Apple Mail specific domain domain \ username does this still work for Mavericks?
THIS DISCUSSION IS ARCHIVED
Where do I include Exchange domain in Mail setup?
10212 Views 8 Replies Latest reply: Aug 18, 2010 2:37 PM by jruano
Level 1 (10 points)
mike_donahue
Jun 2, 2010 4:46 PM
Our company is running Exchange 2007, OWA enabled, EWS is setup, Auto discovery is enable. The only thing I haven't got an answer on is whether Service Pack 4 has been installed. The server is set up with a domain specified but I don't know where to include that in the Mail Account Setup. Mail seems to be locating the server fine but it says username or password can not be verified. I can only assume that it's because I haven't included the domain correctly.
iPad (and I assume iPhone/iTouch) have a field in their setup to include the domain and a coworker is connecting fine with to the company server. Where is it in Mail? I have tried to prepend it to my username (domain/username) but it hasn't worked. I can't recall all the variations I have tried of this, but unless I have the domain first in the username field, Mail won't even connect to the server. I've been all over these boards and dozens more and I can't find any answers to this problem.
Any here have any ideas? Thanks,
Mike D
MacBook Pro, Intel Core 2 Duo 2.66 GHz, Mac OS X (10.6.3), 4 gig RAM
I have this question too (0)
Categories: Mail and Address bookTags: mail_address_book_macosx_v10.6, mac_os_x_v.10.6
Level 7 (22,080 points)
Matthew Morgan Los Angeles, CA
Re: Where do I include Exchange domain in Mail setup?Jun 2, 2010 5:48 PM (in response to mike_donahue)
Here's an article that may help.
http://support.apple.com/kb/HT3748
MattDual 1.8 GHz G5 2.5 GB RAM/MBP 2.26GHz 2GB RAM/iPod nano 4g/iPhone 3GS, Mac OS X (10.6.2), ATI Radeon 9600, Time Capsule, AirPort Express
Like (0)
Level 1 (10 points)
mike_donahue
Re: Where do I include Exchange domain in Mail setup?Jun 2, 2010 9:01 PM (in response to Matthew Morgan)
I already read that one and it fails to address the domain question, but thank you for the suggestion.
MikeMac OS X (10.6.3)
Like (0)
Level 1 (10 points)
mike_donahue
Re: Where do I include Exchange domain in Mail setup?Jun 6, 2010 5:07 PM (in response to mike_donahue)
Bump.
I still haven't found an answer to this. Anyone else have any ideas. Still waiting to hear back from out IT guys about the service pack issues.
Is there any way to attach a screen grab to a post? Thought it might help paint the picture in case I haven't stated it clearly.
Again, thanks in advance for any help with this.
MikeMacBook Pro, Intel Core 2 Duo 2.66 GHz, Mac OS X (10.5.1), 4 gig RAM
Like (0)
Level 1 (0 points)
tf99
Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:00 PM (in response to mike_donahue)
Hi. I'm having precisely the same problem. My Exchange account works like a charm on my iPhone, but all permutations of the same settings simply don't work in OS X Mail (v. 4.3).
Has anyone out there set up an Exchange account with a domain? Can you tell us where you put it to get the account to work?
Thanks!2.0 GHz MacBook, Mac OS X (10.6.4)
Like (0)
Level 4 (2,535 points)
Asatoran
Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:16 PM (in response to mike_donahue)
Enter your username as:
<domain>\<username>
This is standard practice for Microsoft if there's no place to enter the domain name.
(Note the backslash, not the forward slash. Backslash is NOT the one under the question mark on a U.S.A. English keyboard.)MBP 15" Penryn, Mini 2009, Mac OS X (10.6.2)
Like (0)
Level 1 (0 points)
tf99
Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:42 PM (in response to Asatoran)
Thanks Asatoran. That turned out to be part of the solution for me. The other part was changing the port I used for the SSL connection -- it was set wrong at some point, either because the default was wrong, or because I forgot I had changed it in troubleshooting before trying the slash the way you suggest. Anyway, the port number for some reason doesn't show up on my iPhone settings, so it didn't occur to me to tweak it.2.0 GHz MacBook, Mac OS X (10.6.4), 4GB RAM
Like (0)
Level 1 (0 points)
frieiv
Re: Where do I include Exchange domain in Mail setup?Jun 25, 2010 12:06 PM (in response to tf99)
Hi!
