Apple Mail not sending with the selected from address

I have Apple Mail 6.2 on a MacBook Pro with ML 10.8.2.
I have sever email accounts set up.
I cannot get Apple Mail to properly use a given accout in the from.
No matter what from account I what Apple mail to be from, the received email shows one of the other not selected accounts.
So this means that the reciever replies to the wron & not intentded address.
Example:
I do an email in the [email protected] account & select [email protected] as the from address.
The reciever will see the email from another address in Apple mail like [email protected] that I did not select.
How do I get the Apple mail from email address to be the one I want the reciever to reply to?

By associating each account with the correct smtp server.
You have 2 gmail accounts, so 2 gmail smtp connectors, set them correctly.

Similar Messages

Clean-up all data that did not match with the selection.

Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...

Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen

Apple mail not showing all the messages?

In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?

Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though!

Can not resize with the selection tool

can not resize with the selection tool

joc,
I believe you may have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587

Apple mail not sending via my server hotmail.

apple mail not sending via my server hotmail. Please help

How would you like us to help when you don't provide any details. We don't have a crystal ball.

AT-MIO-16XE-50 device is not responding to the selected base address

I'm trying to install my AT-MIO-16XE-50 DAQ board onto my Windows NT desktop computer, but I'm having trouble.
Here's what I've done: I've installed LabView 5.1 and the NIDAQ 7.0 software onto my computer first. Then I've physically installed the DAQ board into my computer. After starting the computer, the plug-and-play system seems to recognize the new hardware and install drivers for it. It then says I need to reboot the computer, so I reboot the computer.
When I then look at my device manager, it lists AT-MIO-16XE-50 twice. Under the properties/resources tab, one of them lists "input/output range", "interrupt request", "direct memory access", and "direct memory access" (i.e., 2 "direct memory access"s). The second one only lists "direct memory access" once and nothing else under the properties/resources tab. Also, the first one says that it is working properly while the second one says that it is not working properly (Code 10). I've played around with chaging the "direct
memory access" numbers and after rebooting the computer have gotten both AT-MIO-16XE-50's in the device manager to say that they're working properly. So, now the DAQ board appears to be installed correctly, because the device manager reports no problems with it. However, there are still 2 of them. My first question is this: should there be only 1 entry in the device manager list, or are there supposed to be the 2 that I see? The entries do appear to be different from each other, but they're for the same device, so that's a little confusing.
When I open my Measurement and Automation explorer, only one AT-MIO-16XE-50 device is listed (so this looks good), and under "properties" all 3 "direct memory access" numbers are listed. So, this all seems good. But, when I click on "test resources" or "test panel", I get an error message saying that "the device is not responding to the selected base address". Considering that this device was plug-and-play, and I did not set the base address manually, I don't understand why I'm getting this error message.
What I've tried is to change the "input/output range" number by using the device manager. I've tried a few different settings (rebooting the computer after each change) and none of the different "input/output range" settings seem to work.
I'd appreciate it if you could give me any help on figuring out how to resolve this "not responding to base address" problem. The info on your web site
appears to suggest flipping dip-switches on the DAQ card, but my card does not have any dip switches because it is plug-and-play. So, right now I'm
clueless! Thanks for reading this, and I hope that you have more insight than I do.

Smaria,
The AT-MIO-16XE-50 shows up twice in the Device Manager because it reserves three DMA channels, and the ISA bus only allows two DMA channels per ISA slot. You mentioned that you were able to get both devices working properly in the Device Manager. Below is a link to a KnowledgeBase that describes the proper procedure to successfully accomplish this. You should verify that this is the procedure you followed:
Exclamation Mark Appears with Error Code 10 on Windows XP/2000/98 After Installing AT-MIO-16E-10
Spencer S.

The device is not responding to the selected base address

my DAQ card is PC-LPM-16, a few days ago, i configed it properly. and i didn't use it for a few days, but didn't plug out from my computer. today i want to use it, but the MAX test showed that "The device is not responding to the selected base address." i setup my hardware and software again, but still can't resole it, what can i do now?
thank you very much.
liyongqin
2001-10-23

"The error could be happening for a variety of reasons. The first thing I would do is to visit www.ni.com/support/daq and follow the installation procedure, which includes troubleshooting steps on the error you are receiving.
If that doesn't work then try to install the board in another computer with no other devices installed. This will test to make sure the board is not bad. If all else fails call National Instruments and have someone troubleshoot the board and return and repair it if necessary."

Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

Device is not responding to the selected base address-DAQCard-AI-16E-4

Configuration: WinXP, Labview express 7 evaluation, & DAQCard-AI-16E-4
Driver installed : TDAQ741
Without the PCMCIA card in my laptop, I have installed my Labview and then the driver TDAQ741. When I opened the Measurement & Automation Explorer and tried the Test Panel, I'm getting "The device is not responding to the selected base address."
Can anyone tell me how do I fix this problem?

