Apple Mini DisplayPort to VGA Adapter flickers

I have 2 Samsung SyncMaster 23 in, HD Displays connected to my Mac Mini. The Display connected via the Mini DP to VGA adapter flickers erratically. This started happening after installing the latest upgrade of OSX Mountain Lion. I called Apple support, they gave me a list of steps to try to fix the problem, which I followed to the letter, to no avail. The problem is annoying, to say the least. I tried to find out if there was a firmware update for the adapter, but I am running the latest firmware (1.03).
I would appreciate any help to solve this issue.

Thank you for your message.
1. Both monitors only have VGA input.
2. The other adapter, Mini-DVI to VGA has always worked properly.
3. The Mini DisplayPort to VGA adapter is an Apple original product I bought at an Apple store. I bought 2 adapters.
4. Actually I have 2 Mini DisplayPort to VGA adapters: The one I use with my Mac Mini, and another adapter I use to connect my Mac Book Pro to a Panasonic projector.
5. I have tried using both adapters, and the flickering problem is present using either adapter.
6. I believe the flickering problem is definitely something that needs to be addressed and solved by Apple. The adapter is its product, and should work as advertised, no matter what version of OSX I am running. Please remember that there was no flickering before I upgraded to the latest OSX Mountain Lion.
7. I do not believe buying an adapter from another manufacturer, as you suggest, would solve the problem.
Thank you for your help.

Similar Messages

Apple Mini DisplayPort to VGA Adapter longer than 4 inches?

My ViewSonic monitor no longer works with my Macbook Air. Did work for six months. Pretty sure it's the knock off cable - loose in Thunderbolt. The only genuine Apple cable I can find is four inches. Are you kidding me? Anyone know if there is a longer one? Thanks.

STOOOOOOPID! Just figured this out. Dipstick...

HT3235 MacBook Air is connected to an external monitor via Apple Mini DisplayPort to VGA Adapter. At one time it worked just fine, now when I plug the monitor into the Mac, the mac screen goes blue and nothing appears on the monitor.

This monitor works, on a PC. Could the connector be bad or the port on the Mac Air? Any ideas?

You have the display set in Extended Desktop mode with the MacBook as the main screen. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to use the MacBook’s keyboard and trackpad to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you can’t see your MacBook screen because it’s broken or the backlight is off use the F7 key to switch between Extended Desktop and Mirror Display.
(From the MacBook User Guide: F7 (video mode toggle key) Switch between dual-display mode (extending the desktop across the built-in display and an external display) and video-mirroring mode (presenting the same information on both displays).

My MacBook screen is stuck in "presentation" mode after using my "Mini DisplayPort to VGA Adapter." How can I fix this?

My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Mini DisplayPort to VGA Adapter-is it reliable?

I have to give a Keynote presentation with my 13" 2009 mid year Macbook Pro, and planned on using an Apple mini displayport to VGA adapter, to connect to the projector. The reveiws I've read about this adapter are pretty dismal. Apparently, they burn out very quickly or just plain fail to work! How risky is this? What are my options?
Thanks in advance for any advice!

my thunderbolt to HDMI set up has failed a few times. Adapters are gonna fail. I've had great luck with a company called "moshi" They've had great support as well. Hope this helps, cheers!

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

Does Mini DisplayPort to VGA adapter support DDC/CI?

I have a Mac Pro and a MacBook5,1.
Mac Pro is attached to a BenQ monitor which supports DDC/CI communication.
With a capable software I'm able to set brightness and contrast of the monitor without using monitor's OSD (thanks to DDC/CI communication).
If I attach the same monitor to my MacBook5,1 with VGA cable through a Mini DisplayPort to VGA adapter, DDC/CI stops working.
I'm no more able to set brightness and contrast and the app reports that monitor isn't DDC/CI capable.
I'm sure its not an issue related to the app that I'm using to set brightness and contrast. It detects correctly both of the monitor (the internal and the external one) and I'm sure that I'm sending DDC/CI commands to the external monitor and not to the internal one.
So, does Mini DisplayPort to VGA adapter support DDC/CI, and therefore passthrough its signal?
Or is it a problem of MacBook and its Mini DisplayPort which does not support DDC/CI at all? I don't think so.
I hope you can help me.
Regards
Andrea

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

Mini DisplayPort to VGA Adapter for new MacBook

Hi,
I have an old MacBook (2 years old) and am planning to upgrade to the new MacBook.
Can my current Mini DisplayPort to VGA Adapter be used for this new MacBook as well?
This is so that I don't have to order another Adapter if they are the same still.
Thanks!
QF

A two-year old MacBook will have a Mini DVI port on it, not a Mini DisplayPort. So you will need a new adapter. Apple Mini DisplayPort to VGA Adapter.

Mini displayport to vga adapter doesn't work. thoughts?