Could you please state the port numer you changed from and to?
I´m having the same problem and still can´t access the exchange server outside the company network.
But it seems like Mail 4.3 tryes to use the internal server and never the external? Any tips on this?MacBook Pro, Mac OS X (10.6.4)
Like (0)
Level 1 (0 points)
jruano
Re: Where do I include Exchange domain in Mail setup?Aug 18, 2010 2:37 PM (in response to mike_donahue)
<domain>\<username> worked for me... FINALLY!!
Thanks muchMacBook Pro, Mac OS X (10.6.4), iMac
Quit your mail entirely, then in terminal do:
mv ~/Library/Mail/V2/MailData/Envelope* ~/Desktop
This moves all your "Envelope Index*" files to your desktop. An alternative is deleting the files, but this allows you to keep them as a temporary back-up (you can delete them at-will later). Also, you can move the files from Finder instead of Terminal, if you prefer.
After the files have been moved, re-open Mail
This should re-load all your email messages, updating/restoring the count
While this works, it does not explain the reason the count goes missing, nor does it ensure that the count won't go missing again in the future, but at least it's a temporary workaround.
Similar Messages
-
Problem: Why does this only work for powers of 2?
I wrote this program to create a golf league schedule for, ideally, eight players. However I want it to be flexible enough to permit for other denominations, such as 10 or 12. When I run the program it works perfectly for any number that is a power of 2 (2,4,8,16,32,etc...) but it will not work for other even numbers such as 6,10, or 12. If anyone has any insights it would be most helpful.
*(This is my first post on this forum so if anything looks not quite right or if this post isn't worded exactly how it should be then I apologize in advance)*
Here's the three classes.
public class ScheduleDriver
public static void main(String[] args)
//instance variables
int max; //size of flight matches array
ScheduleMaster master;//instance of class
//get max number of players for flight
System.out.print("Max number of players in this flight:");
max = Keyboard.readInt();
master = new ScheduleMaster(max);
//create weekly schedules for season
master.createSchedule();
//display weekly schedules
master.displayWeekly();
}//end main
}//end ScheduleDriver
public class ScheduleMaster
//instance variables
int maxPlyrs;//maximum number of players in flight
Week[] weeklySchedule;//array of weekly matches
public ScheduleMaster(int plyrs)
//set up instance data and declare array size
maxPlyrs = plyrs;
weeklySchedule = new Week[plyrs];
//set up the size of each week's matches array
for (int pos = 0; pos < plyrs; pos++)
weeklySchedule[pos] = new Week(plyrs);
}//end for
}//end constructor
public void createSchedule()
int count = 0;//index of weeklySchedule array
final int QUIT = -1; //quit value for loop
int flag = 0; //value to continue or exit loop
//for each player A
for (int a = 1; a < maxPlyrs; a++)
//for each opponent of player A
for (int b = (a + 1); b <=maxPlyrs;b++)
//set count/index and reset flag to zero
count = (a - 1);
flag = 0;
//while still haven't found correct week for this match
while (flag != QUIT)
//if at least one of these players are already scheduled
//for a match this week
if (weeklySchedule[count].checkPlayers(a,b) == true)
//if last valid index of array has been reached
if (count == (maxPlyrs - 2))
//reset count/index to zero
count = 0;
else
//incriment count
count++;
}//end if
else
//assign this match to array of matches for week
//and then exit loop
weeklySchedule[count].setMatch(a,b);
flag = -1;
}//end else
}//end while
}//end for
}//end for
//fill in last week/position night
for (int pos = 0; pos < maxPlyrs;pos++)
//set up position match
weeklySchedule[maxPlyrs - 1].setMatch(pos + 1, pos + 2);
//incriment pos
pos++;
}//end for
}//end createSchedule
public void displayWeekly()
//for each week in schedule
for (int pos = 0; pos < maxPlyrs;pos++)
//display header
System.out.print("WEEK " + (pos + 1));
//if pos/index is 0 or even, flight plays front 9
if ((pos % 2) == 0)
System.out.println(" [FRONT 9]");
//else flight plays back 9
else
System.out.println(" [BACK 9]");
//display lines
System.out.println("----------------");
//display week's matches
weeklySchedule[pos].display();
//skip a line
System.out.println("\n");
}//end for
}//end displayWeekly
}//end ScheduleMaster
public class Week
int[] schedule; //array of players involved in matches for week
int max; //max number of players
int count = 0; //number of players currently involved in matches
public Week(int size)
//set up instance data and size of array
max = size;
schedule = new int[size];
}//end constructor
public boolean checkPlayers(int playerA, int playerB)
boolean flag = false; //flag to determine if at least one of
//the players to check are already playing
//this week
