understand your message but failed to. I'm sorry. Just clicking "rebuild" worked for me to restore behavior that hadn't been working. It only took a few seconds.
That said, it was only days later that all of my correspondance stored on the Exchange server disappeared, and 123Together, my Exchange service provider, said "Since you are on a Mac the database may gotten corrupted and synched to the server that is why the data in the mailbox and subfolder you may not see. We can have our admin do a restore of the mailbox as we can go back for a restore point up to 5 days, there is a admin fee of 160.00 hr anywhere from 1-3 hours of work please let us know if you would like to proceed." I was not happy.
So I probably agree with what you are saying!
Larry

Similar Messages

  • Apple Mail and MS Exchange server?

    In a strange twist of fate, our new university President is a Mac guy (yeah!), but he is obligating all of us to put email and calendar software into MS Exchange server. Sadly, it means I will need to migrate 4 GB of emails from Apple mail to Entourage.
    Does anyone know of a solution that will allow me to continue using Apple Mail?
    I also favor NOW Up to Date & Contact for calendar and contacts. Any ideas on connectivity between Exchange server?
    Thanks.
    Intel iMac   Mac OS X (10.4.9)  

    Rats! I just heard from our IT department. The reason Apple Mail is not supported is that it requires IMAP to be turned on. They claim that "IMAP passes passwords and mail in clear text which is a big security problem. Exchange natively sends all of its info in an encrypted manner. "
    Is there a way to get Apple Mail to use Exchange Server without IMAP in a way that will get these security freakish IT folks to be happy?

  • Exchange 2010, khi: failed to execute Troubleshoot-DatabaseSpace.ps1 Error formatting a string: Format string is not supported

    Hi,
    Exchange 2010 MP fails to run Troubleshoot-DatabaseSpace.ps1. Results in a Warning with "Error formatting a string: Format string is not supported". The EventNumber is 402. The Microsoft article it points to is useless at http://technet.microsoft.com/en-us/library/749e0eac-ebb2-41e3-8fa2-4a03a1bd3571.aspx 
    Run ".\Troubleshoot-DatabaseSpace.ps1 -Server MailboxServer.domain.com -MonitoringContext" and works fine.
    Any help appreciated.
    thanks

    Hi,
    Before the newer MP release, we can disable  these 4 monitor via override and this should not run the Troubleshoot-DatabaseSpace.ps1 :
    KHI: Failed to execute Troubleshoot-DatabaseSpace.ps1.
    KHI: The database copy is low on database volume space and continues to grow. The volume is under 25% free
    KHI: The database copy is low on database volume space and continues to grow. The volume has reached error levels under 16% free.
    KHI: The database copy is low on database volume space and continues to grow. The volume has reached critical levels 8% free.
    Alex Zhao
    TechNet Community Support

  • How do I easily select a group of emails in Apple Mail if I want to delete them? In other words, how do I select the first and last message and delete everything in between?

    How do I easily select a group of emails in Apple Mail if I want to delete them? In other words, what do I select if I mark the first and last email to delete everything in between? Thanks.

    I have this same issue. I have over 100 email addresses that I need to add to a group. The issue is not making the group, it's getting the email addresses from Mail to Contacts.
    Dragging the email addresses does nothing. You can copy the addresses, but there's nowhere to put them. You can make a VCF for an email address, but then you have to find all of them to add them to the group. How do you automate this?!
    I'm astounded that there's so little support for such a common issue for which people have been asking for years.

  • Emails are "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server.

    Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.

    No that is not it:
    Open Mail>Preferences>Accounts, the first page has this on it
    If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
    If you select Edit SMTP Server list you get this:
    Post it here and, select the Advanced Tab (which looks like this)
    Post this page as well.

