Apple Map is empty under standard view

I recently joined tmobile using an unlocked iphone 5, and this started happening: when I open apple maps, there is no content under standard view. Satellite view is ok, though. I tried resetting the phone to no avail. Meanwhile, Google's map app works just fine. This is affecting other apps when they link to the Apple Map for location information. Help!

As I said, it started happening after joining tmobile, so the problem may have something to do with that.
IMO, unlikely if it works under Satellite and Google Maps also works. Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Similar Messages

How much cache is available for apple maps & how long do maps remain offline?

Vector maps are stored in iphone 5 so that they can be used offline. This is the only good feature of the ios6 maps but how long do the maps last offline?

Maps Mad wrote:
Vector maps are stored in iphone 5 so that they can be used offline.
Not true. Offline data access is based on the app, which can opt to save maps (vector or raster maps) for use offline. Here's a source of geo apps that work offline http://bad-elf.com/pages/compatible-apps Many are intended for offline use so you download maps for a select country or state/province and needn't worry about internet or mobile phone service.
As of iOS 7.1, Apple Maps stores only the last viewed area necessitating an active data connection (eg, wifi or cellular) to refresh geo-data as navigating. Google Maps can be used easily but the map data must be explictly saved while online.

No map showing in the map app in standard view just arrows,distance and directions on grid okey in hybrid and satellite modes, ios 8 installed just the grid

Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I view all my apple map pushpin Points of Intrest and pictures at once?

Been trying to find a way to view all my Apple Maps Points of Interest pushpins all at once on the map screen. As I drive along routing, or when I zoom in and out of map areas. Saved bookmarks shows a long list, but I can't figure out how to just view all the pushpins on the map, so I can access my favorite locations and notes as I drive or plan a trip.
Maybe create a map pushpin folder to save only pictures related to the saved map bookmarks. And save on phone or skydrive? I still just go by memory. But the list, notes and scenes are getting really numerous. RV campsites, fishing, biking, skiing, services, phone signal, shopping, wifi, laundry, jobs, pictures, and much more.
I have an old HP mini that I like and use with my iphone 4. Have no interest or extra money to be upgrading my devices every time the software/bloatware updates overload otherwise perfectly good phones and laptops. Hope to be able to share with others how to have their phones and computers work for them, instead of the other way around.
Might stay with iPhone and even buy an ipad if they become more univerally compatible, or switch to all windows devices. Not too happy with PCs bloatware programming these days either. My old windows 98 laptop runs some really powerful programs. Wonder how many people would buy Jeeps and such vehicles, if they could not easily drive them on regular city streets or highways?
first posting in online support community in 15 years. Home powered by Solar these days. Can even park next to a street light and charge batteries.
Thanks for reading and any useful info. will try not to lose my login info

Been trying to find a way to view all my Apple Maps Points of Interest pushpins all at once on the map screen. As I drive along routing, or when I zoom in and out of map areas. Saved bookmarks shows a long list, but I can't figure out how to just view all the pushpins on the map, so I can access my favorite locations and notes as I drive or plan a trip.
Maybe create a map pushpin folder to save only pictures related to the saved map bookmarks. And save on phone or skydrive? I still just go by memory. But the list, notes and scenes are getting really numerous. RV campsites, fishing, biking, skiing, services, phone signal, shopping, wifi, laundry, jobs, pictures, and much more.
I have an old HP mini that I like and use with my iphone 4. Have no interest or extra money to be upgrading my devices every time the software/bloatware updates overload otherwise perfectly good phones and laptops. Hope to be able to share with others how to have their phones and computers work for them, instead of the other way around.
Might stay with iPhone and even buy an ipad if they become more univerally compatible, or switch to all windows devices. Not too happy with PCs bloatware programming these days either. My old windows 98 laptop runs some really powerful programs. Wonder how many people would buy Jeeps and such vehicles, if they could not easily drive them on regular city streets or highways?
first posting in online support community in 15 years. Home powered by Solar these days. Can even park next to a street light and charge batteries.
Thanks for reading and any useful info. will try not to lose my login info

How to use street view in apple maps

How do I use street view in apple maps?

You don't. Street View is a Google Maps feature, so you have to use it in the free, downloadable Google Maps app.

HT5429 Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus

Apple Maps Hybrid & Satellite View Blackout

I am using Apple Maps in China .But when i choose Hybrid or Satellite view.It does not show anything except china.All world except china is black out! How can i view the world? This is so ridiculous!