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player A matches player already playing this week
if (schedule[pos] == playerA)
flag = true;
}//end for
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player B matches player already playing this week
if (schedule[pos] == playerB)
flag = true;
}//end for
return flag;
}//end checkPlayers
public void setMatch(int playerA, int playerB)
//if array can take more matches
if (count <= (max - 2))
//insert players into array of active players for week
schedule[count] = playerA;
schedule[count + 1] = playerB;
//incriment count of players playing this week by 2
count = count + 2;
}//end if
else
System.out.print("No more matches can be entered!!!");
}//end setMatch
public void display()
//for every even numbered index starting at zero
for (int num = 0;num < max;num++)
//display the player at that position and the next consecutive
//player who will be his opponent for the week
System.out.println(schedule[num] + "VS" + schedule[num + 1] +
//incriment num
num++;
}//end for
}//end display
}//end WeekAh, I have discovered the problem. The reason for the infinite loop was because of the resetting of the counter/index after every successful match entry back to (a - 1). This was causing matches to be put into weeks where they didn't belong, which caused the program to infinitely loop because it couldn't find an appropriate week to place it's next match. The only time the count should be reset back to zero is when a new player A is being processed or the last valid array index has been referenced before an out of bounds exception would be thrown. I'm still not entirely sure why this doesn't occur on powers of 2 but theh again I haven't put too much thought into it having solved the initial problem! :)
Anyways thanks for the input all who posted, much appreciated.
Happy programming!!!! -
Does this video work for everyone?
my client is telling me the video on the home page doesn't
work. it works fine for me. can everyone test it and tell me if its
not working for you? and if not, what computer, os, browser you are
using?
http://www.mrrogershood.com
thanks in advance,
bradI don't know, but it works fine for me. I suspect changing
the keyframe was
important. But then I'm not a Flash expert. One thing you
might do is make
sure the client RELOADS the page so they're not seeing the
cached old page.
Also, the needs to be clicked twice, once to activate it, the
other to start
it. Maybe they're not doing that?
Just some thoughts.
MD
Brhaynes75 wrote:
> it works now????
>
> now im really confused. i did do a few things though. i
used to have
> the website in a "test" subdirectory, maybe the video
was forwarding
> to that. so i just left the
test/images/_videos/index.swf there just
> in case. i also opened up the flash file and tweaked a
few things.
> like, unlocking the layers and putting the opening stop
action on a
> keyframe instead of just a frame. i also changed the
parameters in
> the flash video to point to "/images/_videos/index.swf"
instead of
> "
http://www.mrrogershood.com/images/_videos/index.swf".
maybe one of
> those worked? but the client is still telling me it
doesn't work. =( -
HT4777 Does this actually work for anyone?
I have tried numerous things to get it so my AD users can use the webdav share part of file sharing with no luck. I can use local accounts all day long to access the webdav but if I try with an AD user I get a 503 error with something like WebDAV Nav + on iPad. Have the question posted in multiple places with no luck so far in getting it to work.
Does your ISP/Mailserver support it?
AK -
Does samsung still work for apple
Hi I just want to know if Samsung still gives parts to apple
Thanks.Looks like it.
http://tech.fortune.cnn.com/2014/02/13/apple-map-suppliers-report/
http://images.apple.com/supplier-responsibility/pdf/Apple_Supplier_List_2014.pdf -
Does this setup work for my network
Hello all, here is my setup. I have a 1T USB drive connected to my imac. I use this for the imac backups. I would like to share that drive on the network to backup both my macbook pros. Is that possible or do i need to physically connect each macbook to the drive to run the backup.
Yes, you should be able to do that, as long as the drive is large enough for all the backups (if not, connect another and back one of the Pros to it).
See #22 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum). -
HT201322 Does this method work for the mini iPad ?
Am trying to erase an app from the history of my iPad and it doesn't seem to work. What to do?
If you are on iOS 6 on your iPad then you won't be able to hide it on it (you can't currently permanently delete items from your purchase history), but you should be able to do it on your computer's iTunes
-
Does this SW work for anyone, just purchased it and cannot export the pdf to anything
Help
Hi, Jimmy.