  • Apple Mail problem with exchange server

    Hi
    I configure my both Apple Mail and Entourage to link with my work's MS outlook exchange server. Apple Mail is using Exchange and Entourage is using SMTP. Both work fine receiving and sending while i am in the office. However, when i am home or using USB modem, it will only receive and will not send. Can anyone advice what is the issue?
    Thanks

    well your work IT guy "should" know which IP address is needed to access from within the work network and from without depending on how he has set up that Exchange server... else it is time to find another IT guy It really is an exchanger server issue, not an Apple Mail issue.
    For example, I have been given two IP addresses to use for the outgoing server, and I toggle between one and the other when I want to send email via my exchange account.
    hope this helps

  • Mailbox transfer from Apple mail to Windows Outlook 2010

    There were thousands of emails in Apple mail email client. I sorted out and maild mailboxes for different types of emails. I separated work-related eails and other stuff related emails and made mailboxes for each. Now I want to move the work-related emails
    to my windows laptop in Outlook 2010 email client. 
    I did try to sync the emails via Imap but the synchronization fails every time I try to sync the emails. I have double checked everything many times before synching but it always fails. Now I am sick of doing it as there are 10k plus mails and the sync is always
    failing.
    Is there any other way to transfer the mailbox from apple mail to outlook 2010. It would be very helpful of anyone can guide me to transfer only the work mailbox folder as syncing via Imap starts downloading all the emails including the others. 
    I just need to transfer the work folder.
    Helpful solutions will be really appreciated.

    Hi,
    The easiest way to transfer data from Outlook for Mac to a Windows-based Outlook client is to upload to an exchange server. To do this, please refer:
    http://support.microsoft.com/kb/2649169/en-us
    However, if that option is not available use one of the methods listed in the link below:
    http://www.office.mvps.org/cross_platform/mac_win.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Exchange 2010 EMC Failed Initialization

    Hi
    Server 2008 64bit SP2 running on hyper V
    Just done an install of exch2010 on a vanilla test DC 2008,  passed all the readiness checks after installing all the bits and pieces. I also ran the following:
    1) winrm quickconfig
    2) For a server that will have the typical installation of Client Access, Hub Transport, and the Mailbox role:
    sc config NetTcpPortSharing start= auto
    ServerManagerCmd -ip Exchange-Typical.xml -Restart
    all seemed to install OK but when I try and start the EMC when clicking on the "Microsoft Exchange ON-Premises" I get an initialization failure with the following detail:
    The following error occured when searching for On-Premises exchange server:
    [testdc08.company.com] Connecting to remote server failed with the following message : The WSMan client
    cannot process the request. Proxy is not supported under http transport. Change the transport to https and
    specify valid proxy information and try again. For more information , see the about troubleshooting help topic
    I understand this stuff is to do with remote managing exchange servers across the internet, but in my case I am trying to simply access the exchange server (on the DC) from the DC??? 
    Can anyone shed light on this install of doom,
    thanks

    Dear All,
    I have faced same issue with my exchange 2010 server on Windows 2008 R2 O/S. There is some problem in my winhttp settings (proxyycfg). To resolve this issue I deleted WinHttpSettings from registry keys. It will reset it to default. Below is the key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\Connections\WinHttpSettings
    -->Delete WinHttpSettings
    Regards,
    Khurram Awal Khan
    Senior System Engineer
    Alnafitha Int.
    Hi Khurram
    This worked for use as well.  Thank you

  • I need to get a copy of my childs incoming and sent yahoo mail in Apple mail without it being able delete on either end to affect both?

    How can I get a copy of my childs incoming and sent yahoo IMAP address e-mails in Apple Mail? It has to be without each being able to affect the other meaning ( if something is deleted in one it doesn't affect the other).
    I did previously add my childs yahoo e-mail account to Apple mail but did not Sync it. But, as soon as I deleted an e-mail in Apple mail it did so in my childs yahoo mail & and vise versa. Is there another way I am missing?
    Thanks in advance for your help it is much needed!

    How can I get a copy of my childs incoming and sent yahoo IMAP address e-mails in Apple Mail? It has to be without each being able to affect the other meaning ( if something is deleted in one it doesn't affect the other).
    I did previously add my childs yahoo e-mail account to Apple mail but did not Sync it. But, as soon as I deleted an e-mail in Apple mail it did so in my childs yahoo mail & and vise versa. Is there another way I am missing?
    Thanks in advance for your help it is much needed!

