Apple Mail shows duplicate message in Sent mailbox - HOW TO FIX IT?

I have sent a message with Apple Mail 7.3 on Mac with OS X Mavericks 10.9.3, and it shows DUPLICATED in the Sent mailbox of Mail. I mean, two entries with the very same message inside are displayed, yet, as said, I only sent it once! I am using POP.
Selecting "Mailbox - Rebuild", quitting and opening Mail, repairing permissions with Apple Disk Utility, restarting the Mac, and even resetting the PRAM does not fix it.
I have seen the following article, but cannot find the "MessageSorting.plist" in Mavericks that it indicates:
How to Fix Duplicate Emails Sent From Apple Email
http://www.ehow.com/how_12135498_fix-duplicate-emails-sent-apple-email.html
Any idea on how to prevent this duplication behavior (beyond deleting one of such messages, which, of course, I can do); I mean, to fixing whatever is corrupted and prevent such behavior happening again in the future?
What is the equivalent of "MessageSorting.plist" in Mavericks to do what indicates the above article?
Thanks.

I have exactly the same problem. Didn't find a solution yet.

Similar Messages

  • Apple Mail Client - No Messages in Sent Mailbox

    I am using the Apple Mail client with Yahoo! IMAP. For some reason, sent messages no longer appear in the Sent Mailbox. Why is that?

    Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
    Rebuild mailbox

  • Apple Mail shows Blank Messages on Exchange Account

    I have three email accounts. Normally, they all work well but more and more frequently my Exchange account shows a message in my inbox but when I click on it, the body is blank. I've clicked to check messages, resynchronized the server even deleted the account and reset it again. The problem still returns. Here is the oddest thing. I think it is only for email sent internally. That is email from outside of the organization don't exhibit this problem. Also, once I view an email from outside the organization, the internal email shows up again.
    Another issue is that when I send an email using exchange to an internal recipient, I often receive the challenge to select a server and then it fails and I have to select it again. After selecting the Exchange server two or three times, it sends. Unfortunately, my recipients receive the message every time so they will get two or three copies of the same message.
    We are using Exchnage server 2007.
    Any thoughts?

    I manage an Exchange 2007 and I have been having this issue for over a month.  It was effecting all of the Mac Computers that we support.  The good news I was able to fix it last night after reading about a similar problem with Blackberry phones.  Unfortunately, you will need to either be the Exchange admin or have influence in your IT Department.
    On the Exchange server the Performance Counters need to be verified and it is found in the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\Current Version\Perflib\009
    When you viewing the key in explorer mode I found that it was basically blank.  It should read like the following:
    1 1847 2 System 4 Memory 6 % Processor Time...
    If its blank it corrupted.
    Supposidly this was caused by the update to Service Pack 2 upgrade...  However, I did that a 6 + months ago.  The only change since then was that the server was virtualized to VMware.
    Here is what you do to fix this:
    (Note: This was done on a Windows 2008 R2 Sever...  However, it should work on 2003 and 2008 as well)
    Launch the Windows Command Prompt (cmd), ensure that you run the Command Prompt as the Administrator.  For example, click Start, click All Programs, click Accessories, right click Command Prompt and click Run As Administrator.
    Change Directory to <root drive>\Windows\System32, the root drive is typically C:.  Run the following command
         lodctr /R
    This will restore the base or core counters
    Check the registry value under HKLM/Software/Microsoft/WindowsNT/CurrentVersion/Perflib/009 and ensure that the value Counter is no longer corrupted.
    In the Command Prompt window, run the following command:
         wmiadap /f 
    This will force the reload of all counters in to the WMI repository.
    Open Performance Monitor (perfmon.exe) and click the green + to Add, this will open Add Counters. Verify that the MSExchange counters exist and have Instances populated.
    Restart the Microsoft Exchange Server computer.
    NOTE: This step is required.
    Hope this helps someone! 

  • One of 4 sent messages doesn't show up in the Sent mailbox - why?

    Here is a strange thing I noticed just now. Thought it seems email has sometimes not been showing up in the Sent mailbox at other times as well.
    I sent an email to somebody.
    Using the "Send again" feature I sent it to a 2nd person.
    Then I did the same thing to a 3rd person, and noticed the 2nd email wasn't in the Sent box.
    Then I did the same thing to a 4th person, and noticed the 3rd email wasn't in the Sent box, but the 2nd mail appeared.
    So the Sent box is currently showing 3 emails sent - apparently always not showing the next-to-last one sent.
    This is Gmail, and I confirmed directly at Gmail that all 4 emails are in the Sent box. So the mails were all sent, and it appears to be an Apple Mail oddity where some mails are just not appearing up in Sent.
    Anybody else seeing this?
    I am using OS X 10.10.3.
    Thanks,
    doug

    As a followup, in Mail on my iPhone 6 Plus running iOS 8.3 I do see all 4 sent mails. It's just in Apple Mail where I don't.
    doug

  • Apple mail not uploading messages from server

    i've got a weird problem - about a week ago, my apple mail program stopped uploading messages to one of my emails accounts. i've been getting messages to that account, and when i right click on the account, apple mail shows me that i have like 100 + unread messages on my pop server, but for some reason, it isn't uploading the messages so that i can access them.
    i've spent nearly 2 hours troubleshooting. i even deleted the whole account and made it again, and it did the same thing. this makes me think there is something with my email host or something.
    any ideas?