Read here for feature availability by country:
http://www.apple.com/ios/feature-availability/

HT5429 How do I view Apple Maps on Windows and Mac?

Apple must be smoking something good if they think Apple Maps can be improved without allow users of Mac OS, Linux and WIndows computers see and edit the maps somehow.
Which raises the question: how do I edit my Apple maps listing?
On Google Maps it is free and easy to claim and edit Google maps listings.

You don't at this point. It's not available on the Mac or the PC.

How to use data from standard view in Web dynpro for ABAP

Hello:
I have to create an Abap Web Dynpro, and I must use data from a standard view in the new one. Does anybody know what do I have to do?
Thank you and have a happy new year.

Hi Rodrigo,
Firstly, list the Standard component under Component Usage of the Component which you are creating in your View.
Second, In the Custom Component, view, goto context, and try to add the node from the Standard component in to your view.
NOTE: The second step requires a Node in component controller of the Standard Component.
Finally, Now in your view, get the data from that and map the data.
NOTE: To do this, I think you need to call your Standard WDA first and then only your node contains data and it will be passed.
I hope it is helpful.
Regards,
Shashikanth. D

Maps--what happened to street view?

I don't see how Maps in iOS 6 is an improvement. Any way to go back to Google on this?

Sterno wrote:
Sorry, but Streetview is not available using maps.google.com using Safari. That is one more feature that you can kiss goodbye forever now that you have upgraded to iOS6 Maps. That is, unless Google somehow gets Apple to approve a new Maps app.
No — Street View is now available via a browser:
Street View for Google Maps web app goes live

Is it possible to create video material from the new Apple Maps app? Has anyone attempted this?

I'm interested in creating a mini movie/video of key locations on Apple maps. Can you plot, rotate 3D, flyover a number of locations to tell a story and then download it as a movie? Anyone attempted this?

Unless you deleted the previous version, it is retained in the iWork 09 folder in Applications.
Apple no longer supply the previous version of Keynote (it was part of iWorks 09), but it can be purchased on eBay as a DVD disc.
If you want to remove Keynote 6, right click the icon in Applications and select move to trash.
Keynote 6.1 works well, it has some issues with converting from older version files and has some features missing from the previous version but it is usable and stable, I use it every day without any problems.
Keynote 6.1 does have an inspector, its the side panel on the right.
If it is not in view, click either the Format, Animate or Setup buttons top right on the Keynote tool bar.

Getting Error in java mapping: Parsing empty source. Root element expected!

Hi Experts,
   I am using java mapping for schema validation of input message. I have followed all the standard procedures and implemented the java class in the interface mapping.
My interface mapping is like this:
OrderData --->Java Class ---SchemaValidate
                     Mesg Map ---OrderData_to_BAP --->BAPI Msg
So first I want to validate the schema of the input message. If the input message is invalid then XI should throw an exception. Then I use the actual message mapping to map the input order data to the BAPI input parameters.
In the java code I am using xerces parser.
The java code works fine when I run it as a standalone application.
The interface mapping also works fine if I don't include the java mapping. Ofcourse schema validation does not happen.
But when I test the interface mapping by including the java mapping then I am getting the error:
Call method execute of the application Java mapping SchemaValidate
Java mapping SchemaValidate completed. (execute() of SchemaValidate
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Parsing an empty source. Root element expected!
What am I doing wrong? Why it is not getting the root element?
My Java code is as follows:
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.helpers.*;
import org.xml.sax.*;
import org.apache.xerces.jaxp.*;
Sample mapper for SAP-XI
@author Gopal
public class SchemaValidate implements StreamTransformation {
    //Constants when using XML Schema for SAX parsing.
     static final String JAXP_SCHEMA_LANGUAGE =
     "http://java.sun.com/xml/jaxp/properties/schemaLanguage";
     static final String W3C_XML_SCHEMA =
     "http://www.w3.org/2001/XMLSchema";
     static final String JAXP_SCHEMA_SOURCE =
     "http://java.sun.com/xml/jaxp/properties/schemaSource";
Injection of mapping parameters
from integration engine
@param map Map with configuration data
    public void setParameter(Map map) {
Mapping implementation
@param inputStream Input data from integration engine
@param outputStream Output data to integration engine
    public void execute(InputStream inputStream,
                        OutputStream outputStream)
      throws StreamTransformationException {
        try {
              // obtain an object of class javax.xml.parsers.SAXParser,
              SAXParserFactory spf = SAXParserFactoryImpl.newInstance();
              spf.setNamespaceAware(true);
              spf.setValidating(true);
              SAXParser sp = spf.newSAXParser();
              // setup the schema file
              sp.setProperty(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
              sp.setProperty(JAXP_SCHEMA_SOURCE, new File("IOReqMsgSchema.xsd"));
              //parse the input xml using the given schema
              sp.parse(inputStream, new ParseErrorHandler());
        catch(SAXException se) {
          se.printStackTrace();
        catch ( Exception e ) {
          throw new StreamTransformationException( e.getMessage() );
My input message is :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:OrderCreate_request xmlns:ns0="mynamespace">
   <ORDER>HTEST1234567</ORDER>
   <ORDER_TYPE>z001</ORDER_TYPE>
   <ORDER_NAME>Test Order</ORDER_NAME>
   <CO_AREA>INTC</CO_AREA>
   <CCTR_POSTED>1234567890888888888</CCTR_POSTED>
   <CURRENCY>USD</CURRENCY>
   <PERSON_RESP>12345679</PERSON_RESP>
</ns0:OrderCreate_request>
Kindly help! please this is urgent!!!!!!
Thanks
Gopal
Edited by: gopalkrishna baliga on Feb 28, 2008 9:34 AM