Hi yoyoman-
Common solutions to the "...not responding to the selected base address..." error are suggested in this KB. Please take a look and let us know if you still run into problems after trying these.
Thanks-
Tom W
National Instruments

Mail (Mavericks) replies with the wrong email address

Currently using Mavericks, 10.9.5, on my MacBook Pro (15", early 2011 version), and the default Mail app.
I belong to a fair number of email discussion groups, most specifically with Yahoo! Groups, and I've set up a specific account and email address for use with that service. I also have currently setup several other email addresses within Mail, all seven of them are POP3 accounts.
Yahoo! requires me to send email to the group from the address that is registered, but Mail doesn't use the correct email address as the default when I reply to the posts despite the fact that the original message was sent to the correct account. Mail uses the email address from the account that's at the top of the Inbox listing for the address, not the one I want used. I usually find out that messages sent were on the incorrect address when I get the bounce back from Yahoo! indicating I sent from the wrong address. Digging through the sent items, setting the address correctly and resending fixes the original fault, but my iPhone (all versions of iOS 6, 7 and 8) replies correctly, but Mavericks Mail does not.
Has anyone else had this happen to them, and was the upgrade to Yosemite the fix? Or is it still broken there?
TIA,
Jon

Open Mail preferences and select the Composing tab. Check the Send New Messages From box and see what is selected. Either select an account to send from as default or select Account of selected mailbox.
Also open the Accounts tab and check the outgoing server for the account. Be sure you have the correct SMTP server set for that account and check the box to use only that server for that account. Do the same for all accounts making sure you have the correct server for each account. If there is a problem with that server, you will get a pop up asking to select a different server in the event of a failure. Otherwise, if that box is not checked, it will just select another server if there is a problem with the one for that account. That could be your problem.
Send a test message to verify that. You can also reorder the mailboxes under the inbox by dragging each to the order you want. Depending on the settings in preferences, either the highlighted account will be the sending account or the default address you set in the list. Replies should always come from the address that was sent too.

Apple Mail not working with Gmail IMAP

This is a slight re-working of a post of 27 March as I am being driven nuts having to use web mail.
I have used Mail with gMail for years. Last week I was abroad and I could only use the web interface as when I logged in from my MacBook via Mail the message pane was fine (and up to date though it did not open by default as usual) but if I opened any message all I got was 'Loading' followed by the spinning beach ball. I tried this for several days and always got the same result and assumed it was an (atypical) result of being abroad.
When I got home I found I had exactly the same problem on my iMac which was fine before I left home and as with my MB I have to force quit to get out of Mail.
I then when out and after a restart (not the first since the problem) that my MB was OK - but only briefly. My iMac is still stuffed as far as Mail is concerned.
Mail itself does not seem completely broken, for instance I can look at Previous recipients, I can send from Mail and it arrives back (but then I can’t open it). I can drag messages to the Bin, but they don’t seem to stay there. Oddly I have sent a lot of mail from the gMail interface today, but none of them show up in Apple Mail, tho earlier days do.
I do have a lot of messages in sent mail, nearly 6,000, and while I can understand it progressively slowing things down I don’t see that it would cause both machines to fail simultaneously and anyway I don’t want to delete them.
Any ideas? There are no error messages, Connection Doctor shows me as logged in, and I have not found anything via a Google search or in their discussions.
Cheers, Colin

Opps, the * was an OCR error from the screen dump I did not notice.
plus.net is my ISP, but I don't use them for mail normally but I suspect once-upon-a-time I may have had a problem connecting with gMail's SMTP server, so set that up.
I'm actually running Mail 3 (I think the latest version for Leopard, incidentally gmail help is only up to v 2).
Rather than delete the other servers I have set it to only use smtp.gmail, but it still hangs on opening a message pane. Oddly even tho I get the beech ball I can still open prefs.
I can't help feeling the problem is with Mail itself (tho why on two machines at once is beyond me) as the normal behaviour is always to open with the Message pane, but it opens without a window; almost as soon as I open the Message pane it updates with gmail and deletes any message I have moved on the web side. So, only partly broken, but broken enough to be useless!
Cheers, Colin

Apple Mail not sending Gmail Imap

Hey I have Gmail on my Apple Mail using Imap and it was working fine until about a week ago when it stopped sending so I tried re-adding an Imap account but cant even create one
Anyone else had this problem, any ideas?

Hello,
What size are these attachments & what extention/file type are they?
gMail has been known to refuse say .zip files, & of course attachments over a certain size.
One big drawback on Apple Mail is that if you have a malformed or non compliant eMail, it'll prevent anything beyond that, just keeps trying & failing to progress to the next one.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Apple Mail not working with IMAP account

I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
Can anyone help with these IMAP access problems?

Apple mail not syncing with hotmail e-mail on iPhone

I just bought a MacBook Pro a couple days ago and before when I was using my PC my hotmail account on my PC would sync with my hotmail e-mail on my iPhone 4. Since I setup my hotmail account in Apple Mail it is not syncing with my iPhone. When I delete it on my Mac or show it as read, it still shows as unread on my iPhone. This did not use to happen. Can someone help me, so I can get my Mac and iPhone to sync my e-mails?
And I cannot see all my Hotmail folders in Apple Mail.
Thanks!

Thanks for your reply.
The problem is that I've got many years of emails saved on my hotmail account and I've got other different email addresses set up to forward their emails to this account. Due to the nature of my work, I also regularly have to search back through my emails.
It looks like my only option currently is to use an icloud account and have all of my other email accounts all forwarding emails to that instead. Unfortunately, this doesn't solve the problem of being able to search back through my emails, though.
Does anyone know how the iphone manages to successfully connect with hotmail accounts (as though using IMAP). As I said, my iphone works absolutely perfectly and is fully synced with the hotmail server. I know it's something to do with 'microsoft exchange' but I really don't understand what this is and how it works.
Thanks, Matt

HT5624 I have two mail accounts and one Icloud account. Thproblem is mail is going out with the incorrect sent from address. I deleted the mail accounts and added just one account back and mail still goes out with the incorrect from address and people res

My phone will not5 send from the correct address tht I want my mail sent from. Although my mail goes into the correct mail accout answeres leave with the incorrect sent from address.
I want to be able to send mail corectly.

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

Apple Mail not sending with the selected from address

Similar Messages

Maybe you are looking for