    When you say “uploading” you actually mean “downloading”, right?
    Sometimes messages left on the server clog up the account there, or Mail chokes on a message it cannot download and that prevents it from downloading the rest as well. Solving this problem will probably require deleting one or more messages from the server. What are your Preferences > Accounts > Advanced > Remove copy from server settings for this account?
    You may tell Mail to remove from the server all the messages that have already been downloaded doing Preferences > Accounts > Advanced > Remove now. Alternatively, you may use the Account Info window to remove specific messages from the server. And if the account allows web access, you may also remove messages from the server that way.
    Try first removing from the server messages that have already been downloaded. If that doesn’t work, you’ll probably have to delete the first message not downloaded yet. You may want to try to download those messages with another mail client such as Thunderbird first, to avoid losing them -- and use Eudora Mailbox Cleaner to import them back into Mail afterwards if you wish.

  • Sent mail does not appear in sent mailbox after sending

    Sent mail does not appear in sent mailbox after sending

    From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the line below on this page to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

  • Showing two messages being sent.

    I sent an email to 1 person. Mail showed two messages sending out. When I checked my sent box it only showed one sent. Does anybody know why it would show two messages going outbound?

    One reason might be in Mail's Preferences.  Look there (under Mail in the Menu bar), and choose the "Composing" tab.  Have you checked the box under "Composing" that says "Authormatically cc myself"?
    If not, look in your sent folder to try to locate the two messages.  There might be a twirly arrow that you may have to twirl next to "Sent" to show all your various account "sent" boxes.

  • Apple Mail shows iCloud as offline with my Apple ID

    Apple Mail shows iCloud as offline with my Apple ID, but works fine with wife's different Apple ID

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • 10.6.7 apple mail - search 'entire message' is greyed out

    10.6.7 apple mail - search 'entire message' is greyed out
    can't use it - other choices ok
    was working yesterday...
    hw do I get it back?

    See the discussions at:
    https://discussions.apple.com/message/15146088#15146088
    Can be temporary with POP perhaps, but should work.  With IMAP, it is required that copies of messages be kept for local searching.
    More info, please.
    Ernie

  • When I send an email message, my Mail shows two messages outgoing instead of just the one I am sending.  What is going on?

    When I send an email message, my Mail shows two messages outgoing instead of just one. 
    What is going on?  Is it possible some "spyware" has crept in?

    There is an email address on my website that automatically forwards to my "regular" email address, but this problem predates setting up that website.  My primary email is a bellsouth account (AT&T) which switched to a Yahoo mail-supported service....so based on your comments, perhaps that is why the activity is looking weird.

  • Why does my Apple Mail insert old messages into the body of new emails?

    Why does my Apple Mail insert old messages into the body of new emails? The correct sender's name will appear in the "From" column, but an old message from a different sender in the body. This happens randomly. I have an iMac OSX 10.6.8. I recently had the hard drive cleaned, but Apple Mail seemed to be running fine when I set it up again. Could this be a virus? What should I do about it? Thanks for any insights!

    Thanks.  While you were replying to my question, I went into notifications and figured
    it out.  Appreciate the quick response!

  • Connection 8.5 duplicates messages in Subscriber mailboxes?

    Which Connection 8.5 service might be responsible for duplicates messages in Subscriber mailboxes?
    Cluster Connection 8.5(1)SU1 secondary takes calls, a handful of Subscribers are reporting if I leave them a Message they get it twice.
    Should I restart the Connection Message Transfer Agent ? I’m just guessing this is a replication problem ?

    There is a known bug with Connection 8.5(1)SU1 if you have a Connection Publisher and Subscriber. Something about filesyncer bug.
    This is fixed in SU2, however I am still having a very small number of reports of duplicate .wav file attachments even with SU2.
    Please open a tac case.

  • I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this.

    I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
    When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
    Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
    How can I add my iPhone 5s to the list of devices on the correct Apple ID?
    Thanks in advance for any advice.

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

  • TS3276 I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server.  How can I get the messages on the server to go to my Inbox so I can access them?

    I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server.  How can I get the messages on the server to go to my Inbox so I can access them?

    Make sure Mail is selected in System Preferences > iCloud

  • My Creative Cloud desktop don't show my apps actualization or download, how i fix this? The message says "Download error"

    My Creative Cloud desktop don't show my apps actualization or download, how i fix this

    Hi Eduardo Vieira,
    Please refer to the threads below where this issue has been fixed:
    1. Re: Creative Cloud "Download Error" message
    2. https://forums.adobe.com/thread/1156604
    Regards,
    Sheena

Maybe you are looking for

  • ARD or DS for deployment over WAN?

    Hi, I was hoping to get some advice on best practice for a particular scenario, any input would be appreciated :-) Scenario We have two sites, site "A" and site "B". We have a server at both site A and B. Site A is our primary location - all clients

  • Webstart signing error

    hi I have deployed an ADF Swing application using Java Webstart in jdeveloper 10.1.3.3.0 and oracle version 10g. But when i run the application through HTML and it finish the download i get the following message error: JNLPException[category: Error d

  • Is it possible to do Continuous deployment for azure cloud services(website,web and worker roles) using VSO Release management?

    Hi, I am trying to do continuous deployment using visual studio online and release management for Azure cloud services. But not able to find the way to do it(with the help of different blogs, those are describing using VM only). I tried using Release

  • Black setup cartrige low causing alarm. Have XL black already installed

    I have a 7520 Photosmart. It still has the "setup" black ink cartridge and it is causing an ink alarm -- all the others are XL cartridges and all have over 75% ink remaining... Can I just leave that slot blank or do I need a standard black cartridge

  • Prod storage loc field in mrp2 view

    Hi, as i understand materials are stored in mm storage locations. from mm storage locations, materials will be issued to production orders. in this case why we need prod storage loc filed in mrp2 view of the material master? please advise in which sc