Hi Stefan,
   I did the code changes to return output stream and the java code works perfectly in standalone mode in my PC.
   But when I use the same in the Java mapping with XI then It throws an error "Getting Error in java mapping: Parsing empty source. Root element expected!".
My XI J2EE server has JDK1.4.3.11.
Is there any limitation of using SAX parser in XI? If Yes, then which parser should be used for schema validation in XI?
I have included the XSD file for schema validation along with class files in the .jar file. This jar file is then imported in XI repository. Is the XI engine not able to read the XSD file?
Do I have to handle reading XSD file differently? Any suggession how?
Is this parser error due to some security access?
Kindly help me! I have been struggling with this problem since 2 weeks. I will be greatfull to you if you can help me.
Thanks
Gopal

How to get the screenshot of mapview from apple maps server?

Hi,
Can we get the map view screenshot image from apple server?
Acually i am getting the map view screenshot using mapquestapi. Below url is sample url for get the map view screenshot.
http://open.mapquestapi.com/staticmap/v4/getmap?key=Fmjtd%7Cluub256b2d%2Cax%3Do5 -9u829z&center=33.943359,-118.212891&zoom=13&size=380,184&type=map&imagetype=jpe g&pois=blue_1,33.943359,-118.212891
We have to pass the center coordinates of mapview, zoom level, map type, image type and pin color. We will pass these parameters to url then server will return the image.
Is it possible to get the mapview screenshot from apple map server. If possible please provide some sample urls. If not possible then tell me the reason.
Thanks in advance.

James Ward4 wrote:
Press and hold the Power button, and press the Home button, release both simultaneously. You will hear a camera shutter sound. The image will be stored in the Photo app.
https://discussions.apple.com/thread/4250596

How to create new Standard views in BPEL worklist

Hi all,
we want to use the BPEL Sample Worklist and customize it. Among others we want to modify the existing standard views (like "High Priority Tasks" etc.) and add new ones.
According to a tech note ("http://www.oracle.com/technology/products/ias/bpel/htdocs/orabpel_standardviewtechnote.html", actually the only one we found!) on the Oracle Tech Network we modified the XML file (StandardTaskViews.xml) that defines the original standard views.
That xml file is located in the bpm-services.jar file under $[oracle.home]/bpel/system/services/lib.
But when restarting the server all standard views disappeared, even after replacing the changed jar file with the original one!?
So how can we create new standard views!?
Regards
Jan

Ok, thanks.
But what happens if a new user is created after you have set the VIEWOWNER column to all users!? This user won't have that view!? Or is there a chance to set the VIEWOWNER column to something like "ALLUSERS"!?
In our understanding this is exactly what Standard views represent: A view that is available to all users. So it would be very handy if one could easily define new standard views instead of creating a custom view and make it available to all (currently existing) users...
Regards
Jan

Apple map still does not show traffic

Apple map still does not show traffic

Hi there,
I have the same issues with my 4S, can anybody help? :(
The maps just turned a beidge color and slightly green when it set into standard mode, but it's just fine with hybrid & satellite modes.
Oh, the photo maps also appears as the maps on standard mode.

Apple Map is empty under standard view

Similar Messages

Maybe you are looking for