Sorry for the issues you're having. Can you provide some more details so we can try to help you?
Were you able to successfully log into the ExportPDF website?
Were you able to successfully select and upload a PDF?
Did you get an error message or did your export complete successfully and you got a Save button?
Where exactly did the conversion process fail for you?
Dave -
Does LIBGL_ALWAYS_INDIRECT still work for you?
Those of you who have AIGLX-capable video hardware: can you still force accelerated indirect rendering for OpenGL stuff, using LIBGL_ALWAYS_INDIRECT=1, without X freezing solid? Or does LIBGL_ALWAYS_INDIRECT cause a lockup?
Hmm, so this might be a little late to ask but I never really understood what actually happens when the driver detects AIGLX capable hardware and displays somehting like this in Xorg.0.log:
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
Does it use AIGLX or the regular DRI preferably? What about these btw:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
Sorry, also want to ask someone before I go diggin in myself once.
Most importantly, yes LIBGL_ALWAYS_INDIRECT=1does still affects the Xserver. It is switching to indirect rendering as glxinfo suggests while most OpenGL apps such as neverball run just fine still. Sorry, didn't try beryl or anything heh. This is on a mac though using archppc, similar setup what goes for versions though. -
HT1528 This still works in Mavericks!
Thank you for this... The Directory Utility is pretty well hidden away... Could be in the utilities as well!
It doesn't say, but I think it's likely. However I use several other sites with Java chat, and they work perfectly, and I do allow all the regular updates of Java.
I had a look at the link you gave, but I couldn't find anything when I searched "Next Generation Java Plug-in 1.6.0_15". Should I just download a completely new exe, and would I need the two optinal files for kernel and online installation? -
Does iDVD still work under Mavericks?
Has anybody checked it out yet? It sure appears that there's no update coming, so it would be good to know if compatibility will be broken with the OS upgrade.
In the new iMovie select the project you want to export and use the File ➙ Share ➙ File menu option:
Select the size (4:3 for iDVD) in the next window:
and in the next window select the destination of the movie:
Then add it manually to the iDVD project.
OT -
I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4. Does anyone know if this will work for my iphone 5?
here is the link to Apples compatibility guide for it.
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit -
My HP 3054 printer/scanner worked very well for my needs, but today I tried to scan something and I get this message:(com.apple.ImageCaptureCore error -9922.) What does this mean and what can I do to get my scanner to work again?
i have this too on my hp photosmart b210
no one seems to know how to fix it!! -
I accidentally deleted my entire "Send" folder on mail. Don't remember doing this, but it is gone. Any way to recover?
Have you changed the options for Mail Box behaviour in the Mail prefereces? If the option "Store sent mail on server" is disabled, you will not see a "Sent" mailbox. Enable it again, if it is no longer checked. This has to be set for each account in the "Accounts" tab of the Mail Preferences panel.
-
I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these emails to my iCloud account - they will remain into my outgoing folder until I open my wi-fi- …BUT will they be sent when I open my wi-fi connection, or since they are no longer on my server… be deleted for ever!?
This is how IMAP works, if you delete from one device it will also be deleted in the other devices.
iCloud do not backup e-mails.
Maybe you are looking for
-
Accessing Oracle 10g Express with the SqlDbx IDE
Hi, I downloaded Oracle Express a few weeks back. I finally got round to doing something with it. I also installed a free IDE called SqlDbx that I was recommended. When I start up SqlDbx it prmpts me for DBMS Type - I select Oracle Server from a drop
-
I am trying to send some video clips from my 6235 to my home email address and it keeps saying that the maximum messages size is exceeded. Is there anyway that I can get around this problem or even edit the video clips if possible??? Some one help pl
-
Applications crash immediately when I click and drag object. Every time in every Adobe program.
Application crashes when I click and drag object. Any time I am in an adobe program on my new computer (OS X Yosemite 10.10.1, 15 inch macbook pro 2.5gHz) say Illustrator for example, it will be fine until I inevitably need to click and drag somethin
-
Hi, everyone,. I have trouble with my MB Air. MB Air gets freeze after logging-in on desktop screen or waking up from sleep mode. I tried to use recovery mode to reinstall OSX but unsuccessful. The problem can't be fixed and my MB Air even gets worse
-
For same material, same plant might we have different GR processing time. One of the order will have15 day & other will have GR = 20 days Is there any way 2 handle this thing