  • Can't Send email w/Apple Mail connected to Exchange Server 2007

    I've tried to connect to our OWA Exchange server w/Entourage and nobody can help me to make it work. I can connect w/Apple Mail and recieve fine, but I can't send email. Any ideas or suggestions on how to allow me to send out email w/Apple Mail??

    Hello:
    I have the same issue. I am on a Macbook Pro 2 Gb RAM Rev A. OS X 10.5.3 apple mail 3.3. I have setup a corporate exchange owa (2007) account and can receive emails. I cannot send any from this exchange account. on the same Mac I have Entourage and it can receive and send emails. What is the difference and what do I have to do to make Apple Mail work and be able to send emails as well.
    Thanks,
    [email protected]

  • Exchange 2010 - deleting IIS Advanced log entries

    Hi
    I am trying to increase the free space on the system drive of our Exchange 2010 servers.  Is it OK to delete the entries in
    inetpub - Logs - Advanced Logs?
    Thanks
    J.

    Hello,
    You can also use a scheduled script:
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/d989b249-0159-41fc-b78c-1f1d91ce8bb3/inetpublogslogfilesw3svc1-getting-very-large?forum=configmgrgeneral
    Thanks,
    Simon Wu
    TechNet Community Support

  • Exchange 2010 Initialization failed (Initialization failed) The WinRM client received an HTTP server error status (502)

    i have Server 2008 r2
    exchange 2010 evrything was working fine but now when i try to open the Exchange management console i get this errore
    the follwing error ocurred when serching for on premises exchange server
    Connecting to remote server failed with the following error message:
    The WinRM client received an HTTP server error status 502,  from the remote ws-managment servic   For more information, see the about_Remote_Troubleshooting Help topic. It was running the command
    'Discover-ExchangeServer -UseWIA $true -SuppressError $true'.
    please help
    Mahmoud Hanefy

    Anything in the event logs?
    Any help from:
    http://msexchangeteam.com/archive/2010/02/04/453946.aspx
    Troubleshooting Exchange 2010 Management Tools startup issues

  • Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

    Good morning,
    I have major problems with exchange 2010 this morning.
    First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
    I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
    Initialization failed
    The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
    The attempt to connect to
    http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
    other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
    I followed the steps listed here:
    http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
    but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
    Any help would be much appreciated.
    Best regards
    Katrina

    Hi,
    I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
    Please follow this steps:
    Install WinRM IIS Extension, adding this feature from Server Manager.
    Change  IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6. 
    To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain. 
    Maybe you obtain TCP/IPV6 address response.
    Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
    To change IPv4 over IPv6 lookup group prefence, follow this steps:
    Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
    On DisabledComponents subkey, double click, change de value for
    0x20 (or 4120 Hexadecimal). this value make  the Windows OS to prefer IPv4 over IPv6.
    Repeat the test, on command prompt:
    ipconfig /flushdns (Enter) to flush DNS cache.
    ping yourserver.yourdomain.domain.
    At this moment you obtain TCP/IPv4 address response.
    To check Exchange Managment Console operation, you must restart the server.
    Please restart the server.
              Best Regards,

  • Exchange 2010 Initialization failed Access is denied

    Hi
    I try to run EMC but cannot run due for this error message appear
    Initialization fail
    The following error occurred while searching for the on-premises Exchange server:
    [server.pc.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting  Help Topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
    $true -CurrentVersion 'Version 14.1 (Build 218.15)".
    Can anyone help me out on this Im new to Exchange 2010 and this is my first installation and come up with this error.

    Hi
    Access denied error. is your account a full admin in exchange? Can you right click the EMC and run as administrator?
    did you do a reboot after your installation?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Deleted emails in Apple Mail IMAP account reappear after deleted

    I delete the emails in my Apple Mail for an IMAP Gmail account, but the email keep reappearing as undeleted.

    Thank you so much!!!
    Just switched to IMAP from POP and this was really bugging me. 
    Force closing Mail worked for me too.

Maybe you are looking for