MacBook Pro, OS 10.7.5
apple mini displayport to VGA adapter + VGA cable to tv. galaxy image shows on tv screen, but computer signal doesn't seem to be getting there. have i missed something?
tnx!
Janeai

If it is showing the Galaxy image the signal is getting there. you have it set to Extended desktop. Go into the Dispplay section in System Preferences and chnge it to Mirror display, Check Box near the bottom of that window.

Mini DisplayPort to VGA adapter difficulties

About 3 months ago my mini DisplayPort to VGA Adapter quit working. It was off-brand. Recently bought an Apple replacement and it is also not working. What is wrong?
When I plug it into the laptop, the screen flickers as it used to, as it prepares to interface with a different display type. Then nothing happens and there is no apparent connection with the projector or TV.
Help!

Perhaps the fault is the cable.
Ciao.

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

No image on screen using Mini DisplayPort to VGA Adapter

Received mini today. After unboxing, read through the packet. Then began to hook everything up as directed. I used a Mini DisplayPort to VGA Adapter to connect the monitor from our now dead desktop to the mini. After double checking all connections, I hit the power button. I immediately heard the apple chime. Then the monitor showed the grey apple start up screen. Suddenly the monitor went black and said it was going into sleep mode. I can't get it out of sleep mode when connected to the mini. It is NOT the monitor or the adapter. I plugged the monitor straight into a netbook and it worked. Then, I plugged the monitor using the adapter into my MacBook Pro and also got it to work that way. So I tried replugging the adapter into the mini. Still can't get an image on the screen. I can't complete set up or use mini because I can't get an image. Any suggestions or ideas? I will call apple in the morning if I can't figure it out tonight. But I'm hoping someone can give me suggestions. Thanks for your help!

I had the same issue when I bought my mac mini last week apart from I wasn't even getting the initial grey screen. I went back to the Apple shop and they gave me another mini and fired it up in the shop using the adaptor on an old VGA monitor. It worked perfectly.
When I got home I set it all up again and still had the same issue. I nearly threw out a couple of monitors as I thought they were broken.
However, had a look around the web and found this suggestion:
Shut down the mac and disconnect the adaptor from it. Now fire the mac up and let it boot up FULLY. Once it has had a chance to boot up fully, only then plug the adaptor in.
Worked for me and I haven't had the issue since (touch wood). Hope this helps.

Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Using Mini DisplayPort to VGA adapter -- any settings on the Macbook Air I need to change?

Going into a meeting with my Macbook Air with Mini DisplayPort to VGA adapter, which will be connnected to a video projector on site. Never tried this setup before. Will this just work or do I need to adjust any video settings on my Macbook Air?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Getting a Mini DisplayPort to VGA Adapter & Monitor to Work with an Xserve

First let me say that I'm very new to Xserve's and OS X Server and any help is greatly appreciated.
I have an Xserve with a connected Mini DisplayPort to VGA Adapter and a confirmed working VGA monitor. There is also a keyboard and mouse plugged into the front USB port of the Xserve. The internal SSD has been formatted clean.
I've been trying to boot up from the optical drive on the Xserve using the 10.6 DVD. I use the front panel/system identifier button to boot up and I make sure enclosure lock is unlocked. Each time I try to boot up, the monitor stays off and the DVD is spit out.
I eventually got the DVD to stay in, and the screen showed the grey screen with black apple and the spinning black circle on the bottom. However, after a few minutes the screen turned orange in color. Using Screen Sharing, it looked fine. I tried a second VGA monitor, but that still didn't do it.
So with the DVD still in, I stay connected via Screen Sharing and begin the installation process remotely, thinking Snow Leopard will recognize the monitor eventually. Well, 10.6 is now fully installed, but still no working monitor.
I then decided to try the Mini DisplayPort to VGA Firmware Update. I download and run the installer, but it tells me, "The Updater could not find a Mini DisplayPort to VGA Adapter to update."
How can I possibly get this monitor working?
Thanks in advance.
Message was edited by: nappy

Just ran in to this myself -- Nehalem Xserve running 10.6.2 Server with an MiniDisplayPort to VGA adapter connected to an Avocent Switchview 1000 KVM. Took the server offline to install RAM and after rebooting, no video. Oddly enough, the KVM's LEDs showed a display connected but Apple System Profiler showed no adapters connected to the video card. Nothing seemingly worked -- rebooting, shutdown/restart, and/or hot-plugging the adapter made no difference. I also tried a second MiniDisplayPort adapter to no avail.
Note that the MiniDisplayPort to VGA Firmware update had already been applied to BOTH adapters prior to this issue appearing.
What restored video output on our system: reboot from the Snow Leopard Server install media, video reappears over the adapter, and after that I can reboot from the SSD boot drive running 10.6.2 Server with video output working over the MiniDisplayPort to VGA adapter.

Apple Mini DisplayPort to VGA Adapter flickers

Similar Messages

Maybe you are looking for